• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.855-868
• /
• 1992

This study was designed to test the possibility of using a standardized lateral facial photographs as a clinical tool which produce the prediction of postsurgical soft-tissue profile changes associated with surgical correction in skeletal CIII patients. The number of the patients involved in this study were 27 in total, including 11 male patients and 16 female patients. A practical method to the utilization of presurgical photo prediction for mandibular prognathic patients has been presented. To predict postoperative facial appearance, montage photographs were superimposed on standard facial reference photos taken preoperatively. Within the limitations of its technology, postoperative predictions generated by this method were of sufficient accuracy, especially mandible and chin area, for clinical use. In addition, they provide valuable communication and diagnostic information which may be used in formulating treatment plan in cases requiring corrective orthognathic surgery. But, the lip changes were somewhat exaggerated by photo prediction. Consequently, the photo prediction seems suitable for planning profile changes in orthognathic surgery that include mobilization of one main mandibular fragment. Futher investigations are needed to determine whether changes of soft-tissues and hard-tissues are sufficiently reproducible so that more meaningful predictive values can be established.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.72-78
• /
• 2009

We propose the separation algorithm to simultaneously measure two-dimensional refractive index distribution and thickness profile of transparent samples using three wavelengths. The optical system was based on the Mach-zehnder interferometer with LD (Laser Diode)-based multi-wavelength sources. A LCR (Liquid Crystal Retarder) was used to obtain interference images at four phase states and then the optical phase of the object is calculated by four-bucket algorithm. Experimental results with a glass rod are provided at the different wavelengths of 635nm, 660nm and 675nm. The refractive indices of the sample are distributed with accuracy of less than 0.0005 and the thickness profile of sample was cylindrical type. This result demonstrates that it is possible to separate refractive index distribution and thickness profile of samples in two dimensions using the proposed algorithm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권4호
• /
• pp.383-390
• /
• 2000

The purpose of this study was to compare the soft tissue movements in facial profile predicted by a computer package with those that had actually accured following a sagittal split ramal osteotomy. The reliability of predicting the results of orthodontic surgical treatment was analysed. The study was based on the serial records of 30 consecutive patients who had been treated by means of a sagittal split ramal osteotomy. The serial lateral cephalometric radiographs used for the study were taken at the following stages: immediate preoperative : immediate postoperative : 6 months postoperative. A superimposition T1, T2-3 was generated to allow visual comparision. The results can be considered in relation to four important parts of the facial profile :the nose, upper lip, lower lip, and chin. The nose & Upper lip:The amount of movement of the upper lipwas not badly predicted for the average case. The lower lip: There was a significant trend over the whole sample for vertical positionof the lower lip to be less well predicted. The chin: The soft tissue movements of the chin were well predicted.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.54-62
• /
• 2017

When gears mesh, shock and noise are produced as results of tooth error and tooth deformation under load. Transmission error (TE) is the most important cause of gear noise and vibration because TEs affect the changes of the force and the speed of gears. Gear tooth modification research plays a positive role in reducing TE and improving the design level and transmission performance of transmission systems. In high-precision manufacturing gear, gear tooth modification is also commonly used to reduce noise in practical applications. In order to study the accuracy of gear transmission, some empirical gear profile micro-modifications are introduced, and a helical gear pair is modeled and analyzed in RomaxDesigner software to investigate the utility of these modification methods. Some of these will be selected as experimental proposals for gear pairs, and these manufactured gears will be tested and compared in a semi-anechoic room later. The final purpose of this study is to find reasonable and convenient empirical formulae to facilitate improved gear production.

• 대한전자공학회논문지SD
• /
• 제48권10호
• /
• pp.62-66
• /
• 2011

본 연구에서는 측정된 S-파라미터를 사용하여 드레인-소스 전압 Vds에 무관한 게이트-소스 overlap 캐패시턴스를 추출하고, 이를 바탕으로 deep-submicron MOSFET의 Vds 종속 게이트-벌크 캐패시턴스 곡선을 추출하는 RF 방법이 새롭게 개발 되었다. 추출된 캐패시턴스 값들을 사용한 등가회로 모델과 측정된 데이터가 잘 일치하는 것을 관찰함으로써 추출방법의 정확도가 검증되었다. 추출된 데이터로부터 overlap과 depletion 길이의 Vds 종속 곡선이 얻어졌으며, 이를 통해 drain 영역의 채널 도핑 분포를 실험적으로 측정하였다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.101-108
• /
• 2016

