• Journal of radiological science and technology
• /
• v.41 no.5
• /
• pp.445-450
• /
• 2018

We aim to evaluate safety of radiation by measuring leakage dose and patient(phantom) incident dose of ZEN-PX II dental portable equipment developed by G company. Measurement for leakage dose of equipment is conducted on the top, at the bottom, on the left, on the right and at the back. Dose measurement incident on the subject with the area dosimeter when using the phantom and measurement the leakage dose of equipment when using the phantom are evaluated. Comparing the right with the highest leakage dose as a 0 cm, 25 cm, 50 cm, 75 cm and 100 cm dose measurement at the measurement height of 100 cm, 64.2 uR was reduced to 47.3 uR in the senser mode 0.32sec. Even in film mode it was measured at 414.4 uR and about 27% lower at 162.6 uR. As the result of this study, when the irradiation time is 2 sec the right side dose is 290.5 uR and sensor mode is 0.32 sec the right side dose is 64.2 uR.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.12 no.2
• /
• pp.69-77
• /
• 2006

Angiography means that a check up to know an abnormal condition in all the blood vessels include from the heart, aortae, cerobrovascular and abdonominal artery to hands and feet. Main examples of this are cerebral angiography, abdominal, liver for urinary anomaly, renovascular angiography, and artery and vein in arms and legs. Angiography uses radial rays or angiography equipment for an image output during interventional procedure and compositive diagnosis. The acts which performed in a projection room have changed drastically. In general, it is performed by using equipment which is attached one or two C-arms and the method of inserting catheter in vein after anesthesia. For this reason, some rooms that consist of angiography room units should be planned not only for expensiveness equipment and facilities also to be germ-free. Nowadays, in the angiography unit case, it is placed independently as the central part of many hospitals. It does not belong to the imaging medical department any more as considering raising filming times and the relation between C.C.U.(coronary care unit) and operation unit. This means the acts performed are diversified and well-organized rooms in support of diagnosis are required. However, it is difficult to plan the angiography room unit due to domestic researches and data on this unit are not enough. Therefore, this study aims at bringing up basic issue for architectural planning of the angiography unit in general hospital.

• Computers and Concrete
• /
• v.9 no.6
• /
• pp.439-455
• /
• 2012

The interaction of plan geometry and structural configuration, a determinative factor in the earthquake behavior of buildings, has become a serious issue in the building industry in Turkey due to the poor seismic performance of R/C buildings during the latest earthquake. Consequently, designing new buildings without structural irregularities against earthquake loads is proving to be more significant. This study focuses on the effects of plan geometries on earthquake performances of buildings. In that respect, structural irregularities in the plan are investigated in detail based on the Turkish Earthquake Code (TEC 2007). The study is based on five main parametric models and a total of 40 sub-models that are grouped according to their plan geometries with excessive projections such as L-shaped, H-shaped, T-shaped and U-shaped models. In addition to these, a square model without any projections is also generated. All models are designed to have the same storey gross area but with different number of storeys. Changes in the earthquake behavior of buildings were evaluated according to the number of storeys, the projection ratios and the symmetry conditions of each model. The analysis of each structural irregularity resulted in many findings, which were then assessed. The study demonstrates that the square model delivers the best earthquake performance owing to its regular plan geometry.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.2
• /
• pp.197-200
• /
• 2004

A 75 year old woman was admitted for evaluation of right lung mass. She was not a smoker. She had been diagnosed as uterine prolapse and during preoperative assessment a lung mass was found incidentally on simple chest X-ray. On chest CT scan, $3.5{\times}2$ cm sized homogeneous mass was located in the anterior segment of right upper lobe and there were multiple calcified lymph nodes in both hilum and mediastinal area. We performed diagnostic bronchoscopy, but no definite endobronchial mass was found. Next we did CT guided percutaneous fine needle aspiration biopsy. On microscopy, sulfur granules consisting of multiple granular basophilic centers with hyaline projection of branching filaments were noted. From this finding we made a diagnosis of pulmonary actinomycosis.

