• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.184-184
• /
• 2017

Organic matter is very important and essential factor to maintain productivity of paddy field. But as meat consumption and the demand of grain increase, the demand of forage also increased gradually in Korea. So the amount of organic matter in paddy field have been declined gradually by the reduction of return of rice straw for the forage use for cattle. There is not enough alternative resources for forage, we guess this trend of organic matter decline in paddy field would continue for the time being in Korea. So this study was performed to confirm the variation of organic matter and change of rice yield to select suitable rice cultivars which yield reduction is small in condition of organic matter decrease in paddy field. To confirm the change of rice growth and yield in condition of organic matter decrease in paddy field, we transplanted 10 rice cultivars which yield reduction are small in low fertilizer condition. We transplanted it Buan where double cropping of winter barley continues several years on June 10. Planting density were $70plants/3.3m^2$ Fertilizer amount was $N-P_2O_5-K_2O=9-4.5-5.7kg/10a$ and fertilizer split application of nitrogen was basal-tillering stage-panicle initiation = 50-20-30%. And in the other cultivation management, we observed rice standard culture of NICS. In paddy field where withdraw straws of barley and rice, the organic matter content showed tendency to decrease as the years go on. During rice cultivation season, organic matter decreased little by little, but it increased again after rice harvest season. Rice yield was more in order of Sodami, Chunghaejinmi and Saenuri. We judge that there is an advantage in rice yield of rice cultivars which have later heading date because of suitable ripening temperature. Although Sobibyeo and Shindongjinbyeo showed high yield, head rice yield decreased severely owing to chalky and cracked rice.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.191-197
• /
• 2018

With a population of more than 10 million people worldwide, MegaCity was only three in 1975, but it is expected to grow to 24 in 2013 and more than 30 in 2025 and more than 3 billion worldwide by 2050 It is expected to be absorbed into smart city. Especially in Asia and Africa, urbanization is expected to proceed rapidly. As the urbanization progresses and the population living in the cities increases, there are various problems such as rapid increase of energy consumption, congestion of traffic, various aging of the infrastructure and the like. As a result, smart city is emerging as a new alternative for solving urban problems. Smart City is rapidly expanding with the development of related technologies and can improve costs, improve urban services, improve quality of life, productivity and sustainability. Therefore, this paper analyzes the size and trend of the domestic and overseas smart city market, and analyzes the smart city related policies, trends and case studies of major countries to see the development status and market of smart city related industries, Present a business utilization model.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.646-651
• /
• 2009

In this study, it was intended to prepare a stem volume table (with or without bark) and a stand yield table for Juglans mandshurica, plantations in Chungju, located in Chungcheongbuk-do, Korea. For the calculation of stem volume, we applied Kozak's growth model, which showed the best fitness index (97%). With this model, it was able to prepare the first yield table for Juglans mandshurica in Korea. Site index model, an indicator of forest productivity, was derived by using the Chapman-Richard model, in which the basic stand age was set to 30 years. The resulted site index ranged between 16 and 22. Based on the yield table of Juglans mandshurica resulted from this study, the volume for a 70-year-old stand with a midium site index class was estimated to be $238m^3/ha$, which is $100m^3/ha$ higher than the volume estimated from the yield table of Quercus acutissima. The yield table of oak trees has been used in the estimation of most broadleaf stands in Korea. However, the result of this study indicated that it is necessary to generate a stand yield table for each broadleaf species. The annual $CO_2$ removals of 30-year-old Juglans mandshurica plantations in the ChungJu region was estimated to be $5.84tCO_2/ha$. The stem volume and stand yield table of Juglans mandshurica plantation resulted from this study would provide a good information in decision making for forest management in ChungJu region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1553-1558
• /
• 2012

