• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.139-146
• /
• 2014

In Korea's distribution and production field establishment of logistics information system and automation of logistics were greatly developed. But there is no characteristic and professionalism about hospital logistics, and distribution center is located in outside warehouse, logistics system is very important. Since hospital has human power to receive product, system is not as much required, but outside warehouse requires system for arrival from medicine and medical supplies wholesale dealer and vender, warehousing, storage, and automation facilities, and system for various works such as peaking instruction, classification, packing, cargo-working, delivery, order of medicine from hospital and non-medicine in hospital is essential. Therefore, This study is about development of automatic identification of slide which cannot be overlooked in efficiency of hospital logistics, establishment of database, and information interlocking between automatic storage system and outside warehouse.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.2
• /
• pp.172-180
• /
• 2023

Although it is highly dependent on the production of coastal and offshore fishing, the Fishing Vessels Safety Fisheries Act was enacted in 2019 due to the continuous increase in marine accidents of coastal and offshore fishing vessels. However, the law is too focused on fishing and navigation in certain waters and does not contain accident-preventive content. Ministry of Oceans and Fisheries proposes a plan to revise the Fishing Boat Safety Fishing Act through legal comparison with Japan's Seafarers' Labor Sanitation Rules. It also proposes an amendment that includes the content of the Seafarers Act on post-accident action obligations. Under the Fishing Vessels Safety Fishing Act, the safety fishing education is implemented for specific people and adopts a method of delivery education after completing the education. The reason for this is that the educational requirements are not sufficient compared to the number of education personnel. Moreover, four hours of education are conducted once a year, which is not suitable for insufficient educational conditions. For efficient safety fishing education, improvement measures are proposed compared to education in the United States and the United Kingdom.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.260-267
• /
• 2011

Nowadays, automobile manufacturers are faced with increasing global competition which is required low cost as well as high quality. To reduce shipping and handling cost and delivery time, lots of automobile manufactures tried to build their new factory in the neighborhood of market. Simultaneously, many factories are under construction in developing countries to make efficient use of low-wage workers. However, because systems are installed in developing countries as the same type of domestic facilities, systems have lots of problems such as high installation cost and inefficient use of manpower. To find core problems and generate optimal solution of these problems, thinking process of TOC(Theory Of Constrains) is used. In case of transmission gear machining system, semi-auto system is proposed as the best solution to increase manpower efficiency and system utilization. Semi-auto system consists of automatic machining process and manual transporting process. The system layout is generated based on semi-auto process concept. And, 3D simulation method using QUEST is used to verify production volume of generated system.

• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.41-50
• /
• 2001

Electronic commerce offers the opportunity to integrate and optimize the global production and distribution supply chain. Rapid response to changes in demand and customer preference, and the ability to exploit new technologies, are becoming critical. The computer of the various corporations communicate with each other to determine the price and the availability of the components, to place and confirm orders, and to negotiate delivery time scales. In this paper, We describe a trading system that is based on mobile agent technology, called aglet. Aglets for the buyer and sellers are dispatched to the various marketplace, where they negotiate autonomously orders and deliveries, returning to the buyer and seller with their best deals for approval. We show that the electronic commerce system is feasibly built by using the Java aglet technology to demonstrate for simulating a traditional retail marketplace.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.389-407
• /
• 2020

With YouTube's overwhelming share of the market, research on analyzing the types of content on YouTube is essential. An analysis of major global fashion YouTubers that the types of video content could be largely classified into three main categories: Fashion, beauty and daily life. The fashion category was subdivided into styling and fashion product review content type. The beauty category was subdivided into tutorials, beauty product reviews, and beauty tip content types. The daily life category was subdivided into daily sharing, consultation, and Q & A content types. Video content within fashion YouTuber channels is accompanied by expertise in fashion and beauty. At the same time, videos on daily life are uploaded, and through interactive communication with viewers, YouTubers form an intimate bond with subscribers. Content emphasizing entertainment, not just information delivery that introduces fashion products, is attracting growing interest among subscribers. This study analyzed the content of the increasingly popular fashion YouTuber channels and determined its important characteristics. The study makes a significant contribution to academic research by laying a foundation for future studies of YouTube content in the fashion field. Since differences in country of birth and race among YouTubers may influence content production, follow-up research will be conducted on the types and characteristics of domestic fashion YouTubers.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.42-49
• /
• 2022

