• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.21-29
• /
• 1995

The automotive transmission is the principal component of the power transmission system which converts the engine power into the adjustable power for the vehicle driving system. To the unskilled driver the automization of transmission is required for the safety and fuel economy. In this study, the dynamic model of the automotive power transmission system was presented and simulation program and interface board which interface IBM-PC with ECU was devloped. Through the traveling simulation by interfacing ECU with simulation program, the shifting transients are investigated. For verification of simulation experiment was carried out, the results of simulation was agreed well with those of simulation.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.390-396
• /
• 1995

This study was conducted to develop a computer simulation program for trickle application of nutrient solution. A computer simulation program using finite element method was developed to evaluate discharges of emitters on trickle application. The uniformity of application for two different lateral line lengths and three application methods was evaluated by the computer simulation program. The results of this study are as follows. 1. A computer simulation program was developed to determine emitter discharges from a trickle application system and pressures at emitter positions by finite element method and to design a uniform trickle application system. 2. The simulation program developed was verified by experiment. The root mean square error between experimental data and simulated data was 1.1% on the average discharge and it was found that the computer simulation program was an effective tool for the design of a trickle application system of nutrient solution. 3. The uniformity of trickle application system was evaluated for three different methods of supplying nutrient solution with different lateral line lengths. The best uniformity was obtained from the method, which supplies nutrient solution from both ends alternatively for the same period of time.

• Journal of the Korea Society for Simulation
• /
• v.13 no.1
• /
• pp.25-39
• /
• 2004

Simulation has been recognized as one of major application areas of world wide web. Over the last several years, most research has been focused on the development of web-based simulation languages mostly using JAVA and validation of simulation modeling on web with the newly developed languages. In this paper, we develop a tentative web-based simulator for a simple unit-load automated warehouse system, named Web-SAW. In constructing Web-SAW, we program a user interface program, a simulation logic program, and an animation program with JAVA while utilizing the class library functions and embodiment environment of existing web-based simulation languages. Web-SAW simulates the automated warehouse system with the user input about system operation, displays the animation on a static background representing the system, and generates the various textual outputs after simulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.442-445
• /
• 2008

The purpose of this study is making Proto-type development of BIM based Architectural Construction Simulation System. This study suggest a new schedule access method for overcoming limitation of current Simulation Program focused on visualization. The method made from analysis of current Simulation Program. This program is based on Visual Basic .Net language.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.170-180
• /
• 2000

The equation which is related to TXV performance was investigated. On the basis of this equation, the TXV simulation program was developed. Results of the developed TXV simulation program were proven by the experiment on the influence of pressure difference between TXV entrance and exit and equalizing pressure. Simulation results show very good agreement with experimental results, the RMS error between them was 1.83%. The capillary tube simulation program was made by the basic equation of fluid dynamics. Results of this program were proven by data which were experimented previously. The RMS error between simulation results and experimental results was 4.13% .

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.34-39
• /
• 1998

This paper describes the simulation approaches employed for a vector control system of induction motor drive using SIMNON for windows program. SIMNON program tool can solve differential and difference equations for nonlinear dynamical control system. One powerful feature is its ability of allowing integration of individual program modules after each individual module is programed and tested independently. This particular feature is exploited here for an SVPWM inverter drive by real-time modeling and simulation. The suggested programs are provided a simple and complete simulation for induction motor vector drive system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.144-150
• /
• 1996

The purpose of this paper is to develop a simulation program to predict resist prifile in electron-beam lithography, where the main issue is proximity effect. The simualtion program composes of monte-carlo simulation, exposure simulation and development simulation. In nonte-carlo simulation, the absorbed energy in the resist is calculated when one electron is incident into resist, using hybrid model on the basis of the rutherford differential scattering cross section and moller theory. In exposure simulation, the absorbed energy in the resist is calculated when electrons are incident in exposure pattern. In the program, the developed profile depending on time is obtained by string model. The 0.2$\mu$m and the 0.3$\mu$m line and space patterns are experimentally delineated and compared to the simulation results to check the relevance of the program.

• Communications for Statistical Applications and Methods
• /
• v.6 no.1
• /
• pp.251-259
• /
• 1999

The purpose of this study is to develope a program for statistics education. This program deals with simulation which is helpful in understanding some elementary statistical concepts. This program under multimedia environment which includes sound video animation etc. doesn't show only the result but make it possible for students to execute the program by stages. This type of dynamic learning is efficient to overcome the limits of teaching materials or classroom work. Also it can interest students greatly. By executing it the students can understand the method and meaning of simulation and acquire concepts of probability and statistical inference naturally.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.163-168
• /
• 2007

For an accurate computer simulation to motor drive systems, the target mechanical load system driven by a motor needs to be model its characteristics accurately. In general, a load system is modeled simply with system parameters such as approximated system inertia and friction. So, simulation results have some errors compared with experimental results for a real load system. RecurDyn is a mechanics simulation program for 3-dimension analysis to mechanical load systems. From this program, parameters such as a load torque, a system inertia and a viscous friction can be obtained accurately which are required to model a mechanical system. Also, this program operates together Matlab/Simulink which is used to simulate electrical motor drive systems. So, an accurate simulation for the whole system with a motor drive system and a mechanical load is possible. This paper introduces an application of RecurDyn program to an electric forklift drive system using IPMSM(Interior Permanent Magnet Synchronous Motor) and examines the feasibility of co-simulation it with Matlab/Simulink.

• Women's Health Nursing
• /
• v.26 no.1
• /
• pp.19-27
• /
• 2020

Purpose: This study was conducted to develop a simulation-based postpartum care education program for women with postpartum hemorrhage and to verify the effects of the program on postpartum care. Methods: This program was developed according to the ADDIE model of instructional system design, which consists of analysis, design, development, implementation, and evaluation phases. This quasi-experimental study used a non-equivalent control group pre- and post-test design, and data were collected from April 23 to May 4, 2015. To verify the effects of the program, 33 nursing students in the experimental group participated in a simulation program, whereas 31 students in the control group were given a case study. Results: The experimental group had statistically significantly higher scores for clinical performance (t=-4.80, p<.001), clinical judgment (t=-4.14, p<.001), and learning satisfaction (t=-10.45, p<.001) than the control group. Conclusion: The results of this study indicate that the simulation-based postpartum care education program for women with postpartum hemorrhage was effective for developing students' competency, implying that a similar program should be integrated into the clinical training component of the maternal nursing curriculum.