• Industrial Engineering and Management Systems
• /
• 제13권2호
• /
• pp.231-249
• /
• 2014

This paper discusses a green supply chain with a manufacturer and a collection trader, and it proposes an optimal production planning for remanufacturing of parts in used products with quality classification errors made by the collection trader. When a manufacturer accepts an order for parts from a retailer and procures used products from a collection trader, the collection trader might have some quality classification errors due to the lack of equipment or expert knowledge regarding quality classification. After procurement of used products, the manufacturer inspects if there are any classification errors. If errors are detected, the manufacturer reclassifies the misclassified (overestimated) used products at a cost. Accordingly, the manufacturer decides to remanufacture from the higher-quality used products based on a remanufacturing ratio or produce parts from new materials. This paper develops a mathematical model to find how quality classification errors affect the optimal decisions for a lower limit of procurement quality of used products and a remanufacturing ratio under the lower limit and the expected profit of the manufacturer. Numerical analysis investigates how quality of used products, the reclassification cost and the remanufacturing cost of used products affect the optimal production planning and the expected profit of a manufacturer.

• 한국축산식품학회지
• /
• 제39권3호
• /
• pp.520-520
• /
• 2019

• 한국축산식품학회지
• /
• 제41권2호
• /
• pp.224-236
• /
• 2021

The objective of this study was to investigate the effects of quality grade (QG) on the physicochemical composition and eating quality attributes of pork belly and shoulder butt. Seventy-two growing-finishing crossbred pigs were slaughtered and their carcasses were graded according to the Korean pork carcass grading system. Based on the grading criteria, the carcasses were classified into: QG 1+ (n=23), QG 1 (n=23) and QG 2 (n=26) groups. At 24 h postmortem, belly and shoulder butt cuts were collected from the QG groups and used for analysis of meat quality, flavor compounds and eating quality attributes. Results showed that the variation in fat content among QG was approximately 2% in the both cut types. The QG showed no effects on all the quality traits: cooking loss, pH and color of the belly or shoulder butt (p>0.05). Thirty-five flavor compounds comprising mainly fatty acids oxidation/degradation-derived products (e.g., aldehydes) and only few Maillard reaction-derived products (e.g., sulfur-and nitrogen-containing compounds) were identified. However, the QG showed a minor effect on the flavor profiles in both the belly and shoulder butt. Regarding the sensory quality, no effects of the QG were found on all the eating quality attributes (color, flavor, juiciness, tenderness and acceptability) for both the belly and shoulder butt cuts (p>0.05). Thus, it may be concluded that the current pork carcass grading standards do not reflect the real quality and value of the belly and shoulder butt cuts.

• 품질경영학회지
• /
• 제38권1호
• /
• pp.108-114
• /
• 2010

In this research, we study to find core factor of the perceived quality of internal quality and external quality factors on agriculture products and food industry. By empirical research, we prove that the perceived quality effects to the customer attitude on agricultural products and food Industry. The results of this research can contribute in working-level practical use about quality problem in agriculture products and food industry. The latest interest of customer attitude on agricultural products and food Industry is being rosed.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.152-159
• /
• 2002

An acceptance sampling plan for products manufactured from a production process with variable fraction defective is developed. We consider a situation where defective products have short lifetimes and non-defective ones never fail during the technological life of the products. An acceptance criterion which guarantee the out going quality of accepted products is derived using the prior information on the quality of products. Numerical examples are provided.

• Agribusiness and Information Management
• /
• 제3권1호
• /
• pp.11-22
• /
• 2011

This study describes the development of a web-based system that collects all data generated in the research conducted to set pre-harvest residue limits (PHRLs) for agricultural product safety control. These data, including concentrations of pesticide residues, limit of detection, limit of quantitation, recoveries, weather charts, and growth rates, are incorporated into a database, a regression analysis of the data is performed using statistical techniques, and the PHRL for an agricultural product is automatically computed. The development and establishment of this system increased the efficiency and improved the reliability of the research in this area by standardizing the data and maintaining its accuracy without temporal or spatial limitations. The system permits automatic computation of the PHRL and a quick review of the goodness of fit of the regression model. By building and analyzing a database, it also allows data accumulated over the last 10 years to be utilized.

