• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.604-611
• /
• 2011

Several wild yeasts were isolated from Korean grape varieties before and during spontaneous fermentation. Among them, four strains were isolated based on the alcohol content and flavor production in wine after fermentation of apple juice. In this study, the four yeast strains were identified and characterized. PCR-restriction fragment length polymorphism analysis of ITS I-5.8S-ITS II region with restriction endonuclease Hae III and Hinf I resulted in that all the strains showed a typical pattern of Saccharomyces cerevisiae. Pulse field gel electrophoresis showed three different chromosome patterns with a same band between strains SS89 and SS812. When ITS I-5.8S-ITS II sequences of the four strains were compared with one another, they were similar to those of Saccharomyces cerevisiae CBS 4054 type strain. Identity of the sequences was higher than 97% with those of the type strain. Phylogenetic analysis showed based on the sequences showed they were genetically closed to the type strain. The four identified strains were tested in a medium containing 200 ppm potassium metabisulfite, and the MM10 and WW108 inhibition rates resulted at up to 24 h. The four strains were tested at an incubation temperature of $30^{\circ}C$. The 30% sugar concentration in the medium (w/v) showed the highest growth in 36 h, especially in the case of SS89, which was close to growth 40. The four strains were tested in an 8% ethanol medium (v/v). Alcohol tolerance was initially kept in the incubation process. The strains began to adapt, however, to the exceeded resistance. The four strains showed the lowest inhibition rate at 24 h.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.624-632
• /
• 2012

As there have been lately many worldwide resource challenges such as potential exhaustion of fossil fuels, sudden rise of oil price and ever-rising grain pricing due to global food crisis, there have been more interests focused on recycling vegetable oils and fats into clean natural fuel and producing new resources based on waste cooking oil as a part of reusing waste resources. An Experiment was performed by using ratio of 50:50, 75:25 (w/w) mixture of based rapeseed oil, camellia oil, and olive oil. 50:50, 25:75 (w/w) mixture of based palm oil. The result was that the oleic acid ($C_{18:1}$) got the lowest percentage of 42.8%, when we combined the mixture of rapeseed oil and soybean oil. While the highest percentage of 72.1% was when the mixture of camellia oil and rapeseed oil were combined at 50:50 ratio. In 75:25 (w/w) case, mixture of rapeseed oil and soybean oil got the lowest. The highest ratio was the mixture of camellia oil and olive oil. Based on the component of palm oil, the total saturated fatty acid was decreased. It is expected that stabilizing oxidation through controlling of fatty acid after mixture and that liquidity at a low temperature. The acid value indicated that stabilizing oxidation got a range of highest to lowest. Camellia oil ranked as the highest, followed by olive oil, and the oil seeds as the lowest in rank. Controlling iodine value through mixture and improvement of stabilizing oxidation will provide a good quality. The quality of color has no significant change about mixture in ratio and maintenance. The reduction of the cost of refining process is expected by controling of mixture ratio at biodiesel production in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.1
• /
• pp.50-56
• /
• 1994

This study was investigated for the purposes of securing forage resource using idled rice paddy recently increased in accordance to a current trend of farm products' liberalization and also of presevation of environment by using cattle sluny as liquid manure, which is seriously increasing these days. In this study, mean annual dry matter yield and its seasonal variation with reed canarygrass, and a optimum rate of cattle sluny application were investigated. The results are as follows: 1. According to the conditions of cutting frequencies(3, 4 and 5 cutting per year), mean annual dry matter yield was recorded from 8.9 tons to 10.9 tons per hectare and was the highest at 3 cutting frequency. 2. The use of cattle sluny with the levels of between 300 and 360 kg N per hectare showed a significantly higher mean annual dry matter yield than that of the control (non-fertilization). 3. The treatments with 3 and 4 cutting frequencies(90 kg Nhdyear, 120 kg Nhdyear) recorded higher dry matter yields than the control of the former level by 1.23 tons and 2.34 tons respectively and in the treatment of 5 cutting frequency, the second level with cattle sluny of 300 kg Nhdyear showed an increased dry matter yield of 2.11 tons compared to the former level(l50 kg Nhdyear). With regards to nitrogen efficiency, one kg of nitrogen is applied to 13.7, 19.4 and 14.1 kg of dry matter yields in the conditions of 3, 4 and 5 cutting frequencies respectively. 4. In view of seasonal variance of annual dry matter yield, the second cut in 3 cutting frequency, the third cut in 4 cutting frequency and the third in 5 cutting frequency showed the highest ratio as 42, 37 and 32% respectively compared to the total. 5. Under the conditions of this study, the 'Input-Output curve' from 5 cutting frequency was the closest to sigmaformed process(i=0.9993) of various cutting frequencies, and the maximum marginal yield in the treatment was obtained at the level of 250 kg Nha with cattle sluny. The economic level of cattle sluny was between 371.0 and 402.2 kg N and the highest dry matter yield was obtained at 489.3 kg Mdyear in the same treatment

• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1243-1253
• /
• 2012

The production and secretion of growth hormone (GH) in the anterior pituitary gland can be induced by several natural products to control cell proliferation, differentiation, and migration. To investigate whether Chungkookjang (CKJ) produced by the fermentation process affects GH-related metabolism, the secretion and the response of GH were observed in pituitary cells and GH target cells. Among six CKJs manufactured by different strains of glycine max, only three CKJs, including Daewon (DW), Daepung (DP), and Taegwang (TG), induced GH secretion from GH3 cells at 5.0 mg/ml concentration. There were no significant changes detected in the viability of any of the cells treated with these CKJs. In addition, the increase in GH secretion from the GH3 cells was dependent on the concentration of the three types of CKJs. The proliferation of cell lines, including MG63 and HepG2 cells, that originated from those derived from the GH target organs was significantly activated by treatment with the GH-containing conditional medium (GCM) harvested from the three CKJ-treated GH3 cells, although their induction rate was different from each other. In these cells, p-STAT5 was maximally translocated into the nucleus of MG63 cells 30 min after DW treatment, while it was translocated in HepG2 cells at 60 min. These results suggest that these three types of CKJ could enhance the secretion of GH, as well as the GCM-derived response, in the two target organs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1610-1616
• /
• 2016

This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.99-120
• /
• 1998

The purpose of this study is to clarify the industrialization process, and locational factors and linkages of manufacturing in Jangyu-Myun, a suburb of Metropolitan Pusan, toward which heavy decentralization of manufacturing from Pusan has been done. Hard data and soft data were used as the basic data. Hard data used for this study were both the statistical data which consists of the number of establishments and employee classified by product type, firm size, organizational type and unit area(dong) which were listed in statistics yearbooks, and the list of the owner's names, addresses, employee number, products and headquarters of firms which were listed in firm directories. Soft data were the results of the interviews with the 53 owners of firms surveyed among the firms selected by Proportional Stratified Sampling Method. The major findings were as follows: (1) Manufacturing location in Jangyu-Myun was regularized in 1980's in which decentralization of manufacturing was activiated. Though the industrialization of study area resulted from the birth, relocation and establishment of branches of the firms originated from the other regions, the relocation of small outer-oriented firms from the central city was the most important factor among them. (2) The main locational factors which induced the decentralizing manufacturing from the central city into Jangyu-Myun are closely related to land, transportation, personal factor, raw material suppliers and market. (3) The differences of important locational factors by the size and organizational type of firms are relevant to the characteristics of manufacturing location. (4) The changes of linkages attendant upon locational changes of firms were not so great and were localized in labor supply and marketing. (5) The strength of linkages is strong in the procurement of materials, in the subcontraction and in the marketing, but not in the ordering. (6) The main factors influencing on the formation of linkages are different by the types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and production capacity in the subcontraction and ordering; characteristics of products and the subsequent difficulties, in the marketing. (7) With the exception of procurement linkages, the strength of linkages with the outside of the study area are stronger than the linkages with the inside. The strength of linkages with the outside has distance-decay-function and strong linkages with the central city. (8) These spatial characteristics of linkages are different by products type, firm size and organizational type of firms: the spatial ranges of linkages are wider in the multi-location firms than in the single-location firms; the larger the firm size, the wider the spatial range of linkages: there is no consistent trend by products type. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of central city manufacturing relocation on industrialization in the suburb: different decentralization by products type, firm size and organizational types of firms: different locational factors by products type, firm size and organizational types of firms; linkage changes attendant upon locational changes of firms; spatial differences of linkages by products type, firm size and organizational type of firms. Some other factors were proved to be partly consistent: locational factors and spatial characteristics of linkages. Accordingly I think that the results of previous studies on the other areas can be applicable to the explanation of the location and linkage of manufacturing in Jangyu-Myun. For the better explanation on the characteristics of manufacturing decentralization from the central city, more empirical case studies on the location and linkage of manufacturing in the suburb areas are necessary.

• Journal of the Korean association of regional geographers
• /
• v.4 no.2
• /
• pp.31-47
• /
• 1998

