• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1527-1530
• /
• 2002

Factor analysis was applied to the phenotypic correlation matrix of 15 linear type traits (scored linearly 1 to 50 points) for 2035 Holstein cows of 38 sires computed from data collected between 1988 and 1992 in Beijing Shuangqiao Farm and Beijing Xijiao Farm. The 15 linear type traits were stature, body strength, body depth, dairy form, rump angle, rump length, rump width, rear leg side view, foot angle, fore udder attachment, rear udder height, rear udder width, udder cleft, udder depth and teat placement rear view. The first four components accounted for 49.1% of the total variance in type scores. Factor 1 reflected strong cows, with deep bodies, with long and wide rumps, and tall in stature. Factor 2 reflected cows with well attached fore udders, wide rear udders and whose udders were supported by strong suspensory ligaments with close teat placement. Factor 3 reflected cows with good dairyness, sickled in the hocks, high rear udders and udder floors above the hocks. Factor 4 reflected cows with sloping rumps from hooks to pins and with steep foot angle. Principal component and factor analyses are useful to clarify the relationships among type traits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1776-1783
• /
• 2002

A population segregating for the naked neck (Na) gene was used to evaluate its effect on fast growing broilers at heat stress. An experimental stock comparable to those of modern broilers was established by backcrossing to colour synthetic male and female lines. Matings between heterozygous (Na/na) males and females produced normally feathered (na/na), heterozygous (Na/na) and homozygous (Na/Na) chicks for the present study. Day old to seven week old coloured broilers of three genotypes viz. normally feathered (na/na), heterozygous naked neck (Na/na) and homozygous naked neck (Na/Na) were compared for heat dissipation, growth performance, body conformation traits, blood biochemical parameters and carcass traits in tropical climate. In hot climate, naked neck broilers had significantly less body temperature and better heat dissipation capabilities as compared to normal broilers. The naked neck broilers had significantly higher body weight and better feed conversion ratio than na/na broilers. The Na/Na or Na/na broilers exhibited higher giblet yield, blood loss and lower feather mass compared to na/na broilers. The results indicated that the reduction in feather coverage in Na/Na and Na/na broilers facilitates better heat dissipation with lower body temperature, more body weight gain, better FCR and carcass traits compared to normal broilers.

• Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.78-87
• /
• 2021

Background: To understand shade and wind effects on seedling traits of common reed (Phragmites australis), we conducted a mesocosm experiment manipulating day length (10 h daytime a day as open canopy conditions or 6 h daytime a day as partially closed canopy conditions) and wind speed (0 m/s as windless conditions or 4 m/s as windy conditions). Results: Most values of functional traits of leaf blades, culms, and biomass production of P. australis were higher under long day length. In particular, we found sole positive effects of long day length in several functional traits such as internode and leaf blade lengths and the values of above-ground dry weight (DW), rhizome DW, and total DW. Wind-induced effects on functional traits were different depending on functional traits. Wind contributed to relatively low values of chlorophyll contents, angles between leaf blades, mean culm height, and maximum culm height. In contrast, wind contributed to relatively high values of culm density and below-ground DW. Conclusions: Although wind appeared to inhibit the vertical growth of P. australis through physiological and morphological changes in leaf blades, it seemed that P. australis might compensate the inhibited vertical growth with increased horizontal growth such as more numerous culms, indicating a highly adaptive characteristic of P. australis in terms of phenotypic plasticity under windy environments.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1100-1104
• /
• 2021

Objective: The objective of present study was to estimate heritability of non-return rate (NRR) and success of first insemination (SFI) by using the Bayesian approach with Gibbs sampling. Methods: Heifer Traits were denoted as NRR-h and SFI-h, and cow traits as NRR-c and SFI-c. The variance covariance components were estimated using threshold model under Bayesian procedures THRGIBBS1F90. Results: The SFI was more relevant to evaluating success of insemination because a high percentage of animals that demonstrated no return did not successfully conceive in NRR. Estimated heritability of NRR and SFI in heifers were 0.032 and 0.039 and the corresponding estimates for cows were 0.020 and 0.027. The model showed low values of Geweke (p-value ranging between 0.012 and 0.018) and a low Monte Carlo chain error, indicating that the amount of a posteriori for the heritability estimate was valid for binary traits. Genetic correlation between the same traits among heifers and cows by using the two-trait threshold model were low, 0.485 and 0.591 for NRR and SFI, respectively. High genetic correlations were observed between NRR-h and SFI-h (0.922) and between NRR-c and SFI-c (0.954). Conclusion: SFI showed slightly higher heritability than NRR but the two traits are genetically correlated. Based on this result, both two could be used for early indicator for evaluate the capacity of cows to conceive.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1247-1253
• /
• 2003

