• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.101-125
• /
• 2002

A lake seismic survey was carried out to investigate possible geohazards for construction of the underground LPG storage at Namyang Lake. The proposed survey site has a land-lake combined geography and furthermore water depth of the lake is shallow. Therefore, various seismic methods such as marine single channel high resolution seismic reflection survey, sonobuoy refraction survey, land refraction survey and land-lake combined refraction survey were applied. Total survey amounts are 34 line-km of high resolution lake seismic survey, 14 lines of sonobuoy refraction survey, 890 m of land refraction survey and 8 lines of land-lake combined refraction survey. During the reflection survey, there were severe water reverberations from the lake bottom obscured subsurface profiling. These strong multiple events appeared in most of the survey area except the northern and southern area near the embankment where seems to be accumulated mainly mud dominated depositions. The sonobuoy refraction profiles also showed the same Phenomena as those of reflection survey. Meanwhile the results of the land-lake combined refraction survey showed relatively better qualities. However, the land refraction survey did not so due to low velocity soil layer and electrical noise. Summarized results from the lake seismic survey are that acoustic basement with relatively flat pattern appeared 30m below water level and showed three types of bedrock such as fresh, moderately weathered and weathered type. According to the results of the combined refraction survey, a velocity distribution pattern of the lake bottom shows three types of seismic velocity zone such as >4.5 km/s, 4.5-4.0km/s and <4.0km/s. The major fault lineament in the area showed NW-SE trend which was different from the Landsat image interpretation. A drilling was confirmed estimated faults by seismic survey.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.955-962
• /
• 2016

Fish-meat gel is an intermediate product used in a variety of surimi-based seafood. One of the most-used raw materials of fish-meat gel is Alaska Pollock due to its high-quality meat in terms of gel strength and texture. However, increasing demand for fish-meat gel, along with overexploitation of the wild catch Alaska Pollock, has put the industry in need of low-cost sustainable alternative sources for fish-meat gel. Pagrus major (PM) is a widely aquacultured fish known for having white meat that is low in fat. The current study compares the quality of fish-meat gel prepared from aquacultured PM to that of high and mid-grade Alaska Pollock fish-meat gel. Gels were compared in terms of gel strength, texture, color, and protein pattern. Results indicated that fish-meat gels prepared from PM were superior to Alaska Pollock fish-meat gels with regard to gel strength, hardness, springiness, chewiness, cutting strength, and breaking force. In addition, although not matching in quality, PM exhibited a cohesiveness, whiteness, and expressible moisture content comparable to Alaska Pollock of both grades. Protein pattern analysis also showed that PM and Alaska Pollock fish-meat gels had similar protein profiles before and after gel preparation. Therefore, P. major is suggested as a potential substitute for Alaska Pollock in fish-meat gel production.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1078-1085
• /
• 2010

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) are bioaccumulative chemicals that are considered to be toxic contaminants based on several epidemiological studies. These chemicals in colostrum were investigated and estimated for their residual consistencies by maternal characteristics like parity and maternal ages. Test subjects were healthy primipara and multipara mothers with a mean age of 31.5 (S.D=3.6) in 2007. Seven isomers of PCDDs, 10 of PCDFs, 4 of non-orthopolychlorinated biphenyls(non-ortho PCBs) and 8 of mono-orthochlorinated polychlorinated biphenyls (mono-ortho PCBs) were analyzed by HRGC/HRMS. From the analyzed data, the mean level of total WHO-TEQs was 9.41 pg TEQ/g lipid, which is significantly lower than the level found in individuals from other countries. The main contributors to the total WHO-TEQs with increasing percentages were 2,3,4,7,8-PeCDF, 1,2,3,7,8-PeCDD and 3,3',4,4',5-PCB (#126), and they accounted for more than 60% of the total WHO-TEQs. PCDFs concentrations and total WHO-TEQs were negatively associated with parity (p<0.05), and maternal age was positively associated with total WHO-TEQs (p<0.01). However, the associations with body mass index (BMI) and fish intake during pregnancy were not significant. These results were suggested that parity and maternal age are an important factor affecting the concentrations of PCDD/DFs and dl-PCBs in these specimens.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.805-810
• /
• 2010