This paper deals with the historical geography of land-use and agriculture along the Lower Nam-River floodplains. The reclamation process of the river floodplains, the cultivation methods on the reclaimed lands, and the land-use patterns and processes are investigated. The Nam River, one of the major tributaries of the Nakdong River, flows through the boundary between Ham-An and Eu-Ryong Guns. Larger floodplains are located in Ham-An Gun. The floodplains of Ham-An Gun have been surveyed intensively in this study. In South Korea, the alluvial plains, mostly located along the river valleys, have been reclaimed to provide fertile agricultural lands. Those along the upper river valleys were reclaimed before those along the lower river valleys. The flood-plains of Han-An Gun were reclaimed to be the largest agricultural lands of the Gun. The natural levees along the Lower Nam-River Valley were identified before the reclamation processes but now hardly identified. Relatively larger floodplains are located along the tributary streams of the Nam River. Often there are low-lying back swamps between the natural levees and the hills/mountains that rise above the floodplains. The back swamps, called 'natural bog lands' in this region, have been reduced in size and in number through reclamation for the purpose of agricultural and industrial land-uses. Now about ten 'natural bog lands' are found in the Ham-An floodplains, and some of them are being reclaimed for the industrial land-use. This study suggests the emergent need of conservation for the remaining 'natural bog lands' in terms of ecology. Seven agricultural fields of large size, originated from the Nam-River floodplains, are identified in this study: Kun(큰들), Chung-Am(정암들), Chang-chi(장지들), Baek-San(백산들), Ha-Ki(하기들), Gu-Hae(구혜들), and Chang-Po(장포들) fields. The Kun field was reclaimed during the Japanese control and the Gu-Hae, in the 1950s. All of those except the above two fields were reclaimed after the mid-1960s. The Nam-River Dam in Chinju, completed in 1969, contributed the reclamation processes along the Lower Nam-River floodplains. The rice acreage of the region has been reduced slowly since 1970 but the rice production of the region has been relatively stable (Table 4). Rice culture had been the most important agriculture on the reclaimed lands for decades before the greenhouse vegetable cultivation became more important in the 1980s. Among the vegetables cultivated in the greenhouse, the watermelon is the dominantly leading one. Watermelons are usually harvested two or three times in a year though it is possible to harvest four times in one year. The rotation of watermelons and rice is common in the region. It is known the physical conditions of the Nam-River floodplains in Ham-An Gun is the most suitable for watermelon cultivation in South Korea.

• Journal of the Korean association of regional geographers
• /
• v.20 no.2
• /
• pp.163-175
• /
• 2014

This study is to explain social capital characteristics of Filipino immigrant women at the level of neighborhood. This research targeted Filipino immigrant women in the metropolis, small town and rural area in Korea to find out the relevance of individual property and characteristics of the community and social capital of neighboring communities- school community, cathedral community, etc- through measurement of the participants' recognition. This study reveals that differences exist in the relationship between length of residence and social capital in the school community and the catholic church community. There is a significant positive relationship between length of residence and political factors in the catholic church community, thereby having a better relationship with longer period of stay, while length of residence and confidence show a negative trend in the school community, leading to less confidence. The catholic church community holds a dominant position in homogeneity, cohesion, and the amount of social capital. According to the findings, social capital 'relation' is more closely related to homogeneity of the community, 'norms' to cohesion. 'Relation and norms' and 'confidence and politics' factors are recognized similarly in both communities, thus resulting in the recognition that decision making within the community, the share of value, and observance of social norms approximate a friendly relationship among members, and satisfaction level, emotional support, and confidence among members approach politics that members can talk about their personal matters. It is noted in the research process that the symbolism of the cathedral community as a transnational circuit behavior occurs where collective culture and personal desires of Filipino immigrant women were combined with production of social capital. Filipino immigrant women's awareness of community and social capital appearing in the cathedral community show that not only residence, along with the cultural identity of Filipino immigrant women, but also collective social and cultural characteristics, such as 'family reunion' can not be overlooked. In particular, at this time when discussion and debate on the interculturalism over multiculturalism is heating up, communal spirit and social capital based on the ethnic identity are important in that they can be a crucial path to the cross-cultural interaction with our society, therefore, a study on the social capital of the ethnic community needs to be encouraged and extended to more diverse communities, to the space of the multilayered scale.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.985-996
• /
• 2007

The purpose of this study is to analyze the symbolism of traditional Korean patterns which reflect an emotional cultural background of Korean people, to apply modernized and developed patterns to Textile Design for fashion cultural products, and to explore productive direction of developing designs of fashion cultural products. The process of developing Textile Design of fashion cultural products which applied symbolism of traditional Korean patterns was conducted as follows. Firstly, based on '05 S/S-'07 S/S fashion trends, a design concept wat decided(man-urban ethnic style, woman-romantic ethnic style). Secondly, motive was abstracted from selected traditional patterns to develop into modem patterns. Thirdly, items were selected according to symbolic meaning of traditional Korean patterns. Man's items included shirts, necktie, and handkerchief which were highly preferred by Korean and foreign visitors. Finally, developed textile designs were diagrammed by item using textile CAD and an illustrator 10 and presented as images. The following results were obtained. First, textile designs for fashion cultural products, in which apply traditional patterns may reflect the understanding of traditional aesthetic beauty and philosophical approach by applying symbolic significance inherent in patterns as well as the aesthetics of the patterns. Second, traditional patterns have been recognized as old fashioned to consumers because they have been often used for traditional handicrafts or folk products. If their unique shapes are changed or simplified, emphasizing images, and trend styles and colors are used, they will be recreated as a modem design. Third, textile designs using traditional patterns may provide various images and visual effects according to techniques and production methods. Then, the method will be applied to many items. Finally, since traditional patterns in fashion cultural products can be used as our unique design elements, they can be utilized as the source of design inspiration for the development of value-added products.