Selection for increased milk production in dairy cows has often resulted in a higher incidence of disease and thus incurred a greater health costs. Considerable interests have been shown in breeding dairy cattle for disease resistance in recent years. This paper discusses the limitations of breeding dairy cattle for genetic resistance in six parts: 1) complexity of disease resistance, 2) difficulty in estimating genetic parameters for planning breeding programs against disease, 3) undesirable relationship between production traits and disease, 4) disease as affected by recessive genes, 5) new mutation of the pathogens, and 6) variable environmental factors. The hidden problems of estimating genetic and phenotypic parameters involving disease incidence were examined in terms of categorical nature, non-independence, heterogeneity of error variance, non-randomness, and automatic relationship between disease and production traits. In light of these limitations, the prospect for increasing genetic resistance by conventional breeding methods would not be so bright as we like. Since the phenomenon of disease is the result of a joint interaction among host genotype, pathogen genotype and environment, it becomes essential to adopt an integrated approach of increasing genetic resistance of the host animals, manipulating the pathogen genotypes, developing effective vaccines and drugs, and improving the environmental conditions. The advances in DNA-based technology show considerable promise in directly manipulating host and pathogen genomes for genetic resistance and producing vaccines and drugs for prevention and medication to promote the wellbeing of the animals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.135-138
• /
• 1993

Twelve intact and 12 docked Najdi lambs of equal numbers of males and females were utilized in the experiment. All lambs were raised under similar conditions until they attained 40 kg shorn and shrunk body weight. Thereafter, lambs were individually fed ad libitum on a diet formulated to contain 11.20 MJ ME/kg and slaughtered after 60 days feeding period. The results showed that Najdi rams averaged 6.14 kg more total gain (p < .05), required 6.80 kg less feed (p < .05) per kg of gain and produced 3.2 and 3.07 kg more (p < .05) carcass and salable cuts weights over the feeding period than comparable ewes. Body wall thickness and kidney and pelvic fat weight were greater (p < .05) for ewes than for rams; dressing percent, longissimus area and fat thickness were not significantly influenced by sex of lambs. Docked lambs kept for 60 days on feed required 1.80 kg less feed (p < .05) per kg of gain and produced 2.21 kg more (p < .05) salable wholesale cuts weight than intact lambs. Docking was not a significant source of variation for total gain, carcass weight, dressing percent, longissimus dorsi area, body wall thickness and fat thickness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.5
• /
• pp.543-555
• /
• 2010

The objectives of this research were the estimation of genetic parameters and trends for weaning-to-first service interval (WSI), and litter traits in a commercial swine population composed of Landrace (L), Large White (T), LT, and TL animals in Chiang Mai, Northern Thailand. The dataset contained 4,399 records of WSI, number of piglets born alive (NBA), litter weight of live piglets at birth (LBW), number of piglets at weaning (NPW), and litter weight at weaning (LWW). Variance and covariance components were estimated with REML using 2-trait analyses. An animal model was used for WSI and a sire-dam model for litter traits. Fixed effects were farrowing year-season, breed group of sow, breed group of boar (litter traits), parity, heterosis (litter traits), sow age, and lactation length (NPW and LWW). Random effects were boar (litter traits), sow, permanent environment, and residual. Heritabilities for direct genetic effects were low for WSI (0.04${\pm}$0.02) and litter traits (0.05${\pm}$0.02 to 0.06${\pm}$0.02). Most heritabilities for maternal litter trait effects were 20% to 50% lower than their direct counterparts. Repeatability for WSI was similar to its heritability. Repeatabilities for litter traits ranged from 0.15${\pm}$0.02 to 0.18${\pm}$F0.02. Direct genetic, permanent environment, and phenotypic correlations between WSI and litter traits were near zero. Direct genetic correlations among litter traits ranged from 0.56${\pm}$0.20 to 0.95${\pm}$0.05, except for near zero estimates between NBA and LWW, and LBW and LWW. Maternal, permanent environment, and phenotypic correlations among litter traits had similar patterns of values to direct genetic correlations. Boar genetic trends were small and significant only for NBA (-0.015${\pm}$0.005 piglets/yr, p<0.004). Sow genetic trends were small, negative, and significant (-0.036${\pm}$0.013 d/yr, p<0.01 for WSI; -0.017${\pm}$0.005 piglets/yr, p<0.007, for NBA; -0.015${\pm}$0.005 kg/yr, p<0.01, for LBW; -0.019${\pm}$0.008 piglets/yr, p<0.02, for NPW; and -0.022${\pm}$0.006 kg/yr, p<0.003, for LWW). Permanent environmental correlations were small, negative, and significant only for WSI (-0.028${\pm}$0.011 d/yr, p<0.02). Environmental trends were positive and significant only for litter traits (p<0.01 to p<0.0003). Selection based on predicted genetic values rather than phenotypes could be advantageous in this population. A single trait analysis could be used for WSI and a multiple trait analysis could be implemented for litter traits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1207-1214
• /
• 2017