• 유통과학연구
• /
• 제10권10호
• /
• pp.35-43
• /
• 2012

Purpose - The current analysis has been done in order to verify the difference between consumer attitudes on the distributor's PB products in terms of practical shopping value and attitudes about the product according to its perceived quality. Research design, data, and methodology - The target respondents of this study were those who have bought PB products at large-scale discount stores within the past six months. We asked homemakers, office workers, and students who live in Seoul or Daejon to respond to a questionnaire by filling out self-evaluations, and collected the completed questionnaires. To test the hypothesis, a t-test was carried out by group for 25 percent of the high and low rankings, including a quarter of the total respondents, to verify attitudes toward products and brands, purchase satisfaction, and re-purchase intention according to the practical shopping value and recognized quality of PB products. A variance analysis was conducted to see if there were differences among groups in terms of practical shopping value and perceived quality. Scheffe's back testing was used to identify differences between groups. Results - The result of the investigation of consumer attitudes according to practical shopping value is as follows. First, it was verified that consumer attitudes about PB products increase as practical shopping value increases. Second, there was no significant. Third, it was verified that repurchase intentions for PB products get higher as the practical shopping value of the consumer increases. The following is the result of the investigation of consumer attitudes according to the perceived quality of PB products. First, it was verified that the product attitude improves as the perceived quality of PB products increases. Second, the research confirmed that the brand attitude improves as the perceived quality of PB products increases. Third, consumer satisfaction is higher when the perceived quality of PB products is high. Fourth, this study verified that repurchase intentions for PB products are higher as the perceived quality of the product increases. Finally, the results of identifying differences between groups for perceived quality and shopping value are as follows. It was identified that there were differences in shopping value according to the characteristics of the groups. However, perceived quality does not change according to the characteristics of groups. Conclusions - These results have practical implications for the marketing strategy of PB products in order to satisfy consumer demands and provide a differentiated service by the distributor. In addition, it is suggested that a communication strategy may be necessary to increase brand loyalty and ensure the continual growth and value creation of PB products as symbolic products for distributors.

• 한국지역사회생활과학회지
• /
• 제20권3호
• /
• pp.397-411
• /
• 2009

The use of local product foods and fresh-cut products, the dietitian's recognition, the required items and the quality for school foodservice was investigated to increase the consumption of high-quality agricultural products. Data from 578 elementary schools, 228 middle schools and 116 high schools were collected by school foodservice personnels in each regional Education Administration in Gyeong-gi province. The first criteria of buying food materials was reliability/safety for all school foodservice. The second criteria were the origin of the product and freshness/ripeness for elementary and middle schools and high school, respectively. The most important consideration for selecting a supplier was the quality of the material. The appearance/status of the food was the first factor for buying food materials. The origin and the seasonality were very important for buying farm products. Dietitians in Gyeong-gi province recognized the local products, and used them weekly. The advantages of using local products were the quick supply, freshness and safety. On the other hand, the disadvantages were the lack of information and the uncertainty of supply. Sixty eight percent of the subjects had experienced the high-quality agricultural products in school meals, but the frequency was low. The main reasons for not servicing high-quality agricultural products were the high cost and the lack of trust on the quality. Among fresh-cut products, seasonings and root vegetables were purchased most frequently, but leaf vegetables was 5.7% only. The purchase of fresh-cut products was not frequent, but usually satisfied. The advantages of fresh-cut products were the reduced workload and waste, but the reason for not using them were poor hygiene and the high price. The diverse supply system and the promotion of the local product foods would be necessary since the most food materials were purchased through suppliers. In addition, the problems related to the high cost and distrust should be resolved to expand the consumption of the high-quality agricultural products and the fresh-cut vegetables. The institutions for certifying the quality should be needed to increase the confidence of these products.

• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.283-288
• /
• 2007

The purpose of this study was to investigate how users' perceived benefits of hotel F&B loyalty program affected their relationship quality(trust and satisfaction) and loyalty on hotel products and services(hotel food & beverage products/services) and how their relationship quality(trust and satisfaction) influenced their loyalty. The model was tested in the settings of five-star hotels using a sample of current members of food & beverage membership program. Empirical results confirmed that not only perceived benefits of hotel F&B loyalty program affects users' perceived relationship quality(trust and satisfaction) and loyalty on hotel products and services(hotel food & beverage products/services) but that their perceived relationship quality influences loyalty on hotel products and services(hotel food & beverage products/services). According to the results, complimentary dining coupon and food discount strongly affected relationship quality(trust and satisfaction) and loyalty on hotel products and services(hotel food & beverage products/services). Strategically, it is recommended to appeal those benefits to current and potential members to maximize the loyalty. Also, it should be considered as major factors to re-package hotel F&B loyalty program.

• 한국식품위생안전성학회지
• /
• 제28권1호
• /
• pp.24-30
• /
• 2013

Red ginseng is a widely used dietary supplement and medicinal herb, and there are so many forms of ginseng products including tea, extract, capsule and jelly. The purpose of the present study was to propose some amendments on ginsenoside content of red ginseng products in Korea. For this purpose, we analyzed red ginseng products for simultaneous determination of 26 ginsenosides by ultra performance liquid chromatography with diode array detector. Some developmental aspects of Korea's ginsenoside content standard regulations for red ginseng products are needed to be examined as follows : Firstly, we proposed that four ginsenosides ($Rb_1$, $Rg_1$, Rf and $Rg_3$) would be detected in red ginseng products. Secondly, in case of red ginseng extracts, the sum of $Rb_1$, $Rg_1$ and $Rg_3$ would be 4.0 mg/g. The two proposals are helpful to comprehensive evaluation of quality of red ginseng products. In conclusion, the scientific studies on amendment scheme of ginsenoside content standard regulation of red ginseng product are very important to fortify quality control.