This study was conducted to investigate the effects of stocking density or group size on feed intake, daily gain, and carcass characteristics of Hanwoo (Korean indigenous breed) steers reared from 7 months to 31 months of age. Thirty Hanwoo steers were divided into four groups with three replicates each (a total of 12 pens). In each group, one (G1), two (G2), three (G3), and four steers (G4) per pen were allocated as treatments. Pen size was $32.0m^2$, and therefore Hanwoo steers in G1, G2, G3, and G4 were reared under different space allowances, i.e. 32.0, 16.0, 10.6, and $8.0m^2$/steer, respectively. Steers were reared following a conventional beef cattle management method in Korea, and were offered a fixed amount of commercial concentrate with ad libitum forages. Results were subjected to analysis of variance with stocking density as the main effect, and significance was declared at p<0.05. Although total feed intake was not significantly altered, it numerically increased in animals of low stocking density (G1) compared to those subjected to high stocking density treatment (i.e. G4). Feed conversion ratio was higher (p<0.05) in G3 compared to G1 and G2. Animals in G1 (low stocking density) grew faster (p<0.05) than those of high stocking density (G3 and G4). Back fat thickness, meat yield index, and meat yield grade were similar among all levels of stocking density. However, longissimus muscle area was larger in G1 and G2 (p<0.01) compared to G3 and G4, and animals in G3 produced smaller carcasses (p<0.05). Carcass quality traits, including marbling score, meat color, fat color, texture, maturity and meat quality grade, as determined by a group of experts, were not significantly different among the treatments. In conclusion, lower stocking density resulted in increased feed efficiency, daily gain, and carcass weight in Hanwoo steers. However it remains unclear whether such differences are the results of stocking density or group size, or a combination of both. Nonetheless, these results confirm previous studies reporting a negative effect of increased stocking density on animal productivity. Further, animal welfare under an intensive farming system in relation to economical return is discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.558-566
• /
• 2020

New Product Development (NPD) is essential for companies' survival, and continuous growth in the rapidly changing, convergence and business environment, and companies need to collaborate with their internal and external partners to improve performance in NPD. This research examined the integrated relationship between NPD (Cross-functional collaboration, and supplier collaboration) and collaborative communication (formality and reciprocal feedback) on corporate performance. The employees who worked in manufacturing for more than one year with experience in NPD were tested. The reliability and feasibility were assessed using the sample 272 data. The results are summarized as follows. First, cross-functional collaboration and supplier collaboration, which are the factors of NPD collaboration, had a significant positive effect on formality. Second, formality and reciprocal feedback had a significant positive effect on reciprocal feedback and corporate performance. Therefore, for successful NPD, manufacturing companies need to establish efficient management strategies and communicate officially and reciprocally to maximize productivity and efficiency based on the reciprocal partnership between suppliers. To accomplish this, companies need to plan effective communication strategies to respond quickly to internal and external partners' needs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.361-371
• /
• 2020

Since the implementation of the sunset law in 2020, concerns have been raised over the reckless development of long-term non-executed urban parks. In this study, the FSDAF method and CASA-NPP model were used to evaluate the annual average NPP of long-term non-executed urban parks in Seoul. Based on this, the carbon loss and economic value were assessed under five development scenarios. The total NPP value of long-term non-executed urban parks, except for the greenbelt area in Seoul, was 4,892.18 t C. In the first scenario, the NPP and cost were 4,892.18 t C of vegetation carbon and 1.18 billion won, 2,548.55 t C of vegetation carbon and 615 million won in the second scenario, 238.94 t C of vegetation carbon and 58 million won in the third scenario, 848.38 t C of vegetation carbon and 205 million won in the fourth scenario, and 1,596.00 t C of vegetation carbon and 385 million won in the fifth scenario. These results are meaningful for evaluating vegetation carbon and economic value loss according to five different development scenarios. The results of this study are expected to be useful for the preparation of measures to minimize the impact of the development of long-term non-executed urban parks.