Since the industrialization of swine production in the late 1900s, swine farms in the United States, as well as in Europe, have largely become consolidated. Pig farms became larger in size but fewer in number, with 91% of market pigs being produced by large operations with 5,000 or more pigs on-site in the US, and only 3% of the total utilized agricultural land representing organic farming. Such change in the market made it difficult for small farmers to stay competitive, forcing them to find alternative ways to reduce the cost of production and increase profit using the outdoor production system. In contrast to the indoor confinement system, outdoor production system uses pasture-based units and/or deep-bedded hoop structures that promote animal welfare and environmental sustainability with a lower capital investment. In accord with the growing concern for animal and environmental welfare and food safety by the consumers, small farmers practicing an outdoor production system are seeing increased opportunities for marketing their products in the pork niche market. Unlike the general belief that the reproductive and growth performance measures of the outdoor sows and piglets are poorer in comparison with the animals reared indoors, studies showed that there was no significant difference in the performance measures, and some traits were even better in outdoor animals. Improved reproductive and production traits can increase the sustainability of outdoor farming. Present study reviewed the recent studies comparing the performance measures, meat quality and health of indoor and outdoor animals, as well as the efforts to improve the outdoor production system through changes in management such as hut types and breed of animals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.913-921
• /
• 2019

Objective: The objectives of this study were to compare identified informative regions through two genome-wide association study (GWAS) approaches and determine the accuracy and bias of the direct genomic value (DGV) for milk production traits in Korean Holstein cattle, using two genomic prediction approaches: single-step genomic best linear unbiased prediction (ss-GBLUP) and Bayesian Bayes-B. Methods: Records on production traits such as adjusted 305-day milk (MY305), fat (FY305), and protein (PY305) yields were collected from 265,271 first parity cows. After quality control, 50,765 single-nucleotide polymorphic genotypes were available for analysis. In GWAS for ss-GBLUP (ssGWAS) and Bayes-B (BayesGWAS), the proportion of genetic variance for each 1-Mb genomic window was calculated and used to identify informative genomic regions. Accuracy of the DGV was estimated by a five-fold cross-validation with random clustering. As a measure of accuracy for DGV, we also assessed the correlation between DGV and deregressed-estimated breeding value (DEBV). The bias of DGV for each method was obtained by determining regression coefficients. Results: A total of nine and five significant windows (1 Mb) were identified for MY305 using ssGWAS and BayesGWAS, respectively. Using ssGWAS and BayesGWAS, we also detected multiple significant regions for FY305 (12 and 7) and PY305 (14 and 2), respectively. Both single-step DGV and Bayes DGV also showed somewhat moderate accuracy ranges for MY305 (0.32 to 0.34), FY305 (0.37 to 0.39), and PY305 (0.35 to 0.36) traits, respectively. The mean biases of DGVs determined using the single-step and Bayesian methods were $1.50{\pm}0.21$ and $1.18{\pm}0.26$ for MY305, $1.75{\pm}0.33$ and $1.14{\pm}0.20$ for FY305, and $1.59{\pm}0.20$ and $1.14{\pm}0.15$ for PY305, respectively. Conclusion: From the bias perspective, we believe that genomic selection based on the application of Bayesian approaches would be more suitable than application of ss-GBLUP in Korean Holstein populations.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.344-350
• /
• 2003

This Paper deals with the weight-lowering and the traits of NVH(Noise, Vibration and Harshness) by the development of tubular shaft replacing the existing solid Drive Shaft for the lighter and less-noisy automobiles. By the review of Swaging Process this study reveals the various forming traits of Swaging, one of the forming methods for tubular shafts. Furthermore, it showed the possibility of Drive Shaft manufacturing through designing & manufacturing of Swaging machine for tubular shaft, and the production ar analysis of the tubular shaft with the relevant process and tools. This study also shows that the forming by swaging not only makes the mass production of tubular Drive Shaft possible but also may be widely applied to other products with many advantages in review of dimensional precision, thickness change, hardness increase and surface roughness of the swaged products.