• Korean Journal of Human Ecology
• /
• v.17 no.6
• /
• pp.1225-1236
• /
• 2008

The purpose of this study is to determine the effect of aromatherapy, showing how the composition handling of aromatherapy and abdominal massage treatment reaches body ingredient transformation. The subjects for this research were total 18 middle-aged females in Seoul; aroma massage group of 7 females, aroma inhalation and water bathe group of 5 females, abdominal massage group of 6 females by jojoba oil without any medical effect. This clinic trial was held from July 1, 2008 to Aug.14, 2008. I held this clinic trial under the same condition after and before this clinic. A standard tape and OLYMPIA 3.5 of S hospital were used at the body measuring for subjects after and before clinic trials. I got Average and standard deviation by data analysis by SPSS Win. Ver.14.0. I did paired t-test for the comparison of before and after, and repeated measure ANOVA for between two groups or among three groups'. The verification was held Duncan Test. The results of this study were as follows: 1. Body mass quotient (F=2.86, p= .063) and Body region (F=1.34, p= .279) among three groups showed no meaningful difference, but weight meaningful difference and aroma massage group showed the greatest difference of body measure change quantity. 2. In change quantity of abdomen girth, Waist circumference and WHR, abdomen girth (F=4.56, p= .012) and Waist circumference (F=4.37, p= .031) showed a meaningful statistical difference. The result of subsequent inspection showed that there was a meaningful difference among three groups and aroma massage group was best. 3. In Cell quantity, Body region quantity and Muscle volume, Body region quantity (F=2.76, p= .182) and Muscle volume (F=3.12, p= .054) showed no difference, but Cell quantity (F=3.79, p= .040) showed a meaningful difference. In the comparison of three groups there was no difference, but aromatherapy group showed more change quantity than any other group. According to the result of this study, the composition handling of aromatherapy and body massage was effective in the decrease of Abdominal fatness and Waist circumference, Weight and the increase of Cell quantity. so I suggest that woman use this therapy in the program of obesity management for her health improvement.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.91-96
• /
• 2005

The National Marine Electronics Association(NMEA) is nonprofit-making cooperation composed with manufacturers, distributors, wholesalers and educational institutions. We use the basic port of equipment in order to process the signal from NMEA signal using equipment. When we don't have enough one, we use the multi-port for processing. However, we need to have module development simulation which could multiplex and provide NMEA related signal that we could solve the problems in multi-port application and exclusive equipment generation for a number of signal. For now, we don't have any case or product using NMEA multiplexer so that we import expensive foreign equipment or embody NMEA signal transmission program like software, using multi-port. These have problems since we have to pay lots ci money and build separate processing part for every application programs. Besides, every equipment generating NMEA signal are from different manufactures and have different platform so that it could cause double waste and loss of recourse. For making up for it, I suggest the NMEA multiplexer embodiment, which could independently move by reliable process and high performance single hardware module, improve the memory efficiency of module by designing the optimized Queue, and keep having reliability for realtime communication among the equipment such as main input sensor equipment Gyrocompass, Echo-sound, and GPS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1623-1631
• /
• 2016

There are many researches which analyze vulnerability for combat systems, have been progressing, and apply the analyzed result to reflect on design phase. Recently, there have been requirements for integrating the previous module based researches which conducted independently. In this paper, we propose an integrated vulnerability analysis method for the combat system considering characteristics of threats and protection performance of armors through an analysis of the advanced research. In addition, by applying the proposed method improves the existing hit probability analysis program and we are verified based on scenarios for improving survivability of PKM (Petrol Killer Medium) for vulnerability analysis confirmed the results. The proposed method improves reliability of vulnerability analysis by considering threats and defense ability. Also it able to satisfied with the integration requirements. Furthermore, we became buildup for the development of applied system and the method and integrated vulnerability analysis method for combat systems.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.519-535
• /
• 2012

In order to establish a rainfall-runoff model, calibration of hydrological parameters for the model is very important. Especially, Curve Number(CN), estimated by NRCS method, is a main factor to apply unit hydrograph theory to calculation of peak discharge. For using NRCS method, it is needed selecting AMC because CN is strongly connected with that. In this study, we focus our concern on finding a applicable standard for selecting AMC for CN. For this, three dams which are Boryeong, Habchon, Namgang are selected as target basins to use observed data including rainfall and dam inflow. As a result of this research, it is found that CN must be included as a calibrated parameter to calculate effective rainfall for the rainfall-runoff model. Also, it is preferred to use PWRMSE of HEC-HMS program as a objective function for optimizing hydrological parameters. From the analyzing result of variation of AMC for peak discharge, it is recommended to apply AMC-III to estimation of CN for calculating effective rainfall of design hydrograph.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.96-109
• /
• 2014

