• Asian-Australasian Journal of Animal Sciences
• /
• 제30권2호
• /
• pp.187-191
• /
• 2017

Objective: An experiment was conducted to examine the effect of dietary supplementation of dried and ground foliage of black gram (Vigna mungo L.) on feed intake and utilization, and production performance of crossbred lactating cows. Methods: Eighteen lactating crossbred (Bos taurus${\times}$Bos indicus) cows (body weight $330.93{\pm}10.82kg$) at their second and mid lactation (milk yield $6.77{\pm}0.54kg/d$) were randomly divided into three groups of six each in a completely randomized block design. Three supplements were formulated by quantitatively replacing 0, 50, and 100 per cent of dietary wheat bran of concentrate mixture with dried and ground foliage of black gram. The designated supplement was fed to each group with basal diet of rice straw (ad libitum) to meet the requirements for maintenance and milk production. Daily feed intake and milk yield was recorded. A digestion trial was conducted to determine the total tract digestibility of various nutrients. Results: The daily feed intake was increased (p<0.05) with the supplementation of black gram foliage. Although the digestibility of dry matter, organic matter, crude protein, and ether extract did not vary (p>0.05), the fibre digestibility was increased (p<0.05), which ultimately improved (p<0.05) the total digestible nutrients content of composite diet. Although, the average milk yield (kg/animal/d) and composition did not differ (p>0.05) among the groups, milk yield was increased by 10 per cent with total replacement of wheat bran in concentrate mixture with of black gram foliage. The economics of milk production calculated as feed cost per kg milk yield (INR 10.61 vs 7.98) was reduced by complete replacement of wheat bran with black gram foliage. Conclusion: Black gram foliage could be used as complete replacement for wheat bran in concentrate mixture of dairy cows in formulating least cost ration for economic milk production in small holders' animal production.

• Journal of Microbiology and Biotechnology
• /
• 제24권2호
• /
• pp.168-176
• /
• 2014

The morphology of filamentous fungi closely correlates with the productivity in submerged culture. Using itaconic acid (IA) production by Aspergillus terreus as a research model, the quantitative relationship between the growth form of A. terreus and IA production was investigated. IA fermentation was scaled up from shake flasks to a 7 L stirred tank bioreactor based on the quantitative relationship. Our results demonstrated the following: (1) Three morphologies of A. terreus were formed by changing the inoculum level and shape of the flask. (2) Investigation of the effects of the three morphologies on broth rheology and IA production revealed the higher yield of IA on dry cell weight (DCW, IA/DCW) and yield of glucose on DCW (consumed glucose/DCW) were achieved during clump growth of A. terreus. (3) By varying the $KH_2PO_4$ concentration and culture temperature, the relationships between clump diameter and IA production were established, demonstrating that the yield of IA on DCW ($R^2$ = 0.9809) and yield of glucose on DCW ($R^2$ = 0.9421) were closely correlated with clump diameter. The optimum clump diameter range for higher IA production was 0.40-0.50 mm. (4) When the clump diameter was controlled at 0.45 mm by manipulating the mechanical stress in a 7 L fermentor, the yield of IA on DCW and yield of glucose on DCW were increased by 25.1% and 16.3%, respectively. The results presented in this study provide a potential approach for further enhancement of metabolite production by filamentous fungi.

• 한국경영과학회지
• /
• 제18권3호
• /
• pp.151-157
• /
• 1993

In this paper, we investigate the effects of yield randomness for lot-sizing in a multi-stage production system. The practical importance of incorporating yield randomness into production models has been emphasized by many researchers. Yield randomness, especially in semiconductor manufacturing, poses a mojor challenge for production planning and control. The task becomes even more difficult if the demand for final product is uncertain. An attempt to meet the demand with a higher level of confidence forces one to release more input in the fabrication line. This leads to excessive work-in-process (WIP) inventories which cause jobs to spend unpredictably longer time waiting for the machines. The result is that it is more difficult to meet demand with exceptionally long cycle time and puts further pressure to increase the safety stocks. Due to this spiral effect, it is common to find that the capital tied in inventory is the msot significant factor undermining profitability. We propose a policy to determine the quantity to be processed at each stage of a multi-stage production system in which the yield at each stage may be random and may need rework.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권4호
• /
• pp.466-469
• /
• 2002

The data on 512 Hariana cows, progeny of 20 sires calved during period from 1974 to 1993 maintained at Government Livestock Farm, Hisar were considered for the estimation of genetic parameters. The means for first lactation milk yield (FLY), wet average (WA), first lactation peak yield (FPY), first lactation milk yield per day of first calving interval (MCI) and first lactation milk yield per day of age at second calving (MSC) were 1,141.58 kg, 4.19 kg/day, 6.24 kg/day, 2.38 kg/day and 0.601 kg/day, respectively. The effect of period of calving was significant (p<0.05) on WA, FPY and MCI while the effect of season of calving was significant only on WA. Monsoon calvers excelled in performance for all the production efficiency traits. The effect of age at first calving (linear) was significant on all the traits except on MCI. Estimates of heritabilty for all the traits were moderate and ranged from 0.255 to 0.333 except for WA (0.161). All the genetic and phenotypic correlations among different production efficiency traits were high and positive. It may be inferred that selection on the basis of peak yield will be more effective as the trait is expressed early in life and had reasonably moderate estimate of heritability.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.354-354
• /
• 2017

