• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.130-137
• /
• 2012

This study has conducted to develop new gabion wall systems with vegetation base materials for stream bank stability and rapid rehabilitation. Vegetation base materials are primarily compounded with fine soil, organic composts and peat moss as plant fibers, a water retainer and a soil improver. Normally gabion wall systems resist the lateral earth pressures or stream power by their own weight. Therefore, fill material must have suitable weight, compressive strength and durability to resist the loading, as well as the effects of water and weathering. In this project, 100 to 200-mm clean, hard stones are basically specified, and about 50-mm rubbles are also used. Test application of new gabion wall system carried out in the stream bank of a small stream in the Gwangreung experimental forest, belonging to Korea Forest Research Institute (KFRI) in December 16th, 2006. As a result of the analysis of hydraulic stability of new gabion wall system, gabion wall system has highest threshold shear stress when the gabion wall covered by vegetation. New gabion wall system is highly resistant to sliding and overturning because safety coefficients exceed 1.5. As a result of term of slope stability analysis of new gabion wall system by Bishop and Fellenius methods, stability of stream bank was highly increased after the construction of gabion wall. Therefore, new gabion wall system is effective to stabilize unstable stream bank.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.501-506
• /
• 2011

The study and techniques of system engineering have been applied to various fields including space-air, national defense division in advanced countries. Korea is currently in the early stages of introducing system engineering scheme in railway system and national defense division restrictedly. As theory and application of system engineering covers a wide scope, documents management and requirement analysis technology applied to establishment of standard and core unit development of the research target. The techniques which are historical management and trace among standards for establishment of standard are introduced using SE tools and participating agencies shared the information by constructing of database from all documents which are generated from the project. Through the functional analysis of the requirements for the intelligent station monitoring system in basic design stage, established requirements are verified and will be made official announcement as standard of the intelligent station monitoring system.

• Journal of Korean Library and Information Science Society
• /
• v.19
• /
• pp.35-57
• /
• 1992

This study is an attempt to provide some helpful data for the design and the implementation of the expert system for the book-classification based on the analysis of various cases of the classification-expert system models. Following the introduction, the concepts and some features of an expert system were overviewed in the second chapter, on the basis of which the following concrete cases were introduced and analyzed in the third chapter : (1) ACN System for NC, (2) Expert System for NDC, (3) Expert System for UDC, (4) Herba Medica System, (5) Expert System for IPC, (6) Stratcyclode Project, (7) Expert System for Classification of INIS Database, (8) AutoBC System, and etc. In the conclusion, for the development of the classification-expert system, it was turned out that constructing a new system by using an AI language such as Prolog or LISP is more desirable than employing any one of expert system shells. Together it is necessary for the following requirements to be met : (1) The subject concept of a document elicited should be accurate. (2) Not only a domain knowledge but also the knowledge covering all the subjects should be represented in the knowledge-bases. (3) The knowledge-bases should be organized in such a way that the characteristics of the knowledge about classification should be well defined. (4) rule-base consisting of accurate rules about classification should be made. (5) It should be possible for classification code wanted to be generated immediately.

• Journal of the Korean Society for Library and Information Science
• /
• v.32 no.3
• /
• pp.143-156
• /
• 1998

This paper reports the GEM (Gateway to Educational Materials) project whose goal is to develop an operational framework to provide the K-12 teachers in the world with 'one-stop/any-stop' access to thousands of lesson plans, curriculum units and other Internet-based educational resources. To the IS-element Dublin Core base package, the GEM project added an 8-element, domain-specific GEM package. The GEM project employed the conceptual data modeling approach to designing the GEM database, used the Sybase relational database management system (RDBMS) to construct the backend database for storing the metadata of educational resources, and also employed the active server page (ASP) technology to provide Web interfaces to that database. The consortium members catalog lesson plans and other Internet-based educational resources using a cataloging module program that produces HTML meta tags. A harvest program collects these meta tags across the Internet and outputs an ASCII file that conforms to the standard agreed by the consortium members. A parser program processes this file to enter meta tags automatically into appropriate relational tables in the Sybase database. The conceptual/logical schemas of Dublin Core and GEM profile are presented. The advantages of conceptual modeling approach to manage metadata are discussed. A prototype system that provides access to the GEM metadata is available at http://lis.skku.ac.kr/gem/.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.277-283
• /
• 2013