The purpose of this study was to investigate the effect of Sea Tangle supplementation and exercise training on blood glucose and lipid profile in rats. Twenty seven, 4-week old male Sprague-Dawley rats were divided into the control group (C, n=9), sea tangle group (D, n=9) and sea tangle+exercise group (D+T, n=9). Exercise training was performed 5 days a week using a treadmill running program for 6 weeks (5 m/min, 0% grade, 30 min). There was no difference in blood glucose (C: $175.9{\pm}47.5$, D: $173.9{\pm}34.0$, D+T: $165.0{\pm}38.0\;mg/dl$) and triglyceride (C: $251.1{\pm}91.8$, D: $215.0{\pm}90.0$, D+T: $200.0{\pm}89.3\;mg/dl$) among the groups. Total cholesterol value of the D+T group ($81.8{\pm}11.2\;mg/dl$) was significantly lower than that of the C ($103.0{\pm}13.5\;mg/dl$) and D ($102.1{\pm}14.5\;mg/dl$) groups. High density lipoprotein cholesterol (HDL-C) was significantly high in the D+T ($40.9{\pm}9.7\;mg/dl$) group compared with the C ($32.6{\pm}3.8\;mg/dl$) group and D ($31.7{\pm}7.3\;mg/dl$) group. The value of low density lipoprotein cholesterol (LDL-C) for the D ($98.0{\pm}41.0\;mg/dl$) group was statistically lower than the C($114.5{\pm}41.8\;mg/dl$) group, and higher than the D+T ($91.2{\pm}41.7\;mg/dl$) group. In conclusion, sea tangle injection and exercise had a positive effect on blood lipid profiles.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1054-1065
• /
• 2010

SH21B is a natural composition composed of seven herbs: Scutellaria baicalensis Georgi, Prunus armeniaca Maxim, Ephedra sinica Stapf, Acorus gramineus Soland, Typha orientalis Presl, Polygala tenuifolia Willd and Nelumbo nucifera Gaertner (Ratio 3:3:3:3:3:2:2). In our previous study, we reported that SH21B inhibited adipogenesis and fat accumulation in 3T3-L1 cells through modulation of various regulators in the adipogenesis pathway. The aim of this study was to analyze the transcriptome profiles for the anti-adipogenic effects of SH21B in 3T3-L1 cells. Total RNAs from SH21B-treated 3T3-L1 cells were reverse-transcribed into cDNAs and hybridized to Affymetrix Mouse Gene 1.0 ST array. From microarray analyses, we identified 2,568 genes of which expressions were changed more than two-fold by SH21B, and the clustering analyses of these genes resulted in 9 clusters. Three clusters among the 9 showed down-regulation by SH21B (cluster 4, cluster 6 and cluster 9), and two clusters showed up-regulation by SH21B (cluster 7 and cluster 8) during the adipogenesis of 3T3-L1 cells. It was found that many genes related to cell proliferation and adipogenesis were included in these clusters. Clusters 4, 6 and 9 included genes which were related with adipogenesis induction and cell cycle arrest. Clusters 7 and 8 included genes related to cell proliferation as well as adipogenesis inhibition. These results suggest that the mechanisms of the anti-adipogenic effects of SH21B may be the modulation of genes involved in cell proliferation and adipogenesis.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.395-405
• /
• 2009

The maturity of amber matrix and inclusion was studied to explore the effect of heat treatment on the formation of the sun spangle in the transparent Baltic amber from Gdansk, Poland. Optical microscope revealed two types of inclusions in the original amber samples. The inclusions in the amber which had sun spangle were dramatically expanded by the heat treatment, comparing to those without sun spangle which contains fissure and shows different refractive index. The amber sample which didn't show sun spangle after the heat treatment showed a strong carbon related peak in TOF-SIMS spectra and weak oxygen related peak. it means that the maturity of this amber sample is comparatively higher than the one with spangle. The two amber samples show similar IR spectra before the heat treatment. However, the amber which had sun spangle exhibited an additional 1019 $cm^{-1}$ absorption peak and a more intense 887 $cm^{-1}$ peak. The different chemical compositions between the two types of amber is believed to be due to the different absorption spectra between 1000~600 $cm^{-1}$. According to the study of DSC analysis, the two samples show different DSC profiles. Although they have the same geological origin, their geological ages are different and have different chemical compositions. Thus, they exhibited different behavior after the heat treatment. The formation of sun spangle seemed to depend on the difference in the heat expansion rate of amber matrix with different maturity and chemical compositions.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.285-295
• /
• 2014

