• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.440-449
• /
• 1994

Current risk assessment practices largely reflect the need for a consistent set of relatively rapid, first-cut procedures to assess 'plausible upper limits' of various risks. These practices have important roles to play in 1) screening candidate hazards for initial attention and 2) directing attention to cases where moderate-cost measures to control exposures are likely to be warranted, in the absence of further extensive (and expensive) data gathering and analysis. A problem with the current practices, however, is that they have led assessors to do a generally poor job of analyzing and expressing uncertainties, fostering 'One-Number Disease' (in which everything from one's social policy position on risk acceptance to one's technical judgment on the likelihood of different cancer dose-response relationships is rolled into a single quantity). At least for analyses that involve relatively important decisions for society (both relatively large potential health risks and relatively large potential economic costs or other disruptions), we can and should at least go one further step - and that is to assess and convey both a central tendency estimate of exposure and risk as well as our more conventional 'conservative' upper-confidence-limit values. To accomplish this, more sophisticated efforts are needed to appropriately represent the likely effects of various sources of uncertainty along the casual chain from the release of toxicants to the production of adverse effects. When the effects of individual sources of uncertainty are assessed (and any important interactions included), Monte Carlo simulation procedures can be used to produce an overall analysis of uncertainties and to highlight areas where uncertainties might be appreciably reduced by further study. Beyond the information yielded by such analyses for decision-making in a few important cases, the value of doing several exemplary risk assessments in. this way is that a set of benchmarks can be defined that will help calibrate the assumptions used in the larger number of risk assessments that must be done by 'default' procedures.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.114-122
• /
• 2002

Earned Value Management System(EVMS) is a management technique that is emerging as a valuable tool in the management of all projects, including and in particular construction projects. It is based on C/SCSC that has been released by the U.S. Department of Defense (DOD) in 1967. In a project that employs the earned value management concept, the project's measurable performance plans will be formed with the creation of CAPs. The formation of CAPs is a planning step necessary to form an earned value baseline. In this paper, a method is proposed to form CAPs using Material Requirement Planning(MRP) that is also known as a useful planning tool in the manufacturing industry. An application to a real project has been carried through workpackaging model.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.3
• /
• pp.217-240
• /
• 2017

The purpose of this study was to investigate the semantic network analysis to understand image contents and to examine the degree to which words, word clusters contributed to the formation of semantic map within image contents. For this research, from 1993 until 2016 the field of the image contents were collected for a total of 2,624 cases papers. The word appeared in Title analyzed the social network by using the R program of Big Data. The results were as follows: First, The field of image contents is based on researches related to 'image', 'media' and 'contents'. Second, there is a three-step flow ('education' -> 'media' -> 'contents') of research in the field of image contents. Third, researches related to 'broadcasting', 'digital', 'technology', and 'production' were continuously carried out. Finally, There were new research subjects for each regime.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.867-873
• /
• 1998

Laboratory study was conducted to provide basic data for operating anaerobic sequencing batch reactor(ASBR) process for treatment of nightsoil. The experiments were concerned with digestion characteristics, settleabiltity and dewaterability of digested sludge in ASBR system. Completely-mixed dally-fed control reactor without solid-liquid separation step was also operated to evaluate the baseline performance since the nature of nightsoil was changed with time. In all case, gas production from the ASBR shows 1.3 to 1.44 times higher than that from control, in spite of almost similar trend in organics removal. During thickening period, remarkable decrease in surface settling velocity was observed at the ASBRs compared with the control. In case of the ASBR run, flotation of mixed digested sludge was not occurred. Also, ultimate thickened volume of ASBRs increased 1.2~1.5 times compared with control. Dewaterability of digested sludge without conditioning decreased when the completely-mixed daily-fed reactor for ASBR run was converted to the ASBR. However, improvement of dewaterability of digested sludge from the ASBRs was observed as a result of addition of FeCl$_3$ to digested sludge for conditioning.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.1 no.1 s.1
• /
• pp.65-78
• /
• 2003

This research is to provide practical help in learning hair and makeup illustration skills by presenting techniques for hair and makeup drawing; to serve efficient illustration education; and to enhance the status of beauty and contribute to artistic development. Hair style and makeup techniques include graphical one, pattern-centered one, one using pattern paper, simplifying one and mood one expressing image. Of them, this research made the illustrations to use cosmetics, color pencils and pastel based on the graphical technique. for each design of the illustrations, ethnic, sexy, natural, romantic and gorgeous images, which were considered to be appropriate to the graphical technique, were chosen by the researcher out of hair and makeup styles that appeared in the fashion magazines including Vogue, Gap, Mode et Mode from 2000 through 2001. In particular, they were chosen with focusing on basic styles. The summaries below were found with the experience of making illustrations. Various techniques and skills are required to express the ideas of hair and makeup styles. Of them, the graphical technique is very useful as the primary step to learn various techniques and improve drawing skills. First, the graphical technique may enable not only expressing what is desired to draw as is, but also accurately representing hair and makeup designs so as to convey objective expression. In this regard, it is a proper way to achieve its inherent purpose as conveyance of messages. Second, more accurate styling of hair and makeup is available through graphical expression, which helps understand related practical techniques. In addition, makeup illustration, which is expressed through direct makeup products and instruments, may serve skill improvement since such direct use provides the feeling of real makeup. Third, the graphical technique as a basic drawing skill may unrestrictedly show the artist's expression ability. Fourth, although artistic merits implying individuality and creativity should be shared through illustrations that express the artist's ideas or emotions, the graphical technique is the easiest method to beginners who just started learning of illustration, in that it enables expression without highly advanced skills.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.217-223
• /
• 2019