GPS RTK surveying has an issue that the positioning error increases as the base line distance between the reference station and rover station increases. However, nowadays, an accuracy assessment that can handle such issue is surely required because of the modernization of GLONASS, Galileo project, and other improvements of satellite receiving conditions. Therefore, in this research, we compared and analyzed data sets collected with the CORS network, placed at NGII and NDGPS, using Internet RTK surveying in different satellite receiving conditions. As a result, there was a negative effect on the positioning accuracy as the base line distance increases. Furthermore, we could collect quantitative data of the accuracy of RTK surveying. When national-wide GNSS system is fully established, this result will contribute the growth of various GNSS industries including survey industries and land survey industries.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.2
• /
• pp.187-210
• /
• 2012

Pumasi and Cooperative Child Care Sharing have had positive results among participants and show possibilities of spreading out to the community in general. However, performance was not proved where it is clarified, and the experience of 23 local Healthy Family Support Centers have that ran the demonstration project were unable to be collected. It is the point of time when the initial backing up is important but the centers do not have the systematic support. Therefore, this research presents an effective management plan through qualitative research involving Pumasi participants and person in charge. The operation strategies by the stage of the project were as follows: First, in the beginning stage, the person in charge establishes the target and vision of the project. Second, when comprising the Pumasi team, it was necessary to consider their characteristics according to the team organization subjects. Third, it is necessary to extend the turn-off time and provide many programs so that the various populations can participate. Fourth, in the advertising step, word of mouth and individual contact needs to be utilized. Fifth, in a medium or small city or an urban-rural complex area, the person in charge should support the participants' Pumasi activities. Sixth, various programs such as a passive and active parent education program and Pumasi education program for the leader needs to be provided for the activation of Pumasi activities. Lastly, a cooperative child care sharing location needs to be constructed by the duality system of the base space and outer space. In this location, the inside play space for the children is essential.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.66-75
• /
• 2016

Korean Government is implementing green remodeling projects on existing buildings and structures in a way of promoting low carbon green growth. However, the current regulations and systems do not clearly define the scopes and contents of the green remodeling. Also, the lack of the inducement measure is another reason of the low engagement of the private enterprises to the green remodeling business. Therefore, this study proposes a tax exemption plan to promote green remodeling business implementation, with the consideration on practical applicability. And the proposed plan was applied to the green remodeling pilot project case in2 014 and the effect was quantitatively analyzed. The result is expected to be used as a base data to improve the tax exemption benefit system to invigorate green remodeling later.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.143-151
• /
• 2012

This study analyzes United Nations Framework Convention on Climate Change and domestic-foreign support policy for renewable, also confirms the need for sound and sustainable development to minimize adverse impacts on the environment. Main source of greenhouse gas emissions leading to global warming needs to be resolved through the introduction of renewable energy system by developing low-carbon city. Case studies show the directions for practical response to climate change on the basis of introduction of renewable energy. This case studies can be served as the base model that reduces greenhouse gases with the introduction of renewable energy facilities in the new land development project and obtains economic benefits from CDM project.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1743-1753
• /
• 2011

Seoul Metropolitan Government has performed alternative transit system, light rail transit(LRT), for settling the problems of urban public transit system based on conventional bus service and heavy rail transit(HRT). LRT projects of total 8 lines(about 73.6km), including Ui-Sinseol line, have been planned as Build-Transfer-Operate(BTO) projects. For the first LRT, Ui-Sinseol line, however, design of structure had met standard for design of HRT, because of no domestic design code for LRT when participates of Ui-Sinseol project submitted the design proposal. This case study reports a successful example of LRT design minimizing the scale of stations designed in base of HRT code. The problems, like oversized structures compared with LRT vehicles, excessive costs for construction, had been resolved through negotiations with the participates of Ui-Sinseol line. Result suggests that present and future costs for construction and maintenance of the LRT projects in Seoul be considerably reduced in advance.

• International Journal of Advanced Culture Technology
• /
• v.4 no.1
• /
• pp.37-50
• /
• 2016

In recent years, the development and application of green energy resources have attracted more and more /$^*$ 'tention of people. The training room presented here is focused on the terminal applications of a photovoltaic power generation system (PPGS). Through introducing the composition and the general design principles, we aimed at leading the students to master the fundamental skills required for its design, installation and construction. The training room consists of numerous platforms, such as: PPGS, Wind and Photovoltaic Hybrid Power Generation Systems, Wind Power Generation Equipments, Simulative Grid-Connected Power Generation System, Electronic Technology Application of New Energy, etc. This enables the students to obtain their project and professional skills training via assembling, adjusting, maintaining and inspecting, etc., various component parts of the photovoltaic and new energy power generation systems, to further grasp the fundamental and related theoretical knowledge, and to further reinforce their practical and operational skills, so as to improve their problem-analyzing and problem-solving abilities.