• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.26-33
• /
• 2011

Objectives: The purpose of this retrospective cohort study was to investigate the relationship between exposure of Korean workers to petrochemicals in the refinery/petrochemical industry and lymphohematopoietic cancers. Methods: The cohort consisted of 8,866 male workers who had worked from the 1960s to 2007 at one refinery and six petrochemical companies located in a refinery/petrochemical complex in Korea that produce benzene or use benzene as a raw material. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for 1992-2007 and 1997-2005 based on the death rate and cancer incidence rate of the Korean male population according to job title (production, maintenance, laboratory, and office workers). Results: The overall mortality and most cause-specific mortalities were lower among these workers than those of the general Korean population. Increased SMRs were observed for leukemia (4/1.45; SMR 2.77, 95% CI: 0.75-7.09) and lymphohematopoietic cancers (5/2.51; SMR 2, 95% CI: 0.65-4.66) in production workers, and increased SIRs were also observed in leukemia (3/1.34; SIR 2.24, 95% CI: 0.46-6.54) and lymphohematopoietic cancers (5/3.39; SIR 1.47, 95% CI: 0.48-3.44) in production workers, but the results were not statistically significant. Conclusion: The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.79-90
• /
• 2006

Recently the construction of the ERP(Enterprise Resource Planning) system becomes accomplished actively from the many enterprises. But the many problems occur in acquisition of production data which is a fundamental data of system. Also to delay the acquisition of the production result is fatal in the efficient business operation. The construction of the POP(Point of Production) system which acquires production data at real time is become accomplished widely, In the POP system it is most important to acquire the production data which is accurate. But the many enterprises drop the competitive power with acquisition of the data which could not be trusted. In this paper, we analyze these causes and present the method which it can improve the reliability of production data. Also we introduce a real application case.

• Journal of Food Hygiene and Safety
• /
• v.11 no.4
• /
• pp.227-234
• /
• 1996

This study was designed to characterize endotoxin-induced prostaglandin production in primary cultured rat vascular smooth muscle cells (VSMC). The time course for prostaglandin synthesis in lipopolysaccharide (LPS)-stimulated VSMC showed that the maximum production was reached in 12 hours. LPS induced prostaglandin H2 synthase (PGHS) activity in VSMC and the time course profile in the changes of PGHS activity paralleled that of total prostaglandin production. Differential treatment showed that 4 hours' exposure to LPS was enough for the maximum effect on the prostaglandin production and this effect was completely inhibited by the co-treatment of actinomycin D, a transcription inhibitor. These results suggest that LPS effect might be determined within 4 hours. Actinomycin D increased PGHS activity without affecting prostaglandin production if added 4 hours after LPS treatment. On the other hand, cyclogeximide, a translation inhibitor, augmented LPS-induced prostaglandin production if treated during first four hours, but it inhibited LPS-induced PGHS activity regardless of treatment schedule. These results suggest the existence of multiple regulating mechanisms in the LPS-induced prostaglandin synthesis.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.203-206
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.93-105
• /
• 2001

Many production management systems for increasing productivity, minimizing inventory, keeping due dates and maximizing use of resources have been proposed, and GT, MRP and JIT are frequently used among these systems. The three systems have merits and demerits through comparing with each other. Because each system has mutual dependence, a hybrid production system Is necessary for using their merits maximally. In this study, a hybrid production system is designed by combining GT, MRP and JIT, which is suitable in the domestic production system and it is presented as followings. -. Basic research works for G7, MRP and JIT. -. Comparison and analysis are carried out for each system.- . The hybrid production system is designed. -. The hybrid production system is developed.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.117-122
• /
• 2012

This paper deals with the productivity increment through construction of lean production system for automobile factory in China. This lean production system has been progressed according to 5 steps. Step 1 is the work preparation. Step 2 is the process design. Step 3 is the establishment of method to count production quantity. Step 4 is the establishment of measuring method for input and output. Finally, step 5 is the construction of flexible production system able to adapt for environment change. This lean production system is expected to obtain the productivity increment by 50% for plastic plant and reduction by 50% in inventory quantity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.170-178
• /
• 2024

This study aimed to quantitatively analyze the risk using data from 329 safety accidents that occurred in aquaculture fisheries management vessels over the recent five years (2018-2022). For quantitative risk analysis, the Bayesian network proposed by the International Maritime Organization (IMO) was used to analyze the risk level according to the fishing process and cause of safety accidents. Among the work processes, the fishing process was analyzed to have the highest risk, being 12.5 times that of the navigation, 2.7 times that of the maintenance, and 8.8 times that of the loading and unloading. Among the causes of accidents, the hull and working environment showed the highest risk, being 1.7 times that of fishing gear and equipment, 4.7 times that of machinery and equipment, and 9.4 times that of external environment. By quantitatively analyzing the safety accident risks for 64 combinations of these four work processes and four accident causes, this study provided fundamental data to reduce safety accidents occurring in aquaculture fisheries management vessels.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.3
• /
• pp.1-15
• /
• 2005

Recently in Korean Society, risk and safety has become a central discourse in not only the social and natural science but also political decision making. The efficient organizational management contributes to controlling the risk factors in the workplace. For the management is influenced and improved by the organizational culture, the alternatives more than simply improving the work environment or enforcing the education of safety on each workers are required. This study was the status of safety culture in organizational members(managers and workers, and specialist) including the attitude on the safety atmosphere and risk perception, and experiences, knowledges, motivation etc. For this part, the method of questionnaire and statistical analysis are mobilized. The degree of safety commitment of organization members appears relatively high (3.97 in five scale estimation), but there are variations in this results according to socio-demographic characteristics. At the same time, managers and professionals actively participation in the program related to safety than workers in production/sales. The higher income level and career is the more attention to the safety is. Based on this survey, we make an rough suggestion of several tasks to the policy -makers: improvement of communication on the risk and safety is required and in particular, the workers in the relatively low level in production/sales. The education system about safety which is, with one-side, provided by government or managers turns out to be inefficient. Rather, small group performance of the organizational members which they participate in the communication with interaction in the various discourse are able to provoke the safety mood in workplace.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2723-2733
• /
• 2023

Transuranic nuclides (such as ²³⁸Pu, ²⁵²Cf, ²⁴⁹Bk, etc.) have a wide range of application in industry, medicine, agriculture, and other fields. However, due to the complex conversion chain and remarkable fission losses in the process of transuranic nuclides production, the generation amounts are extremely low. High flux reactor with high neutron flux and flexible irradiation channels, is regarded as the promising candidate for producing transuranic nuclides. It is of great significance to increase the conversion ratio of transuranic nuclides, resulting in higher efficiency and better economy. In this paper, we perform an optimization design evaluation of producing transuranic nuclides in high flux reactor, which includes optimization design of irradiation target and influence study of reactor core loading. It is demonstrated that the production rate increases with appropriately determined target material and target structure. The target loading scheme in the irradiation channel also has a significant influence on the production of transuranic nuclides.

• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.9-19
• /
• 1995

The recent development of NC lathe and machining renter have enabled automatic or unmanned manufacturing system for the improvement of production rate. And if you want to introduce automatic or unmanned manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions, rational tool grades and tool angles are necessary. As a result, the selection of cutting conditions, tool grades and tool angles are important factors to production rate.