Rice grain yield is determined by crop dry matter production that is sensitive to temperature. Our objective was to determine whether the difference in temperature between years had an impact on the relationship between yield components and grain yield. Field experiments were conducted under machine transplanting cultivation by using yield data of two japonica rice varieties, Odaebyeo (early maturing) and Nampyeong (mid-late maturing), in 2013 to 2016 in Suwon, Korea. Plant height, dry weight, and yield components were examined by analysis of variance, correlation. The milled rice yield of the two varieties were the highest in 2016, however the lowest yields were observed in the different years. In 2016, Odaebyeo produced $0.96t\;ha^{-1}$ greater milled rice yield than in 2015, and Nampyeong produced $1.11t\;ha^{-1}$ greater yield than in 2013. The correlation analysis indicated that spikelet per panicle (R = 0.53) was associated with grain yield of Odaebyeo. In Nampyeong, biomass at heading date (R = 0.74), 1000-grain weight (R = 0.71), spikelet per panicle (R = 0.58), and panicle number per $m^2$ were associated with grain yield. Sink size (spikelet number per $m^2$) of the two varieties responded to accumulative temperature from transplanting to panicle initiation stage. In this experiment, optimal accumulative temperature before panicle initiation has effect on increased spikelet number and/or number of panicle that were mainly responsible for yield difference. Rice production research to increase grain yield should consider all yield components, but increased emphasis on biomass production before heading is also necessary as well as grain ripening conditions.

• KSBB Journal
• /
• 제13권3호
• /
• pp.284-288
• /
• 1998

Production of inulo-oligosaccharides from inulin was carried out with the maximum yield of 94% using a purified endoinulinase from Aspergillus ficcum. The optimum reaction temperature and pH were 55-60$^{\circ}C$ and pH 5.5-6.0, respectively. The Michaelis constant and maximum reaction velocity of the endoinuinase for inulin were 13.27 g/L and 0.13 g/L$.$min at 55$^{\circ}C$, pH 5.5, respectively. Inulin source had no significant effect on oligosaccharide yield and product composition, although initial production rate differed according to inulin origins. The reaction pH was a critical factor in inulo-oligosaccharide production because considerable free monosaccharides were released, decreasing oligosaccharide yield at low pH conditions. An empirical relationship describing the reaction performance was developed from kinetic data: the time to reach maximum oligosaccharide yield (tw) as a function of initial concentration of inulin (lo) and enzyme (Eo); i.e., log tM = -1.025 log Eo - 0.011 l0 + 2.655.

• 대한산업공학회지
• /
• 제40권5호
• /
• pp.477-480
• /
• 2014

The single-period production inventory control problem under random yield is considered to analyze the impact of the yield characteristics on the firm's profit. We use the stochastic comparison as a main vehicle to compare the profits resulted under different random yields. Commonly used stochastic orderings are addressed with an analysis of their implications on the firm's profit. Moreover, a distribution-free bound on the profit is derived.

• Journal of Plant Biotechnology
• /
• 제2권3호
• /
• pp.157-163
• /
• 2000

Optimization of chemicals in the large scale sea water medium and inoculum for biomass and natural colourants production in the marine cyanobacteria, Phomidium tenue BDU 46241 (phycoerythrin producer) and P.valderianum BDU 30501 (phycocyanin producer) was carried out by experiments in L8 orthogonal array. Mathematical analysis revealed the significance of these factors. The factor(s) that critically control the yield varied with the organism and the end-product further, the desirable level of these factors between the normal and a higher level tested was identified and improved media were evolved. In both cyanobacteria, higher level of $K_2$$HPO_4$, $NaNO_3$ and inoculum with normal level of ferric ammonium citrate was found to be desirable for biomass production and additionally, higher level of $MgSO_4$ for pigment production. The level of other factors varied with the organism and the end-product. Confirmation experiments showed that the clues obtained based on mathematical experimentation are valid. In P.tenue, the medium optimized for biomass production increased the yield of biomass by 495% and the medium optimized for phycoerythrin production increased the yield of biomass by 408% with 30% increase in phycoerythrin content of the biomass. Similarly in P.valderianum, the medium optimized for biomass production increased the yield of biomass by 224% and the medium optimized for phycocyanin production increased the yield of biomass by 143% with 44% increase in phycocyanin content of the biomass.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권6호
• /
• pp.737-741
• /
• 1996

Dry matter yield of reed canarygrass was investigated in uncultivated rice paddy in Korea, and an attempt was made to estimate the most economic and efficient cutting frequency and rates of nitrogen (N) fertilization, for increased production of reed canarygrass. Total dry matter yields of reed canarygrass per year were 7.4-15.7, 8.5-16.1, and 7.5-13.4 tons/ha in 3, 4, and 5 cutting frequencies, respectively, and over the N treatments of 0-120 kg N/ha/cut. When cut 3 or 5 times annually, the 2nd cut produced the highest proportion of total yield at 38.4 and 33.0%, respectively, when cut 4 times the 3rd cut was highest (38.3%). The ranges of economic N level, limiting N level and efficiency of dry matter production were 243.3-293.0, 387.2, and 14.6 kg DM/kg N, respectively. These indicators were particularly low for the 5 cutting frequency possibly because of the unusually high temperature in the summer season. The best cutting frequency for the dry matter production of reed canarygrass in 1994 was 3 per year because of the higher efficiency of dry matter production.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.590-596
• /
• 1999

The effect of evaporative cooling in alleviating seasonal variations of dairy cows raised in AlMarai Dairy Farms in the Kingdom of Saudi Arabia were studied using milking record collected during the period of 1991 to 1996. The data included 13303 and 8137 records represented winter and summer calving seasons. Evaporative cooling system improved production for cows calved in summer. The least square means of milk yield were 9631 and 9556 liter for cows calved in winter and summer seasons but no significant differences (p<0.05) were observed between the yield of two seasons. No significant effect of season on calving under evaporative cooling on most of the biweekly points of the lactation curve. The farm, parity and milk level showed a significant effect on the shape of the curve. Functions of the lactation curve like initial yield, 305 MY, peak yield, time of peak and duration were estimated for each phase of the lactation curve.