• 한국해양학회지:바다
• /
• 제15권3호
• /
• pp.124-132
• /
• 2010

해양 식물플랑크톤 일차생산력의 전 지구적 중요성에도 불구하고 자료 처리상의 어려움 때문에 국내에서는 신뢰할만한 자료가 많지 않다. 식물플랑크톤 일차생산력은 시간-수심 적분 과정을 거쳐 최종적으로 단위 면적당 하루 일차생산력을 구하지만, 시간 적분에 대한 연구결과는 많지 않은 편이다. 본 연구에서는 단위 시간당 일차생산력을 시간 적분하여 하루 일차생산력을 계산하는 수학적 모델을 제시하고 새만금호를 대상으로 모델의 실효성을 검정해 보았다. 검정 결과, 시간 적분 모델이 일사량 실측치를 대입하여 합산한 결과와 잘 일치하였다. 일차생산력 계산을 위한 기초 광량 자료는 변화가 심한 일 자료보다 한 달 또는 한 주간 평균 자료를 대입하는 것이 더 신뢰성 있는 결과에 도움이 되는 것으로 판단되었다. 일차생산력 수직적분은 수직적으로 불균일한 식물플랑크톤 분포 때문에 어려움이 있으나, 엽록소 분포를 몇 가지 유형으로 분류하여 수식화한 다음, 각 수식을 시간 적분한 일차생산력 모델과 합성하여 적분하면 해결할 수 있을 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.391-399
• /
• 2005

This paper deals with the survey of domestic hydrogen production, consumption, and distribution. The amount of domestic hydrogen production and consumption has not been identified, and we survey the amount of domestic hydrogen production and consumption by industries. The hydrogen production industries are classified into the oil industry, the petrochemical industry, the chemical industry, and the other industry. In 2004, the amount of domestic hydrogen production was 972,601 ton, which corresponded to 1.9% of the global hydrogen production. The oil industry produced 635,683 ton(65.4%), the petrochemical industry produced 241,970 ton(24.9%), the chemical industry produced 66,250 ton(6.8%), the other industry produced 28,698 ton(2.9%). The hydrogen consumptions of corresponding industries were close to the hydrogen productions of industries except that of the other industry. Most hydrogen was used as non-energy for raw materials and hydrogen additions to the process. Only 122,743 ton(12.6%) of domestic hydrogen was used as energy for heating boilers. In 2004, 47,948 ton of domestic hydrogen was distributed. The market shares of pipeline, tube trailers and cylinders were 84.4% and 15.6%, respectively. The purity of 31,848 ton(66.4%) of the distributed hydrogen was 99.99%, and 16,100 ton(33.6%) was greater than or equal to 99.999%. Besides domestic hydrogen, we also identify the byproduct gases which contain hydrogen. The iron industry produces COG( coke oven gas), BFG(blast furnace gas), and LDG(Lintz Donawitz converter gas) that contain hydrogen. In 2004, byproduct gases of the iron industry contained 355,000 ton of hydrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1180-1190
• /
• 2020

Objective: To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated. Methods: Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR). Results: Compared with the control, BSDF addition into meat batters showed a significant reduction in L^*-value and a significant increase in b^*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G') and loss modulus (G") values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water. Conclusion: BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.

• 한국의류학회지
• /
• 제13권4호
• /
• pp.330-338
• /
• 1989

The Korean apparel manufacturing industry started to meet domestic demands which had depended on importation in 1950s, growing into one of the export-oriented industries with several Five-Year Economic Development Plans. In spite of the development, inefficient organization of distribution of apparel manufacturing industry which connects production with consumption impedes further development of the industry. This study aims at suggesting desirable distribution system of ladies' apparel, the core of the fashion industry. This researcher interviewed those who are concerned in twenty-eight ladies' apparel manufacturing compaines, analyzing the current state of distribution in the industry and the problems. The results are as follows; 1. Forty-five percent of ladies' apparel is distributed through department stores. Therefore, the department stores need to assume their roles in sales and try to improve the condition and to train professional buyers. 2. The sales network is concentrated on the five biggest cities such as Seoul, Pusan, Taegu, Taechon, and Kwangju, prompting the need to be diversified. 3, Tke existing distribution forms distribution systems have many irrational factors which are aggravnting the rate of goods in stock. 4. The manufacturing companies do not implement studies on distribution. The companies should try to establish clear concepts on production and distribution on their own for better planning skills. 5. Computerized systems need to manage the procedures ranging from ordering, distribution, sales to inventory.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.22-25
• /
• 2002

The Mass production of ceramic heater has encountered with the estimation for the proper parameters of the printing conditions. This paper presents a method to estimate the squeegee pressure. It uses resistance distribution from the trial run with approximate squeegee pressure which comes from statistical process control (SPC). Then, the resistance distribution and its total resistance are input to the backpropagation neural networks that can recognize resistance's distribution patterns. The value of output network derived from the input value can identify to the appropriate squeegee pressure. The experimental results are demonstrated In ensure the efficiency and the reliability of this method with the accuracy 96.75 percent. Indeed, embedded on this method will aid us to reduce the loss from the normal mass production.