Endmill fillet cutting at the corner was conducted with the online measurement of cutting forces and tool deflection by a tool dynamometer and an eddy current sensor system. The profile of the machined surface was also compared with the CAD profile with a Coordinate Measuring Machine (CMM) and CALYPSO software. It was found that the end mill cutter with four blades has a better surface profile than that with two blades, and the cutting forces and tool deformation were increased as the cutting speed was increased. When the tool located at the degree $45^{\circ}$ corner was found to conduct the maximum cutting force than started to the point of the workpiece. As it was compared with the CMM and ANOVA analysis result in the case that the cutting force and tool deformation was the maximum, it was found that the result was affected by the spindle speed and the number of blades.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.51-58
• /
• 2006

The necessities for heightening fuel efficiency as well as lightweight design, lead to an increase of the use of aluminum alloys in the automobile industry. Extruded aluminum profile channels are used widely for the design of frame parts as lightweight assemblies, especially if a high stiffness is needed. While many applications can be realized with forming of hollow square-sectioned extruded profiles such as a stretch bending and a hydro-forming, some applications demand the use of a press bending which can be hardly found in the previous study. In this study, by introducing the use of a press bending into car sub-frames, the demands for higher accuracy as well as higher flexible method than the conventional methods will be satisfied. With respect to the design of sub-frames, the process planning was performed from the shape of a sub-frame product. The designed processes were analyzed by the commercial FEM code, DEFORM-3D. Forming dies for the each process were designed and prototypes of sub-frames were manufactured by the verified farming process. In addition, some of the important features of design parameters in the press bending were reviewed.

• Nuclear Engineering and Technology
• /
• 제16권4호
• /
• pp.195-201
• /
• 1984

축방향 비균일 열유량을 가지는 서브쿨드 비등영역에서 첨단적인 mechanistic 모델을 사용하여 기포계수를 정확히 계산하고저 한다. 이 모델에서는 Lahey/Ohama model에서 구한 기포계수에 의존하는 drift-flux계수를 사용하였고 또한 실제 실험치와 비교하여 질량유량에 의존하는 응축계수의 상관식을 구하여 사용하였다. 이 모델은 고 정확도를 증명하기 위해 잘 알려진 실험치들과 비교되었고 최종적으로 고리 1호기 1주기의 고온 연료집합체 기포계수를 계산하므로서 profilefit 모델과 비교되었다. 이러한 계산결과는 실험치와 잘 일치하고 있으며 profile-fit model은 서브쿨드 비등영역에서 기포 계수를 낮게 계산하고 있음이 밝혀졌다.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.59-64
• /
• 2017

Diverter is an essential element in gravimetric calibration method of flowmeter. Error of diverter are influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. That's why, time detection position of diverter is tuned through repetitive test for minimizing error of diverter. Further the diverter must be compared with the other institutions test since the influence on the accuracy of the flow meter used in the test. In this paper, errors (flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location) of diverter are decreased by produced uni-direction diverter and error of gravimetric calibration system is decreased. Uni-direction diverter is calibrated by gravimetric calibration system with precision flowmeter, the flowmeter is calibrated by pipe prover and other institutions and uni-direction diverter is evaluated. Uni-direction diverter is not influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. As a result, Uni-direction diverter can calibrate in wider scope since increasing ratio of maximum and minimum flow rate of uni-direction diverter.

• 한국광학회지
• /
• 제18권2호
• /
• pp.130-134
• /
• 2007

광역의 자유곡면 형상을 나노미터 정밀도로 측정하기 위한 새로운 형상 측정법으로서 곡률에 근거한 형상 측정법을 제안한다. 곡률 형상 측정기는 피측정물을 일정간격으로 스캔하는 간섭계로써 각 국부영역의 형상으로부터 곡률을 획득하여, 이로부터 전 영역의 형상을 복원한다. 제안된 곡률 형상 측정기는 비구면 형상 측정을 위해 개발된 보상 광학계(Null optics)나 국부영역의 형상을 측정하고 결합하는 subaperture-slicking 법에 비해 측정 장비로부터 발생하는 시스템 오차를 근본적으로 제거하는 특징을 가진다. $80mm\times80mm\times25mm$ 작동구간을 갖는 Stewart Platform과 상용 트와이만 그린 간섭계를 이용하여 곡률간섭계를 구성하였으며, 자유곡면의 형상측정을 위한 첫 단계로서 잘 알려진 구면형상을 측정하고, 기존 장비의 측정값과 비교한 결과 32 mm영역에서 최대 56 nm의 차를 보임을 확인하였다.