• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.52-59
• /
• 2013

The internal contamination screening method using gross beta measurement was performed for radioisotope workers. 24 h and spot urine samples from workers of medical isotope production facilities were collected and measured. Most of the results were similar with the background level of gross beta activity except for a specific worker. Gross beta activity was slightly increased in several hours after finishing work. And the environmental factor of production facilities causing internal contamination were estimated based on screening results. The additional detailed internal dose assessment must be followed after the screening for protection of workers. Moreover, a procedure was established to apply a simple internal contamination assessment for radiation workers.

• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.568-574
• /
• 1995

To investigate the effect of pH on organic acid production by Anaerobiospirillum succiniciproducens, an anaerobic fermentation was carried out by maintaining the pH of the fermentation broth at 5.8, 6.0, 6.4, 6.8, and 7.2. At various pHs, the concentrations of cell were $1.0∼1.9g/\ell$ which were two to three times higher than those of the other worker's results, and the maximum was obtained at pH 5.8. Substrate consumption was increased by increasing the pH in the range of pH 6.0 to 6.8, while the sugar consumption rate at both pH 5.8 and 7.2 was very slow. The total amount of 2M $Na_2C0_3$ added for adjustment of pH change due to organic acid production was maximum at pH 6.8. Changes of conductivity of the fermentation broth was very simillar to those of 2M $Na_2C0_3$ added at various pHs. Therefore, it is suggested that determination of the amount of organic acid in a broth can be possible by measuring the conductivity. The maximum production yield of lactate based on glucose was 64% for pH 7.2 and 32% for pH 6.8, respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.1 s.49
• /
• pp.225-243
• /
• 1995

Benzidine Industry in Korea has started after Japan has banned its production in early 1970's, and it has been in operation in Korea for over 20 years. However, it is not known yet whether any bladder cancer has developed from benzidine exposure. This study was done to screen benzidine-exposed workers for bladder cancer, and to examine the feasibility of employing screening test at the workplace. All the workplaces that manufacture or use benzidine for more than 20 years in Korea have been covered in this study, and they include 2 benzidine manufacturing factories, 5 benzidine using factories, as well as 2 benzidine free factories as an outside control. In total, 516 workers were screened with urine stick test and urine cytology test for the evidence of hematuria and abnormal urothelial cells. Each worker was also asked about risk factors and symptoms of bladder cancer including past medical history, smoking, medication and occupational history Benzidine in the air was measured by personal and area sampling. Out of 516 screened workers, 84(16.3%) workers showed positive hematuria in urine stick test, and 7(1.4%) workers showed degenerative cells in urine cytology tests. Those workers with abnormal urine test results who have been exposed to benzidine fo more than 10 years were further screened, and, in total, 23 workers were examined with intra-venous pyelography and cystoscopy. None of those screened had any evidence of bladder cancer When workers with only past hematuria history were included in the positive hematuria group, 96(18.5%) had positive hematuria. On the multiple logistic regression analysis, positive hematuria was significantly associated with benzidine exposure, history of other occupations with elevated bladder cancer risk, pyuria and glycosuria. The association got stronger as direct benzidine exposure was accounted through individual task analysis, and as exposure duration was accounted with tenure analysis. For those with benzidine exposure with more than 10 years of tenure, the odds of having positive hematuria was elevated 2.14(95%C.I is 1.08 to 4.25) times more than for those without exposure. Even though bladder cancer was not detected for several limitations including short observation period, majority of studied workers with short latency, healthy worker effect, and low sensitivity of single screening test in a cross-sectional study, the study results suggest that hematuria screening is a feasible and very useful test for bladder cancer screening among benzidine exposed workers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.28-36
• /
• 2022

Currently, the automation and intelligence of the shipbuilding industry have improved its work production capacity and cost competitiveness, but the reduction rate of safety accidents among industrial site workers is still low and the damage caused by safety accidents is very serious, so there is a need for improvement according to the workplace. This research aims to demonstrate the connectivity between smart safety helmets in the demonstration area to verify the effectiveness along with the development of smart helmets for worker protection and environmental safety in shipyards. For efficient communication between workers, impact noise of over 95dB was confirmed in the workplace, and noise reduction was required. To solve this problem, the filtering performance was compared and analyzed using the Butterworth, Chebyshev, and elliptic algorithms. The connectivity test and noise reduction method between smart helmets proposed in this study will increase the usability and safety of the field through the development of advanced smart helmets tailored to the shipbuilding workplace in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.85-91
• /
• 2001

Background : It goes without saying that cumulative trauma disorders is spreading to various types of occupation in many advanced countries including America, and it forms considerable rate of total occupational disorders already. and as the result of it, the seriousness of worker health problem and economic loss owing to production loss, recuperation expense, etc. are on the increasing trend through whole society. In case of Korea, the related measures as well as accurate fact-finding survey data on cumulative trauma disorders aren't prepared in detail, so it implies forward problem would be serious. Purpose : The purpose of this study is to draw the risk factor of cumulative trauma disorders in production factory, to forecast the rate of occurrence of cumulative trauma disorders on the basis of subjective symptoms, and to present forward realistic and effective prevention measures by showing the risk of cumulative trauma disorders, objecting the production factory of a domestic riding automobile assembly shop, by estimating in the aspect of human-engineering through the analysis of risk factor being a cause of cumulative trauma disorders. Methods : For this study, I investigated work type and on-duty hours, breathing time, and subjective symptoms of cumulative trauma disorders through questionnaire, objecting the workers in press. car body, coating, and outfit factory. Results : As a result of research, 81.2% of workers were in the physical burden due to present working, and the highest prevalence by part of body is an waist. The higher a rule score, The higher the number of workers complaind for working intensity, and the higher age work duration, tool used time, the higher prevalence of subjective symptoms by part of body. The number of workers complaind subjective symptom for treatment is the highest in drugstore.

• Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.136-143
• /
• 2022

Background: In northern Thailand, the longan flower is the principal nectar source for honey production. Microorganisms play a critical function in the agricultural ecology. The morphological characteristics of fungal species found in longan pollen were studied. Aspergillus spp. were found to be invertase-producing strains and were employed in the longan syrup production process. The purpose of this study was to evaluate the effects of invertase-added longan syrup on the adult honey bee population numbers that were fed by this syrup for 16 weeks. Results: Different fungal species were found in longan pollen samples. Aspergillus was the main genus, with three predominant sections: Nigri, Flavi, and Terrei. Other isolated species were Trichoderma spp., Rhizopus spp., Neurospora spp., Chaetomium spp., Fusarium spp. and Penicillium spp. However, Aspergillus spp. is the only fungal species that produces the enzyme invertase. The invertase-producing strains belonging to the Aspergillus section Nigri were found to be A. niger LP5 with an optimum activity at pH 6.0 and 60℃. When A. niger LP5 invertase was used for longan syrup processing, the highest levels of glucose (3.45%) and fructose (2.08%) were found in invertase added longan syrup (C), while fresh (A) and boiled longan syrup (B) had lower contents of both sugars. The sucrose content was detected in (A) at 4.25%, while (B) and (C) were at 4.02% and 3.08%, respectively. An appropriate amount of sugar to feed and maintain the honey bee population was considered. The data showed no statistically significant differences between the two selected forms of longan syrup compared to the sugar syrup examined by the adult honey bee population. Conclusions: The main species of isolated fungi from longan pollen were Aspergillus spp. The discovery of an invertase-producing strain of A. niger LP5 has enabled its application for enzyme utilization in the invert sugar preparation process. The adult worker bee populations fed by longan syrup from both boiled and invertase-added sources showed an increasing trend. Artificial syrup made from longan fruit to feed honey bees when natural food sources are limited can be applied.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.41-44
• /
• 2010

Purpose: Along with recent advances in PET/CT instrumentation and imaging technology, the number of patients has also been steadily increasing. This resulted in the increased radiation exposure to radiation workers in PET/CT rooms. In this study, we installed a radiation shield and investigated whether it could reduce radiation exposure to the workers and thus enhance job satisfaction. Materials and Methods: A radiation shield is composed of 5 cm thick lead and has a structure in which a radiation worker sits and watches a patient through lead glass while injecting radiopharmaceutical to the patient. Quarterly absorbed dose of radiation workers was measured using thermoluminescence dosimeters (TLD) and the results were compared for six months each before and after installation of the radiation shield. Exposure dose was also measured using a pocket dosimeter placed at the same location in the front and the back of the radiation shield. In addition, frequency of use of the shield and job satisfaction of radiation workers were investigated using a survey. Results: Quarterly absorbed dose of radiation workers was 2.70 mSv on average before installation of new radiation shield, whereas that dropped to 2.13 mSv after installation of radiation shield, reducing radiation exposure dose by 21%. Exposure dose on the front side of the shield was 61.2 R, whereas that on the back side of shield was 2.8 R. According to the survey, 85% of workers used the shield and were satisfied with the outcome: each radiation worker made injections to patients average of 6.5 times/day and preferred sitting to standing while injecting radiopharmaceutical to patients. Conclusion: Use of radiation shield reduced the exposure dose of radiation workers, which is the ultimate goal of radiation protection to minimize radiation exposure and is an appropriate method for the improvement of hospital working environment. Furthermore, we found that use of radiation shield not only relieves physical and psychological burden of radiation workers but also enhances job satisfaction. This result indicates that use of radiation shield is important for improvement of the radiation workers' job environment in terms of radiation protection.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2005

Purpose : Heavy metal use when producing the block from the workshop. At this time, production of heavy metal dust and fume gives risk in human. This like heavy metal to improve seriousness through measurement and analysis. And by the quest in solution is purpose of this thesis. Materials and Methods : Organization is Inductively Coupled Plasma Atomic Emission Spectrometer, and the object is Deajeon city 4 workshops in university hospital radiation oncology (Bismuth, Lead, Tin and cadmium). Method is the ppb the pumping it does at unit, comparison analysis. And the Calculation heavy metal standard level in air through heavy metal standard level in body and blood, so Heavy metal temporary standard set. Results : Subterranean existence room air quality the administration laws appointed Lead and Cadmium's exposure recommend that it is $3{\mu}g/m^3\;and\;2{\mu}g/m^3$. And Bismuth and Tin decides $7{\mu}g/m^3\;and\;6{\mu}g/m^3$ through standard level in air heavy metal and standard level in body and blood. Heavy metal measurement level of workshops in 4 university hospital Daejeon city compares with work existence and nonexistence. On work nonexistence almost measurement level is below the recommend level. But work existence case express high level. Also consequently in composition ratio of the block is continuous with the detection ratio. Conclusion : Worker's heavy metal contamination imbrued serious for solution founds basic part. In hospital may operation on local air exhauster and periodical efficiency check, protector offer, et al. And worker have a correct understanding part of heavy metal contamination, and have continuous interest, health control. Finally, learned society sphere administer to establishment standard level and periodical measurement. And it founds basic solution plan of periodical special health checkup.