The application of 3D printing technology is expanding due to the production of the complex-shape parts and the one-step manufacturing process. Moreover, various technical solutions in 3D printing are emerging through continuous research and development. Representative technologies include SLS technology, in which a desired area is sintered and laminated by irradiating a powder-type material with a laser. In addition, high-performance engineering plastic parts are being manufactured in increasing numbers. In this study, tensile specimens were fabricated from polyamide 12, a widely available polymer, and the glass bead-reinforced polyamide 12. The specimen-build orientation was divided into 0°, 45°, and 90° on the fabrication platform, and the tensile test temperature was -25℃, 25℃, and 60℃. The test results showed that the tensile modulus of both materials decreases as the build orientation becomes closer to 90°. In addition, the tensile strength of glass bead-reinforced PA12 showed more dependence on the build orientation than PA12. In addition, the tensile modulus and tensile strength decreased with increasing test temperature.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.181-191
• /
• 2014

Modern commercial greenhouse requires the use of advanced climate control system to improve crop production and to reduce energy consumption. As an alternative to classical sensor-based control method, this paper introduces a model-based control method that consists of two models: the predictive model and the evaluation model. As a first step, this paper presents straightforward models to predict the effect of natural ventilation in a greenhouse according to meteorological factors, such as outdoor air temperature, soil temperature, solar radiation and mean wind speed, and structural factor, opening rate of roof ventilators. A multiple regression analysis was conducted to develop the predictive models on the basis of data obtained by computational fluid dynamics (CFD) simulations. The output of the models are air temperature drops due to ventilation at 9 sub-volumes in the greenhouse and individual volumetric ventilation rate through 6 roof ventilators, and showed a good agreement with the CFD-computed results. The resulting predictive models have an advantage of ensuring quick and reasonable predictions and thereby can be used as a part of a real-time model-based control system for a naturally ventilated greenhouse to predict the implications of alternative control operation.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.11a
• /
• pp.285-334
• /
• 2008

The manager of manufacturing industry just not to have known to do related to the law of Product Liability that was put into operation in July 2002. The law of PL is a public law about defective product, which was established in order to compensate consumer's damages of property and body caused by product, to make sound society by the safety products and to take international competitiveness. The economic effects by the law of Product Liability are the increase of consumers relief production cost by the lawsuits. Product liability as a process has developed significantly in the United Kingdom and the United States of America. The rapid introduction of product liability has recently been a prevalent phenomenon, as global changes arising from rapid development in science and the economy have resulted in a highly interconnected world economy. This thesis was established, based on current literature and business consulting cases in the position of companies, and is one of the operating subjects in a system for legal responsibility in manufactured products. However, there are limitations in the fact that research theories are only able to present a theoretical model and directions. In this context, managers and personnel of multiple companies cannot adequately respond to the recently enforced Product Liability Act. The major findings are summarized as Product Liability Management Activity are positively Correlation of Enterprise Value.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.197-203
• /
• 2001

Micro-defects induced by design and production failure or working environments are known as the cause of SCC(Stress Corrosion Cracking) in aged structures. Therefore, the evaluation of structural integrity based on micro-cracks is required not only a manufacturing step but also in-service term. So we introduce a new nondestructive inspection method using the magneto-optical film to detect micro-cracks. The method has some advantage such as high testing speed, real time data acquistion and the possibility of remote sensing by using of a magneto-optical film that takes advantage of the change of magnetic domains and domain walls. This paper introduces the concept of the new nondestructive inspection method using the magneto-optical film, also proves the possibility of this method as a remote testing system under oscillating load considering application on real fields by applying the method to four types of specimens.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.314-319
• /
• 2008

Penicillin G amidase (PGA, benzylpenicillinaminohydrolase, EC 3.5.1.11) is industrially important enzyme which converts penicillin G to 6-aminopenicillanic acid (6-APA) and phenylacetic acid (PAA). The PGA in E. coli ATCC 11105 is secreted into the periplasm after removing signal sequences and becomes heterodimer which composed of two subunits, small subunit (24 kDa) and large subunit (65 kDa). In this study, the PGA gene was obtained from E. coli ATCC 11105 using PCR (polymerase chain reaction) technique. The active PGA was successfully secreated into periplasm in E. coli BL2 1(DE3) harboring pET-pga plasmid. The optimized fed-batch fermentation, consisting of a three-step shift of culture temperature from $37^{\circ}C$ to $22^{\circ}C$, gave a productivity of 19.6 U/mL with a cell growth of 62 O.D. at 600 nm.