• BMB Reports
• /
• v.57 no.1
• /
• pp.60-65
• /
• 2024

The CRISPR-Cas9 system has significantly advanced regenerative medicine research by enabling genome editing in stem cells. Due to their desirable properties, mesenchymal stem cells (MSCs) have recently emerged as highly promising therapeutic agents, which properties include differentiation ability and cytokine production. While CRISPR-Cas9 technology is applied to develop MSC-based therapeutics, MSCs exhibit inefficient genome editing, and susceptibility to plasmid DNA. In this study, we compared and optimized plasmid DNA and RNP approaches for efficient genome engineering in MSCs. The RNP-mediated approach enabled genome editing with high indel frequency and low cytotoxicity in MSCs. By utilizing Cas9 RNPs, we successfully generated B2M-knockout MSCs, which reduced T-cell differentiation, and improved MSC survival. Furthermore, this approach enhanced the immunomodulatory effect of IFN-r priming. These findings indicate that the RNP-mediated engineering of MSC genomes can achieve high efficiency, and engineered MSCs offer potential as a promising therapeutic strategy.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.4
• /
• pp.301-314
• /
• 2005

Objective: Rebamipide is a propionic acid derivative that has an action of the inhibition of superoxide production and removal of hydroxyl radical with the sperm incubation and cryopreservation. In the present study, to investigate whether rebamipide is useful to treat male infertility and sterility, the author observed the antioxidative effects in patient with male infertility and also examined its absorption and distribution in rat genital organ. Methods: To measure the distribution of rebamipide in reproductive organ in the rat, carbon indicated rebamipide, $^{14}C-OPC-12759$, was orally administered to 10 Spraque-Dawley rats and its organ concentration in serum, liver, kidney, stomach, duodenum, colon, urinary bladder, seminal vesicle, epididymis and testicle were measured each time after 0.5, 1, 2, 4, 8 and 24 hours by using HPLC fluorescent method. The concentrations in semen were measured by HPLC fluorescent method in a sample of 50 infertile males who took 900 mg of rebamipide daily for 3 months. To measure the antioxidative effect and fertility rate for 3 months, each month before and after the treatment, sperm motility, vitality, the oxygen free radical formation, level of peroxidation, fetilizing capacity of semen sample which were obtained from infertile male patients by masturbation after at least 48 hours abstinence were analyzed by computer assisted semen analyzer, eosin-nigrosin stain, chemiluminescence, thiobarbituric acid method and hypo-osmotic swelling test. Simultaneously in a sample that wanted baby, both pregnancy and delivery were researched. Results: The $^{14}C-OPC-12759$ concentration in the body of white rats was highest in gastrointestinal organ like stomach, smal intestine and duodenum and followed by genital organ like seminal vesicle, testis and epididymis. The rebamipide concentration in semen of infertile males was $220.77{\pm}327.84ng/mL$ (SD) which showed a large deviation but it was higher than serum which was $126{\pm}76ng/mL$ (SD). In the infertile males, after the treatment with rebamipide, the level of seminal reactive oxygen species (ROS) and lipid peroxidation have significantly decreased in duration of the treatment (p<0.05) and sperm vitality and fertilizing capacity except sperm motility significantly improved on post treatment of 2~3 months (p<0.05). Out of the 41 cases who hoped for pregnancy, 15 cases (36.6%) became pregnant and 12 cases had childbrith, 2 cases had miscarriage and one case is ongoing. The side effect was observed in 1 case (2%) which experienced diarrhea but it was lost spontaneously. Conclusions: We conclude from this study that rebamipide showed relatively high tendancy of absorption and excretion in the genital organ. In infertile males who had elevated ROS in semen, by specifically inhibiting the cell damage from the antioxidation, a way to preserve sperm motility, vitality and fertilizing capacity was confirmed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.109-118
• /
• 1993

Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

• Animal Bioscience
• /
• v.36 no.8
• /
• pp.1190-1198
• /
• 2023

Objective: To our knowledge, there are few studies on the correlation between internal structure of fermented products and nutrient delivery from by-products from coffee processing in the ruminant system. The objective of this project was to use advanced mid-infrared vibrational spectroscopic technique (ATR-FT/IR) to reveal interactive correlation between protein internal structure and ruminant-relevant protein and energy metabolic profiles of by-products from coffee processing affected by added-microorganism fermentation duration. Methods: The by-products from coffee processing were fermented using commercial fermentation product, called Saus Burger Pakan, consisting of various microorganisms: cellulolytic, lactic acid, amylolytic, proteolytic, and xylanolytic microbes, for 0, 7, 14, 21, and 28 days. Protein chemical profiles, Cornell Net Carbohydrate and Protein System crude protein and CHO subfractions, and ruminal degradation and intestinal digestion of protein were evaluated. The attenuated total reflectance-Ft/IR (ATR-FTIR) spectroscopy was used to study protein structural features of spectra that were affected by added microorganism fermentation duration. The molecular spectral analyses were carried using OMNIC software. Molecular spectral analysis parameters in fermented and non-fermented by-products from coffee processing included: Amide I area (AIA), Amide II (AIIA) area, Amide I heigh (AIH), Amide II height (AIIH), α-helix height (αH), β-sheet height (βH), AIA to AIIA ratio, AIH to AIIH ratio, and αH to βH ratio. The relationship between protein structure spectral profiles of by-products from coffee processing and protein related metabolic features in ruminant were also investigated. Results: Fermentation decreased rumen degradable protein and increased rumen undegradable protein of by-products from coffee processing (p<0.05), indicating more protein entering from rumen to the small intestine for animal use. The fermentation duration significantly impacted (p<0.05) protein structure spectral features. Fermentation tended to increase (p<0.10) AIA and AIH as well as β-sheet height which all are significantly related to the protein level. Conclusion: Protein structure spectral profiles of by-product form coffee processing could be utilized as potential evaluators to estimate protein related chemical profile and protein metabolic characteristics in ruminant system.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.117-129
• /
• 1988

Packaged meal manufacturing establishments in Seoul city and Kyungkido province were assessed in terms of the sanitary conditions and practices, time and temperature, and microbiological quality. Sanitary check-lists were developed to evaluate the sanitary condition of sampled packaged meal manufacturing establishments. Microbiological tests on.food containers, equipments, and foods in various phases of product flow were done. The results of the study are summarized as follows; 1) Sanitary condition of kitchen.and sanitary practices of employees in.large and medium establishments were evaluated as the some improvement required in order to meet all standards. But sanitary practices of employees in small establishments were evaluated as the unsatisfactory state with negligence or ignorance of safe practice. 2) The microbiological quality of basic ingredients and food materials after pre-preparation were poor. 3) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, assembly and packaging before delivery were critical. 4) Microbiological test results for food containers, equipments indicated that sanitary conditions of stainless steel ware, knife, wiping clothes and cutting board should be improved promptly. 5) Critical control points identified were ingredients, pre-preparation, Holding, and assembly and packaging. 6) Guidelines were suggested for effective quality control of packaged meals production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1540-1544
• /
• 2003

This study chiefly aimed to ascertain the effect of age at weaning on caecal content characteristics, post-weaning performance and health of rabbits. A secondary aim was to study the effect of dietary restriction on performance and health of rabbits. After delivery, 30 litters of 8 pups each, were housed in separate cages. Fifteen litters were weaned 24 days from birth (group W 24) while the other 15 were weaned at 28 days (group W28). After weaning, 53 rabbits of group W24 and 56 of group W28 were fed ad libitum (group LIB), while 53 rabbits of group W24 and 57 of group W28 were restricted (group RES). All the rabbits were kept in individual cages. Fourteen other rabbits of groups W24 (7 fed ad libitum and 7 restricted) and 7 of group W28 were sacrificed to obtain data regarding caecum weight and caecal content. Age at weaning affected neither the state of health nor the final live weight. In comparison with those of group W28, the rabbits weaned at 24 days had a lower daily gain until 35 days of age but gain was higher subsequently. From the 28th day, however, the feed intake and the feed conversion ratio of the group W24 rabbits were always better than those of W28. The restricted diet until 42 days resulted in a lower weight both at 42 days (1,078 vs. 1,164 g) and at 70 days (2,192 vs. 2,294 g). Indeed, from the 42nd day, despite receiving feed ad libitum the rabbits of the restricted group continued to ingest less feed (120.8 vs. 127.2 g) than those of the ad libitum group, and had a slightly lower daily gain (39.8 vs. 40.3 g). The measurements carried out on the caecum highlighted significant differences among the groups in caecal content (33.1 vs. 31.7 vs. 25.3 g respectively for groups W24LIB, W28 and W24RES), for total volatile fatty acids (53.2 vs. 50.6 vs. 44.5 mmol/l respectively for groups W24LIB, W28and W24RES) for ammonia (7.0 vs. 7.2vs 8.8 mmol/l respectively for groups W24LIB, W28 and W24RES), for propionate (5.7 vs. 6.3 vs. 8.1% respectively for groups W24LIB, W28 and W24RES) and for propionate/butyrate (0.33 vs. 0.36 vs. 0.49 respectively for groups W24LIB, W28 and W24RES).