The purpose of this study is to sort out the plants in "The Book of Songs", and to analyze the cultural significance of plants from the viewpoint of the symbolic elements and the landscape elements in the 3~11 century BC. The conclusions are as follows. First, there were 147 plant names and 136 plant species in "The Book of Songs", and these results can confirm that the plants were existed in the 3~11 century BC. Second, through analyzing the cultural significance of the plants, cattail, lotus, etc. are the symbol of lovers; peony and willow are the symbol of farewell; bamboo is the symbol of gentleman; and Japanese pepper is the symbol of fecundity. Third, at the viewpoint of the landscape elements, the poplar, dwarf elm, etc. can be used as a place of affection; reed and nepenthe can make a place of melancholy, hazel and chestnut tree, etc. can make a place of power and position, celery and water shield etc. can be used as a place of knowledge. Based on the research of "The Book of Songs", it can help to understand the plants culture in 3~11 century BC, and it will be a useful information for the plant design.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.50-60
• /
• 2014

This study aims to sort out the plants in "Poetry of the South" what is in the written by Qu Yuan in the Kingdom of Chu and to analyze the utility and appreciation of plants. The conclusions are as follows. First, there were 80 plant names and 56 plant species were sorted out, and these results can confirm that the plants were existed in the 340-277 BC. Second, through analyzing the utility of the plants, herba lycopi, basil etc. as the garden plants; lotus, chrysanthemum etc. as the ornamental plants; galangal and cannabis sativa as the present; basil, musa basjoo, etc. as the sacrifice plants. Third, through analyzing the appreciation of the plants, golden birch, chrysanthemum etc. for gustatory appreciation; herba lycopi and pine tree etc. for tactile appreciation; bamboo for sensory appreciation. Forth, through analyzing the token of the plants, calamus and basil etc. are the symbol of personal character noble; wormwood and caltrop etc. are the symbol of villain. Based on the research of "Poetry of the South", it can help to understand the plants culture in 340-277 BC, and it will be a useful information for the plant design.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2005

Embedded systems have a set of tasks to execute. These tasks can be implemented either on application specific hardware or as software running on a specific processor. The design of an embedded system involves the selection of hardware software resources, Partition of tasks into hardware and software, and performance evaluation. An accurate estimation of execution time for extreme cases (best and worst case) is important for hardware/software codesign. A tighter estimation of the execution time bound nay allow the use of a slower processor to execute the code and may help lower the system cost. In this paper, we consider an ARM-based embedded system and developed a tool to estimate the tight boundary of execution time of a task with loop bounds and any additional program path information. The tool we developed is based on an exiting timing analysis tool named 'Cinderella' which currently supports i960 and m68k architectures. We add a module to handle ARM ELF object file, which extracts control flow and debugging information, and a module to handle ARM instruction set so that the new tool can support ARM processor. We validate the tool by comparing the estimated bound of execution time with the run-time execution time measured by ARMulator for a selected bechmark programs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.254-263
• /
• 2012

This study was performed to investigate a hospital nurses' knowledge and attitude about cancer pain management and to make use of base material for education. The research design was descriptive survey study, and the data were collected from 303 nurses who were working at a university hospital. A instrument study was the inventory consisting 107 questionnaires for cancer pain management. The data were analysed by SPSS WIN 18.0. The study showed that the percentage of correct answers for general knowledge about pain was 79.6%, for knowledge about cancer pain was 82.2%, for knowledge about analgesics use was 55.6%, for attitude about pain management was 65.2%, and the percentage of correct answers for each item was 70.7%. The knowledge about analgesics use was significant difference in age, education level, position, years of nursing practice, present place of working, years of present working place, pain education program experience, the attitude about pain management was significant difference in gender, education level and present place of working. Consequently it needs the persistent educational programs development and the clinical application to improve of nurses` knowledge and attitude about cancer pain management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.316-325
• /
• 2018

In this paper, to integrate distributed IT resources and manage human resource efficiently as purpose of cost reduction, infrastructure of wind turbine monitoring system have been designed and developed on the basis of SaaS cloud. This infrastructure hierarchize data according to related task and services. Softwares to monitor conditions via the infrastructure are also developed. Softwares are made up of DB design, field measurement, data transmission and monitoring programs. The infrastructure is able to monitor conditions from SCADA data and additional sensors. Total time delay from field measurement to monitoring is defined by modeling of step-wise time delay in condition monitoring algorithms. Since vibration data are acquired by measurements of high resolution, the delay is unavoidable and it is essential information for application of O&M program. Monitoring target is gearbox in wind turbine of MW-class and it is operating for 10 years, which means that accurate monitoring is essential for its efficient O&M in the future. The infrastructure is in operation to deal with the gearbox conditions with high resolution of 50 TB data capacity, annually.