• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2000

This experiment was conducted to investigate the effect of feeding monensin on the growth performance and ruminal fermentation characteristics of Han-Woo cattle. Seventy two uncastrated Han-Woo male cattle(BW 267 kg) were randomly allotted to 0, 22, and 33 ppm monensin treatments, three replicates per treatment and eight heads per replicate. Animals were kept in an open barn for an 140-d feeding trial, Concentrates containing different levels of monensin and rice straw cut in 15cm length were fed ad libitum separately. The results obtained from this study were summarized as follows. 1. No significant difference was found in daily gain by monensin feeding. 2. Monensin did not affect the total feed (concentrate + roughage) intake: however, as the monensin level increased, the total feed intake tended to decrease, resulting in 5 % reduction in 33 ppm monensin treatment. 3. Although no significant difference was found among three treatments, 22 and 33 ppm monensin improved the feed efficiency(total feed/gain) by 5.2 % and 5.1 %, respectively, as compared to the 0 ppm monensin treatment. 4. Monensin did not affect the concentrations of ruminal total VFA and acetic acid consistently. Although not significant, monensin feeding of 22 and 33 ppm caused marked increase in ruminal propionic acid concentration, 13.8 % and 19.3 %, respectively. Ruminal butyric acid concentration decreased as monensin level increased. Monensin feeding, regardless of level, decreased the A/P ratio by 12.5 %. In conclusiuon, monensin feeding increased the propionic acid concentration, and decreased the butyric acid concentration and A/P ratio in the rumen. Animals fed monensin consumed less feed, causing the improvement in feed efficiency. Thus, monensin appeared to be a useful feed additive, directing the rumen fermentation in a more productive way. Feed efficiency improved similarly both in 22 and 33 ppm monensin treatments, indicating that 22 ppm might be good enough rather than the 33 ppm monensin level.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.49-60
• /
• 1996

In order to evaluate soil factors affecting the growth of Italian poplar, 23 areas planted with Italian poplar were surveyed. These 23 areas were classified into 3 categories, river-side, fallow-land and hill-side. The growth performance and soil factors for each area were investigated. The growth of Italian poplar at river-side was shown to be superior to that of fallow-land and fill-side. The rates of growth for fallow-land and hill-side are decreased by 8% and 21% compared to those of river-side, respectively. This suggests that plantation of Italian poplar at hill-side would not be profitable. Soil conditions of high productive area appeared liquid phase 20%, porosity 45%, water holding capacity 35 - 40%, soil hardness $1kg/cm^3$. pH 6 and rich in organic matter and total nitrogen. The results of factor analysis for soil factors affecting to Italian poplar growth that showed eigenvalue over 1 and communality value over 70% explained factor 1 : liquid phase, porosity and water holding capacity, factor 2 : pH and calcium, and factor 3 : soil hardness. This suggests that physical characteristics of soil is more important than chemical characteristics for Italian poplar growth. Multiregerssion analysis was conducted between diameter growth and soil hardness, liquid phase and calcium. The t-values for each independent variables showed significance at 1 - 10% level, but water holding capacity and pH are not significant. It is supposed that sites suitable to Italian poplar were alluvial plain of sandy loam or part of banking soil, well-ventilating soil, lower soil hardness, apposite soil moisture absorbing with about 100cm of ground water level, plentiful organic matters and total nitrogen and little acidity soil.