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1285-1285
• /
• 2024

In process plant construction, the implementation of design automation technologies is pivotal in reducing the timeframes associated with the design phase and in enabling the generation and evaluation of a variety of design alternatives, thereby facilitating the identification of optimal solutions. These technologies can play a crucial role in ensuring the successful delivery of projects. Previous research in the domain of design automation has primarily focused on parametric design in architectural contexts and on the automation of equipment layout and pipe routing within plant engineering, predominantly employing rule-based algorithms. Nevertheless, these studies are constrained by the limited flexibility of their models, which narrows the scope for generating alternative solutions and complicates the process of exploring comprehensive solutions using nonlinear optimization techniques as the number of design and engineering parameters increases. This research introduces a framework for automating plant design through the use of generative neural network models to overcome these challenges. The framework is applicable to the layout problems of process plants, covering the equipment necessary for production processes and the facilities for essential resources and their interconnections. The development of the proposed Neural-network (NN) based Generative Design Model unfolds in four stages: (a) Rule-based Model Development: This initial phase involves the development of rule-based models for layout generation and evaluation, where the generation model produces layouts based on predefined parameters, and the evaluation model assesses these layouts using various performance metrics. (b) Neural Network Model Development: This phase transitions towards neural network models, establishing a NN-based layout generation model utilizing Generative Adversarial Network (GAN)-based methods and a NN-based layout evaluation model. (c) Model Optimization: The third phase is dedicated to optimizing the models through Bayesian Optimization, aiming to extend the exploration space beyond the limitations of rule-based models. (d) Inverse Design Model Development: The concluding phase employs an inverse design method to merge the generative and evaluative networks, resulting in a model that outputs layout designs to meet specific performance objectives. This study aims to augment the efficiency and effectiveness of the design process in process plant construction, transcending the limitations of conventional rule-based approaches and contributing to the achievement of successful project outcomes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.127-134
• /
• 2010

This study was to investigate the effect of flavonoid treatment on in vitro development of bovine somatic cell nuclear transfer (SCNT) embryos, and their pregnancy and delivery rate after embryo transfer into recipient. In experiment 1, to optimize the flavonoid concentration, parthenogenetic day 2 ($\geq$ 2-cell) embryos were cultured in 0 (control), 1, 10 and $20\;{\mu}M$ flavonoid for 6 days. In the results, in vitro development rate was the highest in $10\;{\mu}M$ flavonoid group (57.1%) among treatment groups (control, 49.5%; $1\;{\mu}M$, 54.2%; $20\;{\mu}M$, 37.5%), and numbers of total and ICM cells were significantly (p<0.05) higher in $10\;{\mu}M$ flavonoid group than other groups. We found that $10\;{\mu}M$ flavonoid treatment can significantly (p<0.05) decrease the apoptotic index and derive high expression of anti-oxidant, anti-apoptotic, cell growth and development marker genes such as Mn-SOD, Survivin, Bax inhibitor, Glut-5, In-tau, compared to control group. In experiment 2, to produce the cloned Jeju Black Cattle, beef quality index grade 1 bull somatic cells were transferred into enucleated bovine MII oocytes and reconstructed embryos were cultured in $10\;{\mu}M$ flavonoid added medium. When the in vitro produced day 7 or 8 SCNT blastocysts were transferred into a number of recipients, $10\;{\mu}M$ flavonoid treatment group presented higher pregnancy rate (10.2%, 6/59) than control group (5.9%, 2/34). Total three cloned Jeju Black calves were born. Also, two cloned calves in $10\;{\mu}M$ flavonoid group were born and both were all healthy at present, while the one cloned calf born in control group was dead one month after birth. In addition, when the result of short tandem repeat marker analysis of each cloned calf was investigated, microsatellite loci of 11 numbers matched genotype between donor cell and cloned calf tissue. These results demonstrated that the flavonoid addition in culture medium may have beneficial effects on in vitro and in vivo developmental capacity of SCNT embryos and pregnancy rate.

• Korean Journal of Family Social Work
• /
• no.60
• /
• pp.133-173
• /
• 2018

This paper analyzes the consistency and the discrepancy between system and practices of the old age pension(Nyunronyungeum) in North Korea. The literature review is conducted to analyze the system. Specifically, the North Korean law and North Korean dictionaries were carefully examined. The interviews with 25 North Korean refugees were conducted to grasp the exact state of the old age pension in North Korea. Major findings are as follows: the consistency between system and practices of the old age pension in North Korea is identified only certain portions of that. Beneficiaries(blue-collar workers, white-collar workers, farmers, soldiers, and employees in foreign-invested enterprises), contribution periods, earning-related schemes, the totalization of periods of coverage(workplace transitions), the absence of double benefits and early retirement pension, and the delivery system around Civic Service offices(Dong offices) are confirmed by complete consistency. Preservation age, variations in the implementation of the pension system by region, and premium of the old age pension are confirmed by partial consistency. The length of service, the labor regulation, lump-sum payment, and double dipping are confirmed by discrepancies. It's important that this study brings about a better understanding the old age pension in North Korea through various original texts of North Korea and interviews with refugees. The results of this study are expected to contribute to the policy production for the age income security system after the unification and to the spread of unification perspectives.