• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.293-307
• /
• 1998

This study has been divided into two parts, 1) literature review and 2) a case study. Based on literature review and case studies found in Korea and abroad, this study aimed at classifying wildlife passages and establishing their development procedures in order to establish a theoretical ground for the development of wildlife passage as a way to link habitats that have been fragmented by the construction of roads and other developments. The results of the literature review are as follows : 1) Impact of road construction on surrounding ecological environment is found in various aspects. Along with damage of habitats as direct impact, decrease of biodiversity and simplification of species due to limited breeding and movement are cited as possible indirect impact. 2) In order to lessen the impact generated from fragmented habitats, various types of wildlife passage are being developed in Europe and are showing positive results. 3) In Korea, interests on animal passages have been rising recently. The ministry of Environment and local authorities are establishing development plans for the passages. However, practical materials on the usefulness of adoped methods are not available.4) In order to create an effective wildlife passage, decisions have to be made first on basic factors of planning and designing such as ecosystem rehabilitation methods and surveys on wildlife movement routes and habitat environment. Based on this, in a planning and designing stage, the location and type of a passage, size and measures to attract animals and prevent a collision need to be finalized. This should be followed by a series of process of maintenance, management and monitoring after the development. Based on the results of a theoretical study to develop an wildlife passage, Part 2 of this study deals with the results of an experiment through a specific planning and design that includes a process of ecological surveys, site selection, type selection, ecosystem infrastructure, planting design and construction details on an actual study area and presents them as a model project.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.3
• /
• pp.347-357
• /
• 2012

While it is generally possible to install curved panels manufactured in a factory within the permitted error range on an irregular surface frame of concrete or steel, it is difficult and expensive. Freeform architecture is thus designed and constructed differently from formal buildings. In order to more easily and inexpensively actualize freeform architecture, Building Information Modeling (hereinafter referred to as BIM) has recently been applied in the construction industry. However, the related research and case analyses are not sufficient to identify the implications and contributions of freeform buildings in future similar projects. Therefore, this research will study design and construction methods for freeform surfaces, particular the concrete surface frame of freeform buildings based on BIM, focused on the Tri-Bowl project. This study attempts to analyze the pros and cons of each method for the concrete surface frame of the Tri-Bowl, and then presents the lessons learned and implications related to the design and construction process of the freeform architecture. Several implications for design and construction of concrete surface frame of the freeform building, the Tri-Bowl, are found. The first is that manufacturing and installation of a curved concrete frame is precisely performed based on the exact numerical values of materials and installation made using BIM 3D technologies, such as CATIA and Rhino. The second is that close and continuous collaboration among the different participants in the construction of the Tri-Bowl allowed them to cope with virtual conditions. The third is that design and construction processes have changed, and high quality of the surface frame of a freeform building is required.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.158-166
• /
• 2018

The application of the BIM for architectural and structural work accompanied many trials-and-errors on project based on BIM by this time Ten years have passed since BIM issued, but it is not activated. This study suggests ways to activate BIM for architectural and structural work. The reason for choosing the structure construction is as follows. Construction cost is a high proportion of structural construction cost. On the other hand, the number of related materials is small, and the first in the 3D modeling process is structure modeling. And build BIM-based Structural Database by quantity take-off. This study shows the applicability of BIM through practical cases. This study is expected to provide suggestion for the successful implementation of BIM-based projects.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.24-35
• /
• 2012

RFID-based logistics is increasingly adopted in various areas of the construction industry as a technology that can improve effectiveness and efficiency of construction logistics. However, the technology is not widely adopted yet compared to the potential of RFID applications in the construction industry that the existing research has shown. Since the validation and verification of the benefit from RFID applications were biased toward the productivity of managers, more wide aspect of validation and verification is necessary. Therefore, the objective of this paper is to show how much impact the RFID-based logistics management system can have on resource leveling and allocation that have a direct impact on a construction project as well as the managers' productivity improvement that was shown by the existing research. This paper also discusses issues arisen during the test process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.627-635
• /
• 2016