• Journal of the Korean Home Economics Association
• /
• v.44 no.12
• /
• pp.155-165
• /
• 2006

The purpose of this study was to analyse the factor of the variables that contributed to the ego-identity of middle-aged women. The subjects were 751 middle-aged women whose age was from 40 to 60 years old. The instruments used in the study were the assessments of ego-identity, self-differentiation, and internal systems. The data were analysed by using pearson correlation and hierarchical multiple regression. The findings were as follows; (1) In the result of the analysis about relationships with ego-identity, the ego-identity was positively correlated with self-differentiation and the self of internal systems and negatively correlated with the parts of internal systems; (2) Predictors of ego-identity of the middle-aged women ordered occupation type, the level of education, cognitive-emotional function, self integration, family projection process, self, pleasing/abandoned part, and self-harming part. Based on these results, the recommendations for the future research in this area were discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1089-1095
• /
• 2010

We propose an image segmentation method for auto-teaching system of PCB (Printed Circuit Board) assembly inspection machines. The inspection machine acquires images of all components in PCB, and then compares each image with its standard image to find the assembly errors such as misalignment, inverse polarity, and tombstone. The component window that is the area of component to be acquired by camera, is one of the teaching data for operating the inspection machines. To reduce the teaching time of the machine, we newly develop the image processing method to extract the component window automatically from the image of PCB. The proposed method segments the component window by excluding the soldering parts as well as board background. We binarize the input image by use of HSI color model because it is difficult to discriminate the RGB colors between components and backgrounds. The linear combination of the binarized images then enhances the component window from the background. By use of the horizontal and vertical projection of histogram, we finally obtain the component widow. The experimental results are presented to verify the usefulness of the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1536-1543
• /
• 2004

Garment is made by a 2D pattern and should be fitted to a human body which has 3D characteristics. Therefore, to design a pattern more effectively, the use of 3D information of a human body and the investigation of relationship between the 3D garment and 2D pattern are necessary. In this work, ruled surface method was used to reflect the 3D information of a human body for a pattern design. The images of the brassiere line on the woman's dress form were captured by phase-shifting projection moire system and the 3D information on the design line was obtained. 2D patterns on the various parts of the brassiere were developed directly from the 3D data by the ruled surface method. In addition, design line, the area and the amount of dart were quantified. And then we verify the appropriateness of the ruled surface method to the 2D pattern development by measuring the distribution of the space between women's figure and segmented clothing item. It was found that the ruled surface method is useful to transform the 3D design line to the 2D pattern, if we followed the steps suggested in this paper.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.2
• /
• pp.134-137
• /
• 2016

A Killian-Jamieson diverticulum (KJD) is an unfamillar and unusual cervical esophageal diverticulum. This diverticulum originates on the anterolateral aspect of the esophagus through the Killian-Jamieson's area that is formed between cricopharyngeal muscle and the lateral to longitudinal esophageal muscle. Recently, we experienced a patient who was found outpouching lesion on lateral side of left esophagus on the duodenoscopy. Then, a barium esophagography performed and in left lateral position demonstrated a left-sided diverticulum with a frontal projection, highly suggestive of a KJD. There are two ways of surgical approach to manage the KJD. First is external approach, another one is endoscopic approach. In common, external approach has been recommended for the treatment of KJD because of concern of nerve injury. We present a case of KJD that underwent external approach and sternocleidomastoid muscle flap in the management of KJD.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.6
• /
• pp.1-8
• /
• 2000

This paper describes an algorithm for semantic video object tracking using semi automatic method. In the semi automatic method, a user specifies an object of interest at the first frame and then the specified object is to be tracked in the remaining frames. The proposed algorithm consists of three steps: object boundary projection, uncertain area extraction, and boundary refinement. The object boundary is projected from the previous frame to the current frame using the motion estimation. And uncertain areas are extracted via two modules: Me error-test and color similarity test. Then, from extracted uncertain areas, the exact object boundary is obtained by boundary refinement. The simulation results show that the proposed video object extraction method provides efficient tracking results for various video sequences compared to the previous methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.797-800
• /
• 2003

In the current study, the authors propose a method for extracting license plate regions by means of a neural network trained to output the plates center of gravity. The method is shown to be effective. Since the learning pattern presentation positions are defined by random numbers, a different pattern is submitted to the neural network for learning each time, which enables it to form a neural network with high universality of coverage. The article discusses issues of the optimal learning surface for a license plate revered by the learning pattern, the effort of suppression learning of the number and headlight sections, as well as the effect of learning pattern enlargement/reduction and of concentration value conversion. Results of evaluation tests based on pictures of 595 vehicles taken at an underground parking garage demonstrated detection rates of 98.5%.