This study was conducted to survey the epidemiological characteristics and the isolated strains for pathogenic E. coli which was the major causative organisms for food poisoning occurred at school food services in the Gyeonggi-do area during the past three years. We investigated 19 accidents of food-borne disease outbreaks by pathogenic E. coli at school food services from 2010 to 2012. Food-borne disease outbreaks by pathogenic E. coli were usually occurred at direct management type (18 accidents, 95%) and high schools. For the seasonal factors, 13 accidents (65%) were occurred in June to September, especially the end of August and September after the summer holidays. The first patients were occurred on Wednesday (7 accidents, 37%) and Thursday (7 accidents, 37%), and they were mainly reported on Thursday (7 accidents, 37%) and Friday (5 accidents, 26%). The exposure of risk was estimated in Monday (4 accidents, 21%), Tuesday (7 accidents, 37%) and Wednesday (4 accidents, 21%), and kimchi (5 accidents, 50%) was estimated as the food of the high risk responsible for the outbreaks. 98 isolates of pathogenic E. coli consisted of PEC (50%), ETEC (34%), EAEC (15%), and EHEC (1%). The antibiotic resistance of pathogenic E. coli showed in the descending order of ampicilline (40%), nalidixic acid (37%), trimethoprim/sulfamethoxazole (24%), and tetracycline (19%). The antibiotics of second and third generation cephalosporins, cabarpenem, aminoglycosides, and second generation quinolones had antimicrobial susceptibilities and cefalotin, ampicillin/sulbactam and chloramphenicol showed medium resistance at 29%, 25%, and 6% respectively, and 70% of isolates were resistant to more than one antibiotic. By the PFGE analysis, they were classified into nine major groups and 31 profiles with 57% pattern similarity. It was very difficult to find the correlation of antimicrobial susceptibilities and genotype in the small scale-food poisoning, but the similarity of antimicrobial resistance and PFGE patterns in the large scale-food poisoning enabled the outbreaks to estimate the same pathotype of E. coli derived from identical origins.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.441-451
• /
• 2019

This study was conducted to investigate the crop characteristics of 181 sweetpotato germplasms collected from Korea and overseas. The longest shoot vine length was observed in IT232211 (354.8 cm) and the shortest shoot vine length was observed in IT232185 (32 cm). The maximum numbers of shoot branches and nodes were produced by IT232091 (23.0) and IT232174 (67.8), respectively. Differences in Rapid Visco Analyser profiles were observed for pasting parameters such peak, trough, final, breakdown, and setback viscosities; and pasting temperature. The peak and breakdown viscosities were highest in IT232050 and IT232010, at 338.3 and 207.2 Rapid Visco Unit (RVU), respectively. The trough viscosity was lowest in IT232019 at 103.8 RVU. IT232101 had the highest final viscosity (284.6 RVU), and IT232192 had the highest setback viscosity (81.7 RVU). IT232197 had the highest pasting temperature at 86.8℃, and that of IT232134 was lowest at 72.7℃. To evaluate functional substance content, we analyzed 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and total polyphenol content. The highest frequency proportion of starch was in the 10%-15% range (50.8% of the plants), followed by the 5%-10% range (38.1% of the germplasms). Sugar content ranged from 13.5 to 33.3% (23.2% on average); the highest frequency proportion of sugar was in the 20%-25% range (56.9% of the germplasms), followed by the 25%-30% range (25.4% of the germplasms). The highest frequency proportion of water was in the 70%-80% range (52.5% of the germplasms), followed by the 60%-70% range (44.2% of the germplasms). Our results provide basic data for the selection of useful resources and for the development of new sweetpotato varieties.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.69-79
• /
• 2004

In the process of photon treatments, linear accelerators with energies higher than 10 MV produce neutrons through the (${\gamma}$, n) interactions with the composite materials of the linac head md these materials further produce the induced radiations. We investigate the possible risks from these induced radiations especially in the wedge filters to the radiation workers. Wedge filters are used to modify the isodose profiles in the radiation treatment using the linear accelerator and always be handled by the radiation workers. For the background radiation, we measured the radiation in both the waiting room and the outside of the building for two hospitals, S and H. The results of S hospital were $0.11\;{\mu}Sv/hr$ and $0.10\;{\mu}Sv/hr$ for waiting room and outside respectively, and in the case of H hospital, they were $0.12\;{\mu}Sv/hr$ and $0.11\;{\mu}Sv/hr$. Using a survey meter, we measured the radiation from wedge filters inserted in 10 MV and 15 MV Siemens linear accelerators. The time series measurements were done in ${\sim}1$ minutes after exposure of 5 Gy of monitor units for the field size of $25{\times}25cm^2$. The starting value of 10 MV machine was about $3.26\;{\mu}Sv/hr$, which was three times higher than that of 10 MV. The measured radiation was from $^{28}Al$ and $^{53}Fe$ with a half life of 3.5 min. If the treatment patients are $20{\sim}50$ per day and the number of process of wedge filter change per patient is one or two, the annual dose equivalent is $0.08{\sim}0.4\;mSv$ for 10 MV, and $0.27{\sim}1.36\;mSv$ for 15 MV, which are in the range of dose equivalent limits of radiation workers.