Recently, several construction projects have been built to create residential area, industrial complex and agricultural land on reclaimed on- and offshore regions. Estimating the quantity of filling materials during reclamation is the most curcial factor of the total construction cost of reclamation project. However, the estimation of loss ratio, defined as the ratio of loss amount to overall dumped amount, mostly depends on the empirical methods and formulae based on the material characteristics due to the lack of sufficient literature about the loss ratio according to hydraulic conditions. In this studies the loss ratio of materials considering flow conditions and material characteristics were examined through hydraulic experiments. A series of hydraulic experiments was conducted using five different hydraulic conditions and two types of materials such as sand and anthracite in a horizontal rectangular flume ($13.0m{\times}5.0m{\times}0.10m$), in which a round type revetment was installed. It is found that the loss ratio generally tends to increase with increasing the particle Froude number regardless of the types of materials. Also, when the flow velocity(u) becomes higher than the critical flow velocity ($u_c$), the loss ratios of sand and anthracite are dramtically increased up to 7.4% and 24.4%, respectively. As a future work, more specific mean velocities will be considered to figure out the loss ratio and more accurate estimation of amount of filling materials will be possible to present with confidence.

• Quality Improvement in Health Care
• /
• v.5 no.2
• /
• pp.258-276
• /
• 1998

This study was conducted to justify the "prescribed shelf life" currently used in Samsung Medical Center and give recommendations based on scientific data to adopt for safe and cost-effective storage times for sterile goods Since the early 1970's, predetermined expiration dating policy has been used in Korea on all in-house sterilized products like any other countries; six months for the supplies wrapped in polyethylene peel pouches and two weeks for the rest. Recently, however, the studies suggest that current standards for preserving the sterility can be changing. It looks like we unnecessarily have too-short expiration date of sterilized supplies, that is far from being cost effective. Certainly, this research is an exciting project, especially in Korea, and will be leading and contributing to the paradigm shift of the conservative concept of shelf life for sterile supplies in Korean healthcare facilities. The major goal of this study was placed on the measurement of the recontamination time in packs wrapped in all kinds of wrapping materials used in S.M.C and stored in various conditions for periods ranging from three months to six months, and then develop a practical standard of "shelf life" based on the analyzed data. Objectives: To measure and compare the recontamination time of sterile packs among wrapppers and storage conditions, and develop a practical standard for the shelf life and storage conditions of sterile products. Samples and Method: The sterile integrity was investigated of the total 1,440 sterile sample packs containing gauze strip($1.5cm{\times}0.5cm$) we prepared and wrapped in nine wrapping materials (randomized reprocessed linens, linens reprocessed 99 times, linens reprocessed 120 times, new kraft paper, used kraft paper, new nonwoven fabrics, 6-time reprocessed nonwoven fabrics, new polyethylene peel pouches, used polyethylene peel pouches), and stored in four locations(closed cabinet of one of the typical wards, open shelf of one of ICUs, open shelf of separate storage room in ER, open shelf in OR), for three to six months, respectively in 1998. Each type of packs were opened weekly and the gauze strips inoculated into Brewer's thioglycollate broth at $35^{\circ}C$ for seven days. Results: There was no growth found for any types of the pack and storage conditions studied. Discussion: This study was conducted in an attempt to identify the possibility of extending the current shelf life for sterile goods we use in a sense of cost effectiveness. The findings suggest that we could extend our expiration dates, that means we can save a lot of materials and personnel time meeded for resterilizing, outdating, recleaning, wrapping, and reshelving. Then it will initiate a great reform in the field of healthcare in Korea, and now we are looking forward to this valuable revolution. We are going to continue this study and take all steps need to apply this new concept to our practice, and then trying to extend to other hospitals.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.1
• /
• pp.145-165
• /
• 2020

This study developed teaching-learning materials for 10 class periods that applies design thinking process for the units of 'sustainable consumption' of home economic subject, and examined the learning experience of students in the class. After the classes, reflection journals and in-depth interviews from 276 male and female students in ten classes were analyzed. The main results are as follows: The five steps of the design thinking process of the Stanford University d-School were applied to develop teaching-learning materials for the 'Sustainable Consumption Practice Book Creation Project'. Students' positive learning experience was evidenced through sustainable consumption classes that applied design thinking. The students were able to reflect through the experience of sympathizing with the real problem, and experienced an improvement in problem-solving ability through the process of idea construction and prototyping. Students expressed difficulties in reaching consensus among the members, and in devising ideas and implementing prototypes. Based on the learning experience of students this study, it is suggested that home economic teachers further develop and implement classes of various topics to which design thinking process is applied. A future study may need to verify the effectiveness of home economic classes to which design thinking is applied.