• Journal of Ginseng Culture
• /
• v.3
• /
• pp.90-118
• /
• 2021

Gaeseong fostered the conditions necessary for modern capitalism, as huge capital was accumulated through the cultivation and trade of ginseng, which were activities that flourished in the 18th century. During the Japanese colonial era, ginseng merchants were not simply limited to acquiring landowner capital from ginseng trade but actively converted such resource to productive and financial capital, thereby becoming modern entrepreneurs. Ginseng merchants led the joint management and investment of Gaeseong Electric Co., Ltd., Daehan Cheonil Bank, Gaeseong Brewing Co., Ltd., and Songgo Textile Company, founded in the early 20th century. They pursued corporate profits and, as leading individuals of society, spearheaded regional development by supporting educational and cultural projects in Gaeseong. These projects included the establishment of the Gaeseong Commercial School, the publication of Goryeo Times, and the operation of the Gaeseong Jwa Theater. Although liberal economics prioritized shareholder interest, the 21st century witnessed an emphasis on social responsibility among stakeholders asthe major purpose of enterprises. A trend that emerged was ESG (environment, social, governance) management, in which non-financial factors are valued more highly than financial performance. A successful business, which was denoted only by high profits in the past, is now defined by whether a company fulfills its social responsibility. In the early 20th century, the corporate activities of ginseng merchants in Gaeseong reflected entrepreneurship and stakeholder-centered ESG management, which later emerged as essential elements of modern business management. The modern management philosophy ahead of its times stemmed from the regionality of Gaeseong. The political discrimination against Gaeseong residents in the Joseon Dynasty precluded them from becoming government officers, and under a strict social hierarchy, yangban ("noblemen"), the intellectuals of the Joseon Dynasty, were forced to serve as merchants. Son Bong-sang and Kong Seong-hak, aside from being representative ginseng merchants, were both Confucian scholars and writers. The second and third generations of ginseng merchant families who had received higher education abroad returned to Gaeseong to carry on with their family businesses, then established modern companies with capital accrued from the ginseng industry. An analysis of the commercial activities of ginseng merchants in the early 20th century confirmed that these individuals were pioneering entrepreneurs who adopted the ESG management philosophy. In ginseng merchants, one sees a dimension of capitalism with a human face, as with ginseng thatsaves human life.

• Korean small business review
• /
• v.42 no.4
• /
• pp.69-102
• /
• 2020

Shedding new light on the research trend on entrepreneurial ecosystems in the 40-year history of the Asia Pacific Journal of Small Business, this study aims at exploring a potential measurement framework of ecological inputs and outputs in an entrepreneurial ecosystem that promotes entrepreneurship at geographical and spatial levels. As a result of the analysis of research on the entrepreneurial ecosystem in the journal, we found that prior studies emphasized the managerial importance of various ecological factors on the premise of possible causalities between the factors and entrepreneurship. However, empirical research to verify the premised causality has been underexplored yet. This literature gap may lead to unbalanced development of conceptual and case studies that identify requirements for successful entrepreneurial ecosystems based on experiential facts, thereby hindering the generalization of the research results for practical implications. In that there is a growing interest in creating and operating productive entrepreneurial ecosystems as an innovation engine that drives national and regional economic growth, it is necessary to explore and develop the measurement framework for ecological factors that can be used in future empirical research. Hereupon, we apply a conceptual model of 'input-output-outcome-impact' to categorize individual environmental factors identified in prior studies. Based on the model. We operationalize ecological input factors as the financial, intellectual, institutional, and social capitals, and ecological output factors as the establishment-based, innovation-based, and performance-based entrepreneurship. Also, we propose several longitudinal databases that future empirical research can use in analyzing the potential causality between the ecological input and output factors. The proposed framework of entrepreneurial ecosystems, which focuses on measuring ecological input and output factors, has a high application value for future research that analyzes the causality.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.145-158
• /
• 2023

Constructed wetlands (CWs) are effective technologies for urban wastewater management, utilizing natural physico-chemical and biological processes to remove pollutants. This study employed a bibliometric analysis approach to investigate the progress and future research trends in the field of CWs. A comprehensive review of 100 most-recently published and open-access articles was performed to analyze the performance of CWs in treating wastewater. Spain, China, Italy, and the United States were among the most productive countries in terms of the number of published papers. The most frequently used keywords in publications include water quality (n=19), phytoremediation (n=13), stormwater (n=11), and phosphorus (n=11), suggesting that the efficiency of CWs in improving water quality and removal of nutrients were widely investigated. Among the different types of CWs reviewed, hybrid CWs exhibited the highest removal efficiencies for BOD (88.67%) and TSS (95.67%), whereas VSSF, and HSSF systems also showed high TSS removal efficiencies (83.25%, and 78.83% respectively). VSSF wetland displayed the highest COD removal efficiency (71.82%). Generally, physical processes (e.g., sedimentation, filtration, adsorption) and biological mechanisms (i.e., biodegradation) contributed to the high removal efficiency of TSS, BOD, and COD in CW systems. The hybrid CW system demonstrated highest TN removal efficiency (60.78%) by integrating multiple treatment processes, including aerobic and anaerobic conditions, various vegetation types, and different media configurations, which enhanced microbial activity and allowed for comprehensive nitrogen compound removal. The FWS system showed the highest TP removal efficiency (54.50%) due to combined process of settling sediment-bound phosphorus and plant uptake. Phragmites, Cyperus, Iris, and Typha were commonly used in CWs due to their superior phytoremediation capabilities. The study emphasized the potential of CWs as sustainable alternatives for wastewater management, particularly in urban areas.