• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.252-257
• /
• 2017

In this paper for developing and implementing the HD level triple streaming hybrid security camera which output the three type of video outputs(HD-SDI, EX-SDI, Analog). We design the hardware and program the firmware supporting the main and sub functions. We use MN34229PL as image sensor, EN778, EN331 as image processor, KA909A as reset, iris, day&night function part, A3901SEJTR-T as zoom/focus control part. We request the performance test of developed security camera at the broadcasting and communication fusion testing department of TTA (Telecommunication Technology Association). We can get the three outputs (HD-SDI, EX-SDI, Analog) from the developed security camera, get the world best level at the jitter and eye pattern amplitude value and exceed the world best level at the signal/noise ratio, and minium illumination, power consumption part. The HD level triple streaming hybrid security camera in this paper will be widely used at the security camera because of the better performance and function.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.181-185
• /
• 2014

The lifetime of a solid-state drive (SSD) is limited because of the number of program and erase cycles allowed on its NAND flash blocks. Data cannot be overwritten in an SSD, leading to an out-of-place update every time the data are modified. This result in two copies of the data: the original copy and a modified copy. This phenomenon is known as write amplification and adversely affects the endurance of the memory. In this study, we address the issue of reducing wear leveling through efficient handling of write requests. This results in even wearing of all the blocks, thereby increasing the endurance period. The focus of our work is to logically divert the write requests, which are concentrated to limited blocks, to the less-worn blocks and then measure the maximum number of write requests that the memory can handle. A memory without the proposed algorithm wears out prematurely as compared to that with the algorithm. The main feature of the proposed algorithm is to delay out-of-place updates till the threshold is reached, which results in a low overhead. Further, the algorithm increases endurance by a factor of the threshold level multiplied by the number of blocks in the memory.

• The Korean Journal of Health Service Management
• /
• v.6 no.1
• /
• pp.129-140
• /
• 2012

The purpose of this study was to identify attitude of hospital nurse's on death with dignity. The subjects of the study were 516 nurses. The data was analyzed by SPSS PC 19.0 program. 1) 82.8% participants agree to death with dignity, and they and their family will ask death with dignity in actual situations. 2) The average score of overall attitude on death with dignity was $3.13{\pm}0.52$. 3) With respect to the general characteristics of participants there were statistically significant difference in total score according to age, Marital Status, education level, religion, career, position, and existence of patients with incurable disease around. 4) With respect to the death with dignity related characteristics of participants there were statistically significant difference in total score according to agreement to death with dignity, request to my death with dignity, in case my family member requests death with dignity. Although many nurses had a positive concept of death with dignity, they still have ethical dilemmas in life-sustaining care. Therefore training programs on moral rights are necessary to provide guidelines foe end-of-life care.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.661-664
• /
• 2007

Examine method to improve web geography information service system because this paper uses XML and presented specific implementation result. Through internet, it planed various geography information that offer in form of service that do not receive restriction of heterogeneous system environment. Also, did thing that is easy when request service about geography information that user need and deliver fast by purpose. Supplement and to improve open-ended and XML of form normalized use and developed existent web geography information service. So that can use map service in web browser without setup of application program that buy expensive GIS software or offer in each company design and implement.

• Journal of the Korean Home Economics Association
• /
• v.48 no.3
• /
• pp.31-41
• /
• 2010

This study analyzes the difficulties that student teachers, beginning teachers and experienced teachers face in the field of kindergarten, and urgent support requests. The total of participants was 372 of this number, 122 were student teachers, 118 were beginning teachers and 132 were experienced teachers. The results showed the difference in difficulties and the needed support requests among student teachers, beginning teachers and experienced teachers. Student teachers had the difficulty of time management, but beginning teachers and experienced teachers had trouble due to the nonexistence of assistant teachers. Student teachers required teaching strategies for starting relationships with children within responsibility. Beginning teachers and experienced teachers regarded the plan, practice, and evaluation of a program as the most needed support request. Collectively, the results revealed that expansion of the practice period is necessary for student teachers so that they can gain experience with children, parents, and the children's education institution with various opportunities as a learning course.

