• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.273-274
• /
• 2011

• 아태비즈니스연구
• /
• 제13권3호
• /
• pp.245-259
• /
• 2022

Purpose - Studies have been continuously carried out by researchers so far to clarify the factors influencing employee's incivility at work. However, the behavior of employees who are the target of incivility not much has been revealed which behavior affects the experience of incivility. Among them, it is interesting that the effect of OCB, a representative of employees' positive behavior in the workplace, on their experienced incivility has not been investigated. Therefore, this study attempted to clarify the relationship between OCB and experienced incivility that previous studies have not yet discovered. Design/methodology/approach - In the process, the concept of profile similarity was introduced and based on this, it was assumed that the OCB profile similarity between individual and colleagues, not the absolute level of OCB, would affect the experienced incivility and demonstrated this. The analysis was conducted by applying the survey data obtained from 205 employees to hierarchical regression analysis. Findings - As a result of the analysis, it was examined that the absolute OCB value used in previous studies did not significantly affect the experienced incivility, but the higher the similarity level, the less experienced incivility. The implications obtained based on this and future research directions are discussed together in the conclusion. Research implications or Originality - This study is the first one that considers OCB's profile similarity as a antecedent of experienced incivility. OCB profile similarity concept was only treated as a theoretical issue even in very early stage of OCB research stream, but this study examines the significant effect of OCB profile similarity. Moreover, behavioral antecedents of experienced incivility has not been identified well, but this study finds out that OCB can be a behavioral antecedent of experienced incivility.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.212-218
• /
• 2004

The purpose of this study was to quantify the amount of remaining gutta-percha/sealer on the walls of root canals when three types of nickel-titanium rotary instruments (Profile. ProTaper and $K^3$) and a hand instrument(Hedstrom file) used to remove these materials. The results of this study were as follows: 1. In the total time for gutta-percha removal. Profile group was the fastest and followed by $K^3$, Protaper, Hedstrom file group. 2. In case of the evaluation of the volume of remained gutta-percha from radiograph. $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. 3. In case of the evaluation of the volume of gutta-percha remained from stereomicroscope, $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. These results showed that instrumentation using nickel-titanium rotary instrument groups was faster than that using hand instrument group. The effect of gutta-percha removal using Profile group was better than that using Protaper and $K^3$ group in the nickel-titanium rotary instrument groups.

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.658-662
• /
• 2001

후방산란된 초음파의 입사각 의존성을 이용한 표면 결함유형의 평가가 시도되었다. 평탄한 유리위에 순수한 홈, 구리로 채워진 홈, 표면위 붙여진 구리선등의 표면결함 시편에 대한 후방산란 프로파일은 제 1 임계각에서 종파의 산란과 관련된 새로운 프로파일을 보여주었다. 결함에 의한 산란효과가 클수록 후방프로파일들의 정점 위치는 작게 나타났으며 후방복사 프로파일과 정점 위치에서의 파열의 모양은 결함의 유형과 위치에 따라 누수파와 산란파의 복합적 요인에 의해 다른 형태를 보여주었다.

• Journal of Nutrition and Health
• /
• 제29권8호
• /
• pp.881-888
• /
• 1996

The purpose of this study was to determine whether vitamin B6(B6) deficiency affects fuel utilization and blood cholesterol profile with exercise-training. Twenty-four rats were fed a B6 deficient(-B6) diet or a control (+B6) diet for 5 weeks and either exercised(EX) or nonexercised (NE). EX rats were exercised on treadmill(10$^{\circ}$, 0.5-0.8km/h) for 20 minutes everyday. Glucose(GLU), glycogen (GLY), protein(PRO), trglyceride(TG), free fatty acid(FFA), total cholesterl(TC), HDL-cholesterol(HDL-C) and LDL-choleterol(LDL-C) were compared in plasma(P), liver(L) and skeletal muscle(M) of rats. There was a vitamin effect on the level of P-GLU, P-TG, M-TG, L-GLY, L-PRO and an exercise effect on the level of P-PRO, P-FFA, M-PRO, L-GLY, L-TG, P-TC, P-HDL-C, P-LDL-C. Compared to +B6 rats were lower and there were no differences in P-GLU, P-FFA, P-TG. M-GLY, L-TG, P-TC and P-HDL-C. In EX group, the level of P-TG was higher and M-PRO was lower in -B6 rats. There were no differences in M-GLY, L-TG, P-TC and P-HDL-C. These results suggest that a lowered intake of vitamin B6 may impair the adaptation of animals to fuel metabolism related to a decrease of fatty acid oxidation and attenuates the exercise-traning effect on blood lipid profile.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.78-87
• /
• 1999

