• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.195-211
• /
• 2012

As the globalisation of corporate's managemental environment, all parts of logistics such as procurement, production and sales are globalized. The ways of transportation in Korea and Japan, where are difficult to use land-transportation, are sea-transportation and air-transportation. Sea & air is a way of the international transportation which is combined by Sea and Air to reduce the transportation fee and shorten the delivery time. The main body of multimodal transportation service is the corporate, actual carrier who undertakes the actual transport. It is essential to establish service quality to maintain their going concern. In other words, the actual carrier has to emphasize the importance of service quality to forwarder tan any other business conditions. In this study, we examine the determinants of service quality for actual carrier in multimodal transportation. Through the multi-regression analysis based on SERVPERF by Cronin and Taylor (1992), we analyze the service quality dimensions of actual carrier. Also we examine the relations between the determinants and customer's satisfaction. Using statistical hypothesis testing, the determinants of service quality are reliability, responsiveness, assurance, tangibles, and we could look into the factors which the actual carrier should control with priority.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.193-197
• /
• 2015

Recently, the new issues for the safety and the information delivery system in the ship are raised. The deployment and the efficient algorithms of deploying the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by reshaping some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-three way slave mode are designed and its measureed data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system with the three way algorithm for the deployment of the shipboard wireless networks can be achieved.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2016

In this paper we present a projection mapping system onto human's moving hand by a projector as information delivery media and Kinect to recognize hand motion. Most traditional projection mapping techniques project a variety of images onto stationary objects, however, our system provides new user experience by projecting images onto the center of the moving palm. We explain development process of the system, and production of content as applications on our system. We propose hardware organization and development process of open software architecture based on object oriented programming approach. For stable image projection, we describe a device calibration method between the projector and Kinect in three dimensional space, and a denoising technique to minimize artifacts from Kinect coordinates vibration and unstable hand tremor.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.128-136
• /
• 2011

This is a study on the subjectivity of audiences about preference of documentaries on TV. Accordingly, Q-methodology was used for this study. As a result, audiences' various characteristics by preference types were able to be found. The individual characteristics were classified into three styles: an entertainment-oriented style pursuing enjoyment, public and society interest-oriented style pursuing public purpose, and culture-oriented style pursuing artistic value of documentaries in order. It could be inferred from the classification of preference styles that unlike the past, the choice of TV broadcasting of audiences was shifting from the passive and media-dependent form to positive form. Therefore, the research and development of content delivery and production in the multi-media and multi-channel digital broadcasting era should be focused on not only the content itself but also an audience-centered service development model reflecting audiences' desire and hope.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.183-186
• /
• 2015

Recently, the demand for the safety and the information delivery system in the ship increases. The deployment of the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by deforming some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-two way slave mode are designed and its measurement data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system for the deployment of the shipboard wireless networks can be built.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.782-789
• /
• 2018

Multi-Function Display (MFD) of Korean Utility Helicopter (KUH) displays image information(navigation, flight, topographical and maintenance information) delivered from Mission Computer (MC) during flight operation. The abnormal display of MFD such as flickering phenomenon was identified in the system development. It was solved by improving the shielding performance of the DVI cable and changing the DVI cable installation path at the first mass production. However, it was occurred again when the aircraft was operated for one or two years after delivery. It was also identified in the evaluation process of the derivative helicopters. Therefore, a comprehensive review of the aircraft system level has been performed to solve the problem of MFD malfunction at first and then a design improvement plan was derived by improving the DVI cable. In this paper, the causes of MFD anomalies are analyzed and also the process of design improvement are summarized. The validity of the improvement has been verified through the DVI cable assembly comparison test, SIL/ground/flight test.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1196-1203
• /
• 2024

Objective: A study was conducted to quantify the performance differences of the near-infrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations. Methods: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters. Results: The performance of the developed NIRS calibration models was evaluated based on R², standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R² (coefficient of determination), standard error, and RPD. Although the R² of calibration models was mainly greater than 0.90 across the feed value indexes, the R² of cross-validations was much lower. The R² of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling. Conclusion: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.26-36
• /
• 2012

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for a smooth operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the mechanical quill system with a progressively quantitative distributor (M.D.S.) is improved in the electronically controlled quill system with an accumulating distributor (E.D.S.). In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate and inequality rate are experimentally investigated by applying E.D.S. to the developed cylinder lubricator. It is found that the oil feed rate of E.D.S. is higher than that of M.D.S. because of the increase of delivery speed and volume by changing the role of accumulator in the same experimental condition. It can be also shown that, in E.D.S., the inequality rate is decreased a little or hardly unchanged as the cylinder back pressure and plunger stroke is elevated, while the inequality rate increased in M.D.S.. The inequality rates of E.D.S. and M.D.S. are lowered as the lubricator motor speed is increased.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.656-663
• /
• 2016

The study focused on the printed sheet music delivering the classical music contents in the view of the media. Media scholar Marshall Mcluhan declared that the media is not just simple tool of delivery but is the main subject affecting the human perception and the content itself. The music media, sheet music invented by the development of the printing technique allowed the massive production and it generalized the classical music contents. However, the editing, the mandatory process for sheet music, created the editors who are standardizing and visualizing the music contents and until today, the sheet music delivers the editor's interpretation rather than the composer's. To prove this notion, the study will compare the manuscript and sheet music of Unaccompanied Violin Sonata no. 3 'Fugue' by J. S Bach and will discuss about the compatibility of the sheet music as the music media now.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.199-207
• /
• 2002

In order to develop a sustained release formulation of bovine somatotropin (BST), which has been used to increase the body weight of oxen or the milk production of dairy cows, poly(D,L-lactide-co-glyceride)(PLGA) microspheres were made by W/O/W multiple emulsification method and solvent extraction method. Physical properties including particle size, drug entrapment, drug release, protein denaturation, and in vivo body weight increase in rats were characterized. The size of the microspheres was increased as the molecular weight of PLGA increased. When Span 65 and stearic acid during preparation were added, the size was decreased but the amount of surface protein was increased, resulting in a high loading efficiency, with fast release of BST from the microspheres. Aggregation or fragmentation of BST by SDS-PAGE during microsphere preparation and drug release study was not observed. Body weight of Sprague-Dawley's male rats was significantly increased after subcutaneous administrations of BST-loaded PLGA microspheres. There was a good correlation between in vivo weight gain and in vitro release rate of microspheres. PLGA microspheres with a high surface protein ratio could be a good candidate for the sustained delivery of BST.