• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.39-46
• /
• 2015

An integrated simulation program for an artificial satellite's operation has been developed. The program integrates and simulates orbit mechanics, attitude control, power/energy transition and mass variation. In the early stages of satellite development, this program can be used as a communication tool among design engineers of different fields. As a result, the efficiency to design a satellite is expected to increase. This program has been coded by Modelica language which supports acausal and object oriented programming methods. Libraries are developed for satellite simulation, and simulation results are presented.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권4호
• /
• pp.47-54
• /
• 2001

The simulation program which can predict major performances of the multi-type heat pump system was developed. In order to verify the simulation program, several experimental tests were performed under various recommended conditions. The experimental results show in good agreement with simulation results. The verified simulation program was used to analyze the system performance. The capacities and the COP＇s under the various indoor and outdoor conditions were predicted. Therefore, it may be concluded that the system simulation program developed in this study may be effectively used for the system design and the performance prediction of the multi-type heat pump system.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.145-156
• /
• 1987

A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1013-1016
• /
• 1998

A method for generation of design verification tests from behavior-level VHDL program is presented. Behavioral VHDL programs contain multiple communicating processes, signal assignment statements. So for large, complex system, it is difficult problem to test or simulation. In this paper, we proposed a new hardware design verification method. For this method generates control flow graph(CFG.) and process modeling graph(PMG) in the given under the testing VHDL program. And this method proved very effective that all the assumed design errors could be detected.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.136-141
• /
• 2001

In this study, computer program for the optimum design of two continuous box culvert was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. MMFD is the most efficient one from the viewpoint of convergency and computing time.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.120-127
• /
• 1993

This paper is concerned with the integrated computer program system aiming at efficiently performing the structural analysis and design. The developed computer program system is introduced and applied to a simple two-dimensional structure to show the general concept of the integrated system. Some design modifications and re-analyses are illustrated including local mesh refinement, These show the efficiency in doing design modification and analysis.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.137-146
• /
• 1988

Shrink-rings (stress-rings) are used in the fabrication of compaction dies to increase the allowable pressures for a given die material. This paper proposes a new approach, where the maximum allowable shrinking pressures are calculated on shrinked plans in the radial direction and then the fractional fitting pressures below the maximum shrinking pressures are used as the design values. A computer program, DIECAD, is developed. The paper presents two design cases as examples in order to easily illustrate the design procedures from the computer program DIECAD

• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.40-46
• /
• 2013

In this paper, it has implemented the design for the K-Line Operations Safety Audit(K-LOSA) designed to provide a proactive snapshot of system safety and flight crew performance before an incident and accident. It introduces the a LOSA and ten operating characteristics that have come to define LOSA methodology. According to the LOSA methodology, we explain the conceptual and detail design and implement the prototype for the data collected with LOSA collection tool.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.212-218
• /
• 1999

In this study , Computer programs for the optimum and automation desgin of reinforced concrete box culvert were developed. It was shown that even though the strarting points and optimization method are different the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in the study is reliable and stron. 3D-design drawing can be drawn using automation desgin computer program developed in this study.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.464-468
• /
• 2003

A general program of three dimensional profile design of impellers for centrifugal/fixed-flow compressors is successfully commercialized using Bezier curves and quasi-3D flow analysis methods. Control points for meridional hub and shroud contours and blade camberline angles are arbitrarily changed to give smooth Bezier curves. With specified blade normal thicknesses, contructed geometry is instantly analyzed using flow analysis methods to be checked.