• Journal of Korean Public Health Nursing
• /
• v.21 no.1
• /
• pp.15-24
• /
• 2007

Purpose: The study aim was to provide basic data needed for formulating systematic visiting nursing strategies by comprehending the characteristics and self-care ability of the object families of public health centers in Korea. Method: The research examined 252 families and 339 family members of the vulnerable class that were registered in a visiting nursing program of an urban public health center. The data of 220 families were analyzed using descriptive analysis, t-test, and ANOVA, after excluding any incomplete data. Result: 1. The most frequent characteristics of families were solitary families (52.8%) and financially vulnerable families (87.3%). The most frequent way of family detection was request of the community office. 2. The most frequent type of family problems were vulnerable families (93.2%), followed by patient families (91.0%). 3. The mean score was 11.67 for family self-care ability. 4. The variables of the number of family members, disease type of the patient family members, and the type of vulnerable family showed a significant difference of family self-care ability. Conclusion: This study suggests that vulnerable families demand specific nursing interventions focused on their own problems and that visiting nurses need to obtain and use supportive resources.

• Journal of Korean Home Economics Education Association
• /
• v.7 no.2
• /
• pp.67-77
• /
• 1995

This study aims at seeking the effective career guidance and operational plan. We collected data from questionaries to 305 students of vocational school, and 135 students on vocational course for the recognition of and request for vocational home economics curriculum. Collected data were analysed by frequency, percentage, and X(sup)2, and SPSS/PC(sup)+ program are used for the statistical analysis. 1. The main considerations of students in their decision of course were the accessibility of getting a job, or a higher education aptitude, interest, and so on. They made their own decision in choosing their course, relatively were satisfied with their choices. As for the course after graduation they hoped to come by a job related to their major in order to have3 an opportunity for further education, and teachers stood up for the large extent to which their students are satisfied with vocational training by answering that there would be higher possibility of using their major. 2 The results of the investigation into the desirable home economics vocational training in future showed that students of vocational schools desired for the scientific teaching and learning method. Students on vocational curse requested that the educational system should be supported. And new curricula were those for gerontology. interior design, and cookery and bakery.

• Journal of Digital Contents Society
• /
• v.17 no.4
• /
• pp.235-241
• /
• 2016

EPG (Electronic Program Guide), which was born with the development of digital broadcasting technology, is becoming a successful data service in the environment that a digital broadcasting station operates more than one hundred channels. In the circumstance, the request for the development or renewal of EPG frequently occurs and so the developers are looking for ways to improve the efficiency of the EPG development. This paper addresses the need of the developers by devising an EPG feature model based on FODA and the test-cases for each feature of the model. Utilizing the EPG feature model and the test-cases, the EPG development process, especially the phases of requirement analysing and test-case designing can be improved.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.824-829
• /
• 2011

The mold is widely used for mass production in present industry. Also, product cycle time is faster, for this request, high productivity improvement in mold machining is required. And, In case of mold manufacturing company, the delivery shortening is required to quickly manufacture new product. Therefore, we aim for the delivery shortening though the method of machining time shortening in mold machining. On this paper, first, we made the NC-code of Insert die-casting as the object model using PowerMill. And then, analyzed cutting force by Toolpath in Insert mold machining using Production Module of Advantedge which is cutting force analysis program. After that, we came up with the optimum conditions of productivity improvement throughout the analysis result of before and after optimization of cutting force, machining time variation, and surface roughness by changing min tangential force to 80, 85, 90% of max tangential force.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.613-615
• /
• 2013

Request to provide a service to XML word file recently has been increasing. In this paper, it is converted to an XML file data input (HWP, MS-Office) a Word file, stored in a database by extracting data directly input to the word processor user creates an XML mapping file I to provide a system that. This can be retrieved from the database the required data to previously created forms word processor, to generate a Word file from the application program a word processing document.