A mathematical model for the stress free surface profile in Over-Round and Round-Oval grove rolling, which can be used effectively in the calculation of pass area, is presented. The new model has generality, simplicity and accuracy for practical usage. The stress free surface profile of an outgoing stock can be modeled when the maximum spread of it known a priori. The equation for the stress free surface profile is formulated from the linear interpolation of the radius of curvature of an incoming stock and that of roll groove to the axis direction. In developing the analytical model, the effect of rolling temperature and friction between roll and work piece(stock) were not considered since the geometry of roll groove and the incoming work piece were assumed a dominant factor which decides the stress free surface profile of the outgoing stock. A simulation with the analytical model developed also has been carried out to demonstrate the stress free surface profile of the outgoing stock.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.487-490
• /
• 2004

In order to simulate OLED evaporation process, modeling of directional distribution of the vaporized organic materials, film thickness distribution profile and pattern-mask shadow effect are required In accordance with many literatures; all of them except shadow effect modeling are studied and developed. In this paper, modeling algorithm of evaporation shadow is presented for process simulation of full-color OLED evaporating system. In OLED evaporating process the offset position of the point cell-source against the substrate rotation axis and the usage of the patterned mask are the principal causes for evaporation shadow. For geometric simulation of shadow using z-map, the film thickness profile, which is condensed on a glass substrate, is converted to the z-map data. In practical evaporation process, the glass substrate is rotated. This physical fact is solved and modeled mathematically for z-map simulation. After simulating the evaporation process, the z-map data can present the shadow-effected film thickness profile. Z-map is an efficient method in that the cross-sectional presentations of the film thickness profile and thickness distribution evaluation are easily and rapidly achieved.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.126-134
• /
• 1999

In this paper, a new error compensating technique for form-error compensation of rough-surface profile obtained by contact stylus profilometer is proposed. By the method, the real contact points of rough-surface and diamond stylus can be estimated and the measured profile data corrected. To verify the compensation effect, the properties(Ra, RMS, Kurtosis, Skewness) of measured profile data and compensated data were compared. And, the cumulative RMS slope was proposed to assess the compensated effect of upper area of profile. The results show that the measuring error could be compensated very well in amplitude parameters and in proposed cumulative RMS slope by the developed form-error compensating technique.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.97-102
• /
• 2000

We have studied etching characteristic of Ta film using Electron Cyclotron Resonance (ECR) etcher system. Microwave source power. RF bias power. and working pressure were varied to investigate the etch Profile. And we have used two step etching method to acquire the goWe have studied etching characteristic of Ta film using Electron Cyclotron Resonance (ECR) etcher system. Microwave source power. RF bias power. and working pressure were varied to investigate the etch Profile. And we have used two step etching method to acquire the good etch profile preventing the microloading effect.od etch profile preventing the microloading effect.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.418-423
• /
• 2003

The balancing performance of an automatic ball balancer (ABB) in the vertical or horizontal position is studied in this paper. Considering the effects of gravity and angular velocity profiles, a physical model for an ABB installed on the Jeffcott rotor is adopted. The non-linear equations of motion for the rotor with ABB are derived by using Lagrange's equation. Based on derived equations, dynamic responses for the rotor are computed by using the generalized-u method. From the computed responses, the effects of gravity and angular velocity profiles on the balancing performance are investigated. It is found that the rotor with ABB can be balanced regardless of the gravity effect. It is also shown that a smooth velocity profile yields relatively smaller vibration amplitude than a non-smooth velocity profile.