• The Journal of Information Systems
• /
• v.27 no.1
• /
• pp.153-169
• /
• 2018

Purpose Since human brains catch images faster than texts or numbers, infographics has been widely used in business in the form of "information dashboard" to enhance the efficiency of decision-making. Groupware, however, has neglected the adoption and use of infographics, in particular, in the idea generation process. Given that an overall performance of groupware-based idea generation is no better than that of the (paper-and-pencil-based) Nominal Group Technique, Jung et al. (2010) adopted the notion of infographics in the form of performance feedback to solve the productivity paradox. With the consistent results, which demonstrate beneficial effects of infographics on performance enhancement, an interesting observation that groups with the bar chart treatment performed better than groups with the dot chart treatment was made. The main purpose of this study was to find if there were a performance consistency between the outcomes from the previous study and the outcomes from the current study. Design/methodology/approach In experiment 1, we employed the same system used in the previous study (i.e., Jung et al., 2010). As individuals' contributions accumulated, the mechanism visually displayed individuals' performances two-dimensionally in the form of a bar chart or a dot chart. Then, we compared the performance outcomes from this study to the outcomes from previous study (i.e., Jung et al., 2010). In experiment 2, we modified the performance graph to test the effect of "playfulness" on performance by converting dots to car images. Then, we compared the performance outcome from experiment 2 to the outcomes from experiment 1. Findings Just like our interesting (and unexpected) finding in Jung et al.'s study (2010), the outcome confirmed a consistent superior performance of a bar chart. This implies that a bar chart is a better choice when stimulating performance with a visual aid in the context of groupware-based idea generation. Although a bar chart was criticized in a way that errors of length-area judgments are 40 ~ 250% greater than those of positional judgments along a common scale, such illusion turned out to be facilitating upward performance comparison better. Regarding Experiment 2, the outcome showed that the revised-dot graph is as good as the bar graph in terms of quantity and quality score of ideas. We attribute the performance enhancement of the resized-dot to the interaction between the motivational characteristic and the situational characteristic of playfulness because individuals in the revised-dot graph treatment performed better than individuals in the dot graph treatment. Given the order of performance (Bar >= Revised Dot > Dot) that the revised-dot treatment performed the same as (or lower than) the bar treatment, an additional research is warranted to reach to a consistent outcome.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.163-176
• /
• 2020

Promoting job growth and quality has been central to developing countries to reduce poverty for decades. In this regard, Nepal is not unique in its need to develop effective TVET programme as it is considered showing positive association with workforce development and productivity. While the copious academic literature has highlighted upon staff training programme in general education, it encounters lack of adequate attention in the field of TVET education. The purpose of the study is to identity and prioritise the professional development needs for the teachers of TVET sector in Nepal. A sample(N=317) of Nepalese teachers from seven provinces were asked to answer the scale. The Borich needs assessment model was employed to assess the perceived level of importance and present preferred training modules among 29 teaching subjects. Moreover, a quadrant analysis using 2×2 matrix was used as a diagnostic tool to denote overriding training topics. The result shows that following competence skills constructs were perceived to be in high need of enhancement as well as in existence of discrepancies: 'occupational characteristics of TVET trainer', 'training needs analysis and curriculum development', 'curriculum development based on national competence standard(NCS)', and 'Institution management evaluation'.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.209-223
• /
• 2020

Executions of SCM in a chemical company of which divisions produce petrochemicals, compounds, batteries, IT material and medicine directly affect their own profit. Execution level of SCM or optimization is very important. This work presents activities of SCM and optimization of inefficient issues in several industrial divisions using mathematical optimization method. The meaning is not only academic research but also making a useful tool which active partner deals with in his work. It is explained how to do beforehand and afterward optimization problem. The benefits are mentioned in the sections. The first of examples would be cover supply plan optimization, optimal profit business plan, and scheduling of a stretching process of polarizer based on minimizing raw material loss in polarizer production. The second example would be cover the optimization of production/packaging plans to maximize productivity of Poly Olefin processes, and the third example is minimization of transition loss in the production of battery electrodes. The fourth example would be cover scheduling of vessel approaching to berth. Because transportation of large portion of raw material and products of petrochemical industry is dealt with vessel, scheduling of vessel approaching to berth is important at the shore of large difference of tide. The final example would be scheduling problem to minimization of change over time of ABS semi products.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.