• Journal of Science Education
• /
• v.41 no.1
• /
• pp.80-97
• /
• 2017

The purpose of this study was to develop understanding-oriented materials based on backward course design model and analyze their effects on 'biology and environment' unit of elementary school science. Backward Design starts from a specification of learning outcomes and decisions on methodology and syllabus are developed from the learning outcomes. This method has a strength maintaining consistency between educational contents-evaluation-learning activities and also promoting student's authentic understanding. The 78 students 6th graders participated in this experiments. Data was collected using project activities, the science academic emotion scale and academic achievement. The collected data was analyzed by t-test and ANCOVA analysis using the SPSS 23 statistical program. The following major conclusions were drawn on the basis of data analysis. First, the experimental group showed a relatively accurate understanding of the contents of science but they could not produce creative output in two project activities. Second, the interaction effect of the instruction based on backward curriculum design and science academic emotion was not significant statistically. Third, the experimental group showed a significant improvement in the academic achievement of 'biology and environment' unit.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.233-256
• /
• 2006

The purpose of this study was to analyse between foreign curriculum and our high school industrial technology subject-matter curriculum, to review trend and stream of curriculum revision, and purpose and content system of subject-matter. This study was conducted through reviewing literature; research reference, journal, book, and Web materials. in this study, comparative target country was restricted to Japan, U. S. A., U. K., and N. Z., Australia that administer to similar subject with our industrial technology subject-matter. The major finding of this study were as follows: 1. A similar subject-matter with our industrial technology subject0matter was Japan' 'foundation of industrial technology' and 'project research', U. S. A.' 'technology' and etc, U. K.' 'design and technology', and N. Z.' 'technology', 'New South Wales in Australia' design and technology'. 2. The result of analysis to purpose and strength of subject-matter, our' industrial technology subject-matter was oriented to knowledge, understanding and career search in industrial area. but, the other was emphasized technological problem solving by process-based method with thinking and action. 3. In the curriculum content, our country was treat to content area of a broad industrial world. on the other hand, Japan; relationship between human and technology, environment, process technology and product technology, project research. U. S. A.; technology content standards by knowledge, process and context, U. K., N. Z., and Australia were focused 'design process'. Based on above results, the recommendation can be established as follows: 1. A study on the implementation of industrial technology curriculum. 2. A study on the perception and need assessment of expert and stakeholder about purpose and content system. of industrial technology subject-matter.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1179-1186
• /
• 2018

Objective: The purposes of this study were to evaluate size-specific dose estimate (SSDE) of low-dose CT (LDCT) in the Korean Lung Cancer Screening (K-LUCAS) project and to determine whether CT protocols from Western countries are appropriate for lung cancer screening in Korea. Materials and Methods: For participants (n = 256, four institutions) of K-LUCAS pilot study, volume CT dose index ($CTDI_{vol}$) using a 32-cm diameter reference phantom was compared with SSDE, which was recalculated from $CTDI_{vol}$ using size-dependent conversion factor (f-size) based on the body size, as described in the American Association of Physicists in Medicine Report 204. This comparison was subsequently assessed by body mass index (BMI) levels (underweight/normal vs. overweight/obese), and automatic exposure control (AEC) adaptation (yes/no). Results: Size-specific dose estimate was higher than $CTDI_{vol}$ ($2.22{\pm}0.75mGy$ vs. $1.67{\pm}0.60mGy$, p < 0.001), since the f-size was larger than 1.0 for all participants. The ratio of SSDE to $CTDI_{vol}$ was higher in lower BMI groups; 1.26, 1.37, 1.43, and 1.53 in the obese (n = 103), overweight (n = 70), normal (n = 75), and underweight (n = 4), respectively. The ratio of SSDE to $CTDI_{vol}$ was greater in standard-sized participants than in large-sized participants independent of AEC adaptation; with AEC, SSDE/$CTDI_{vol}$ in large- vs. standard-sized participants: $1.30{\pm}0.08$ vs. $1.44{\pm}0.08$ (p < 0.001) and without AEC, $1.32{\pm}0.08$ vs. $1.42{\pm}0.06$ (p < 0.001). Conclusion: Volume CT dose index based on a reference phantom underestimates radiation exposure of LDCT in standard-sized Korean participants. The optimal radiation dose limit needs to be verified for standard-sized Korean participants.