• 한국유통학회지:유통연구
• /
• 제2권1호
• /
• pp.59-85
• /
• 1997

The automobile industry in Korea has grown to the fifth in the world in terms of production capacity. In spite of the production growth, the marketing aspects such as distribution and customer service in the auto industry are still behind the world-class. Thus, the major purposes of this paper are as follows. The first is to analyze competitive structure of the industry and to compare distribution strategies of the major auto firms(Hyundai, Daewoo, and Kia). The second is to theoretically explain the transition from the vertical marketing system to the dealer system using transaction cost analysis. The third is to compare auto distribution channels in Korea with those in the U.S. and Japan. Finally, an optimal channel stucture in the auto industry is suggested after reviewing five alternative channel structures such as corporate-owned VMS, sales-specializing firm, multiplex system(VMS+limited dealer system), dual sales channel, and advanced dealer system. In the short-run, sales-specilizing firm was suggested as an optimal channel system to enhance customer satisfaction by integrating sales and customer service. In the long-run, advanced dealer system through regional differentiation was desirable for an optimal channel structure by organically integrating new car sales, used car sales, and after service to provide total marketing service to customers.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.531-539
• /
• 2009

The environment of automobile industry in the world is rapidly changing. It is changing of high oil price, technology, environment and construction of competition by newly rising an economic district. Automobile company is focusing on three issue because they want to reinforce competition of automobile industry in the world. That is innovation of production profit management through quality management and Lean. Chance of success is separated in R&D, providing distribution, manufacture, distribution, selling in automobile industry. Emphasis on development process, distribution process, manufacture process, circulation and selling process for strengthening the competitiveness and guarantee. In this thesis, we try to analysis the data set period of automobile production by using survival analysis. While using mean comparison of general statistics commit mistakes, survival analysis can used for including censored data in order to heighten analysis efficiency.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.355-365
• /
• 2013

Many manufacturing industries need more efficient organization since the customer expects a greater response to orders Due to this increased expectation, a supply chain management (SCM) has become one of the most important methods of competitive advantage in business today. This study has developed a simulator for the supply chain management problem. The simulator designed to help determine considering to the capacities and the costs of production and distribution facilities. The simulator developed using commercial simulation tool ARENA and the results of computational experiments for a simple example were given and discussed to validate the developed simulator. The simulator can be used to decide an realistic production-distribution planning in the area.

• 한국해양학회지
• /
• 제27권2호
• /
• pp.154-163
• /
• 1992

박테리아의 개체수와 생산량의 분포률, 그리고 하구 혼합 (estuarine mixing)이 이들 분포에 미치는 영향을 조사하기 위해, 1990년 10월부터 1991년 8월까지 만경강 및 동진강 하구의 유광대에서 박테리아의 개체수, 생산량, 수온 및 염분도를 3번 조사 하였다. 제한된 조사에도 불구하고 조사기간에 나타난 박테리아의 개체수와 생산량은 넓은 범위의 값을 보였다. 각각 0.4-5.8$\times$10/SUP 9/ 1/SUP -1/와 0.1-22.2 ug C /SUP -1/ d/SUP -1/이었다. 이는 박테리아의 성장이, 하구에서 매우 유동적임을 나타냈다. 흥미롭게도 박테리아의 개체수는 대부분의 수임이 얕은 정점의 표면 아래에서 증가하 였으나, 박테리아의 생산량은 뚜렷이 감소하였다. 이러한 현상은 하구 혼합에 의해서 설명될 수 있을 것으로 판단되며, mixing diagrams의 분석은 하구 혼합이 박테리아 개 체수와 생산량을 conservative하게 혼합하기도 하나, 박테리아 개체수를 증가시키며, 생산량을 감소시키는 작용을 하였으며를 보여주었다. 이것은 하구 혼합의 역할이 박테 리아의 개체수와 생산량의 분포에 따라서 하구에서의 생지화학적 순환에 있어서 중요 함을 제시하였다.

• 한국산림과학회지
• /
• 제76권4호
• /
• pp.390-396
• /
• 1987

지역삼림계획에 있어서 목재생산을 예측하는 모델을 작성하고 그 계산예를 제시하였다. 목재생산예측의 방법으로서 감은율법(減殷率法)이 이용되고 있다. 령목(鈴木)는 감마분포에 의해서 삼림의 수명을 결정하지만 본 예측 모델에서는 현재 삼림의 수명분포로서 적당하다고 생각되는 와이블분포나 감마분포 중 어느쪽을 사용해서라도 목재생산을 예측할 수 있도록 시스템화 하였다. 본 시스템을 분기별 수확량, 축적량, 노동량 등의 경영정보를 제공하게 되며 지역삼림계획 책정에 있어 유효한 수단으로 이용될 수 있을 것이다.