In recent years, Owner, Architects, and Contractor are increasingly collaborating with each other from pre construction phase in construction projects, which is called Early Contractor Involvement (ECI). In Japan, the ECI method has been introduced in several public building projects since 2015. The purpose of this study is mainly to clarify the characteristics of the ECI method in Japan and to compare the contract clauses of the ECI method in the UK and the USA. The results of the survey are as follows. (1) the ECI method was supposed to make it possible to achieve appropriate quality, cost, and construction period by reflecting Contractor's technology and know-how in the design documents and specifications. (2) According to the database, there were 27 cases of the ECI method in Japan from 2015 to 2021, of which 13 cases for which bidding information could be obtained had a variety of technical proposals, mainly VE proposals, depending on the project characteristics. (3), Japan's ECI method has very much in common with SBC + PCSA in the UK. On the other hand, ECI Method in Japan differs from in the UK in that Owner, Architect, and Contractor enter into a partnership agreement, which is similar to ConsensusDocs CD541 in the USA. (4) The ECI method in Japan has the following problems: Owner depends on Contractor for cost control, the division of roles among project members is complicated, and more work from Owner than the DBB method are required.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.2
• /
• pp.31-40
• /
• 2014

The management of vehicular supply of "perishable" construction material, such as concrete mixes, faces a series of uncertainties such as weather, daily traffic patterns and accidents. Presented in this paper is a logistics control model for managing a hauling fleet with interrelated processes at both ends and queue capacities. Discrete event simulation is used to model the complex interactions of production units and the randomness of the real world. Two alternative strategies for ready mix concrete delivery, with and without an off-site waiting queue, are studied to compare supply performance. Secondly, the paper discusses the effect of an agent-based GPS tracking system providing real-time travel data that lessens the uncertainty of trucking time. The results show that the combination of GPS information with off-site queuing reduces productivity loss and process wastes of concrete placement as well as the idleness of supply trucks when crew or pump experience an unexpected stoppage.

• IE interfaces
• /
• v.17 no.1
• /
• pp.71-77
• /
• 2004

At the present time, container transportation plays a key role in the international logistics and the efforts to increase the productivity of container logistics become essential for Korean trucking companies to survive in the domestic as well as global competition. This study suggests an approach for determining fleet size for container road transportation with dynamic demand. Usually the vehicles operated by the transportation trucking companies in Korea can be classified into three types depending on the ways how their expenses occur; company-owned truck, mandated truck which is owned by outsider who entrust the company with its operation, and rented vehicle (outsourcing). Annually the trucking companies should decide how many company-owned and mandated trucks will be operated considering vehicle types and the transportation demands. With the forecasted monthly data for the volume of containers to be transported a year, a heuristic algorithm using tabu search is developed to determine the number of company-owned trucks, mandated trucks, and rented trucks in order to minimize the expected annual operating cost. The idea of the algorithm is based on both the aggregate production planning (APP) and the pickup-and-delivery problem (PDP). Finally the algorithm is tested for the problem how the trucking company determines the fleet size for transporting containers.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.171-178
• /
• 2002

At the present time, container transportation plays a key role in the international logistics and the efforts to increase the productivity of container logistics become essential for Korean trucking companies to survive in the domestic as well as global competition. This study suggests an approach for determining fleet size for container road transportation with dynamic demand. Usually the vehicles operated by the transportation trucking companies in Korea can be classified into three types depending on the ways how their expenses occur; company-owned truck, mandated truck which is owned by outsider who entrust the company with its operation, and rented vehicle (outsourcing). Armually the trucking companies should decide how many company-owned and mandated trucks will be operated considering vehicle types and the transportation demands. With the forecasted monthly data for the volume of containers to be transported a year, a heuristic algorithm using tabu search is developed to determine the number of company-owned trucks, mandated trucks, and rented trucks in order to minimize the expected annual operating cost The idea of the algorithm is based on both the aggregate production planning (APP) and the pickup-and-delivery problem (PDP). Finally the algorithm is tested for the problem how the trucking company determines the fleet size for transporting containers.

• Korean Institute of Interior Design Journal
• /
• no.32
• /
• pp.64-71
• /
• 2002

Today, term of ‘industrial society’means the totally changing society by new technical innovation through the Industrial Revolution begun in England at the mid-nineteenth century and it made social structure centering agricultural culture change with industrial culture with expansion of goods by the massive production. Information working area has to bo a space not just for improving business efficiency in industrial society but for developing efficiency in working in harmony with the information and structural aspects based on computer and communication technology. There are two kinds of environmental elements of working space : the tangible ones are the area and the structure of working space, lights, network, layout and information machines in office, the intangible ones are a feeling of satisfaction of management and arrangement of office information machines capability of information delivery, common ownership of documents and their files, the security and connection between office workers, and harmony. According to the wave of information begun from the late twentieth century, structural layout of working area has become various by the working type through network of new developed information communication machines. But it is hard to apply them in actually.