• 산업경영시스템학회지
• /
• 제9권13호
• /
• pp.1-11
• /
• 1986

The mechanization of production facilities being made rapid progress, and its function being diversified and complicated for industrialized period, the relation between machine and Its operator brings about many problems which are concerned with accident. In these circumstance, the purpose of industrial safety can not be properly achieved as considered by only one side of machine or man. Therefore, it is necessary to study how to cope with the safety of man-machine system. It has to be considered in the above mentioned contents that safety management can not be attained through only technique of numerical control. The cause of accident being studied scientifically, the service of safety problems has to be systematized and operated in rational safety organization. The purpose of this thesis is to consider preventing and decreasing industrial accident from production system field by means of the improvement of worker's own safety consciousness and introducing the function of safety management to the duties of labour union.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.140-145
• /
• 2005

The PL(Product Liability) Law has been going into effect in Korea since July 2002. Accordingly, a company's responsibility for customers who are damaged by the defect in the product safety has been gradually strict and imposed burden on management. Not only general consumers but also labors who work with machine in the field of production are included in the concept of victim of the PL Law. That is to say, when a worker is damaged by the defect of machine he can institute a PL lawsuit more aggressively, not just get the industrial accident compensation as usual, only if not his own fault but the defect of machine used in the course of production can be demonstrated. This paper intends to present suggestions to PL prevention of manufacturing companies of industrial machine through the case research of PL accidents in the area of industrial safety.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.29-33
• /
• 2017

This paper presents a development of vision aligner with three channels for the wafer and plate bonding machine in manufacturing of LED. The developed vision aligner consists of three cameras and performs wafer alignment of rotation and translation, flipped wafer detection, and UV Tape detection on the target wafer and plate. Normally the process step of wafer bonding is not defined by standards in semiconductor's manufacturing which steps are used depends on the wafer types so, a lot of processing steps has many unexpected problems by the workers and environment of manufacturing such as the above mentioned. For the mass production, the machine operation related to production time and worker's safety so the operation process should be operated at one time with considering of unexpected problem. The developed system solved the 4 kinds of unexpected problems and it will apply on the massproduction environment.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.225-230
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.41-56
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.

• 산업공학
• /
• 제5권1호
• /
• pp.35-46
• /
• 1992

This paper deals with analysis of material handling system efficiency of a heat-exchanger manufacturing line. This line is a typical flow shop type assembly line which consists of 10 steps of assembly stations. Each station have one or two workers who assemble and move components for the job, and no special transporters for component's movement. Therfore, all the workers are involoved in unnecessary moving activities which decrease overall production efficiencies of the line. To improve productivities, production outputs and worker's job performances for this assembly line, the several alternatives are considered such as installing new conveyor lines and automatic guided vehicle(AGV) system. Analyzing economic feasibilities and responses of the system alternatives, an experimental simulation model is built suing SIMAN Ver. 3. 5 simulation language with CINEMA package for animation of the process flow. Through this animation process a vivid picturial analysis could performed on the process flow.

• 대한산업공학회지
• /
• 제42권2호
• /
• pp.80-85
• /
• 2016

This study suggests a process design using cognitive processes. Job characteristic model for job design and recent cognitive engineering studies for process design are reviewed briefly. By using these concepts, the lean production system is re-interpreted in terms of cognitive engineering and the latent dimensions of the lean production system are revealed as the application of cognitive engineering principles. An integrated process design framework for cognitive manufacturing system using job characteristic model is suggested for the effective design of manufacturing system. Propositions for empirical analysis of this model are also analyzed through a questionnaire survey. Propositions are (1) experiential cognition and motivation potential affect the ability, role perception, and need for achievement of the operator in the manufacturing system, (2) the ability, role perception, and need for achievement of the operator affect the job performance. Both propositions are supported by correlation analysis and path analysis.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.57-64
• /
• 2021

The domestic semiconductor industry can produce various products that will satisfy customer needs by diversifying assembly parts and increasing compatibility between them. It is necessary to improve the production line as a method to reduce the work-in-process inventory (WIP) in the assembly line, the idle time of the worker, and the idle time of the process. The improvement of the production line is to balance the capabilities of each process as a whole, and to determine the timing of product input or the order of the work process so that the time required between each process is balanced. The purpose of this study is to find the optimal WIP and buffer size through SA (Simulated Annealing) that minimizes lead time while matching the number of two parts in a parallel assembly line with bottleneck process. The WIP level and buffer size obtained by the SA algorithm were applied to the CONWIP and DBR systems, which are the existing production systems, and the simulation was performed by applying them to the new hybrid production system. Here, the Hybrid method is a combination of CONWIP and DBR methods, and it is a production system created by setting new rules. As a result of the Simulation, the result values were derived based on three criteria: lead time, production volume, and work-in-process inventory. Finally, the effect of the hybrid production method was verified through comparative analysis of the result values.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.113-119
• /
• 2013

뿌리기술로 불리는 생산기반기술은 국내 주력기간산업과 미래유망산업 관련 제품의 품질 및 생산성을 좌우하는 핵심기술로서 제조산업의 주류를 이루는 중소기업의 경쟁력 강화를 위한 최적의 생산기반기술 관련 지식의 공유 및 확산은 매우 중요하다. 그러나, 생산기반기술은 현장 경험과 숙련 정도에 의존도가 높은 공정기술이기 때문에 이를 지식의 형태로 표준화하여 시스템적으로 공유하기 어렵다. 본 연구에서는 대표적인 모바일 핵심부품 중 하나인 휴대폰 외장부품 제조를 위해 공통적으로 필요한 부품 설계, 금형설계, 금형가공, 사출성형공정 최적화, 표면처리 등의 주요 기반기술의 표준화 및 정보화를 수행하였다. 또한, 이를 쉽게 축적, 공유하도록 하기 위하여 지식저작도구, 의미기반 데이터베이스, 웹 포털 서비스로 구성된 웹 기반 지식공유 시스템을 구축하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제12권2호
• /
• pp.69-73
• /
• 2006

To elucidate the composition of bumblebee (Bomb us terrestris) venom (BBV) and the anti-inflammatory effect of BBV. The major components of BBV by LC chromatography and SDS-PAGE were identified. The production of nitric oxide (NO) and proinflammatory cytokines was examined by lipopolysaccharide (LPS) in a macrophage cell line, RAW 264.7 cells, with BBV. BBV inhibits LPS-induced NO in a dose dependent manner. We also found that BBV inhibits proinflammatory cytokine, tumor necrosis factor (TNF)-${\alpha}$ and interleukin (IL)-6 production. These findings mean that BBV can be used in controlling macrophages mediated inflammation related disease. Additional studies on the pharmacological aspects of the individual components of BBV are recommended for future trials.