• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.17-21
• /
• 2016

Pt@Cu/C core-shell catalysts were successfully prepared by impregnation of a carbon support with copper precursor, followed by transmetallation between platinum and copper. The Pt@Cu/C core-shell catalysts retained a core of copper with a platinum surface. The prepared catalysts were used for hydrogen production through catalytic dehydrogenation of decalin for eventual application to an onboard hydrogen supply system. Pt@Cu/C core-shell catalysts were more efficient at producing hydrogen via decalin dehydrogenation than Pt/C catalysts containing the same amount of platinum. Supported core-shell catalysts utilized platinum highly efficiently, and accordingly, are lower-cost than existing platinum catalysts. The combination of impregnation and transmetallation is a promising approach for preparation of Pt@Cu/C core-shell catalysts.

• The Korean Journal of Pharmacology
• /
• v.20 no.1 s.34
• /
• pp.47-54
• /
• 1984

Effect of ascorbic acid on various hepatic ethanol metabolizing enzymes including alcohol dehydrogenase(ADH), the microsomal . ethanol oxidizing system(MEOS), and catalase was quantitatively evaluated in liver microsomal and cytosolic preparation from Sprague-Dowley rats. In present study, ADH activities were no changed significantly by ascorbic acid. The MEOS activity, dependent on NADPH and $O_2$, was affected by azide (inhibitor of catalase) or exogenous catalase. In the presence of ascorbic acid, ethanol oxidation by rat liver microsomal preparation reacted with NADPH-generating system was increased by up to 22.5%, but decreased when liver microsome was reacted with $H_2O_2$ generated by xanthine and xanthine oxidase. Increase in the activity of the MEOS in the presence of ascorbic acid was greater in liver microsomal preparation pretreated with azide. Also ascorbic acid oxidized ethanol nonenzymatically. This ethanol oxidation induced by ascorbic acid was inhibited by OH radical scavengers (thiourea, sodium benzoate), but was not much affected by superoxide dismutase. From these results it was suggested that ascorbic acidcould interact directly with the MEOS, then promote the oxidation of ethanol. And, to some extent, ${\cdot}OH$-radicals or other radicals generated during the spontaneous autooxidation of ascorbic acid may be responsible for the production of acetaldehyde from ethanol.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.185-193
• /
• 2004

A catalyst with CuO ceramic filter for simultaneous treatment of dust and HAP was prepared and characterized. Catalytic ceramic filter can not only potentially achieve the substantial savings in energy but provide with effective optimization and integration of process for simultaneous removal of SO$_2$, NO$_{x}$ and particulates from flue gases. Catalytic ceramic filters remove simultaneously particulates on exterior surface of filters and reduce NO to $N_2$ and $H_2O$ by SCR (Selective Catalytic Reduction) process. Preparation of catalyst impregnated ceramic filter with disk shape (Ψ 50) follow the processing of alumino-silicate ceramic filter, support impregnation and catalyst impregnation (copper oxide). Preparation routes of alumino-silicate catalyst carrier suitable for production of catalytic filters practically were studied and developed using the sol-gel and colloidal processing, homogeneous precipitation and impregnation method. Characterization of the catalyst, catalyst carrier catalytic filter materials have been performed the using various techniques such as BET, XRD, TGA, SEM. Combination of the sol-gel and colloidal processing and impregnation method is recommended to prepare catalyst carriers economically for catalytic filter applications.s.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.169-179
• /
• 2005

Porous materials are useful in a wide range of applications including bio/electronic products. The preparation and processing of these materials are mainly progressed by using an organic solvent, which gives rise to air pollution by its emissions. Alternatively, supercritical fluids are well suited to the production of functional porous materials due to a number of specific physical, chemical, and toxicological advantages. In this review, we will introduce the preparation and processing techniques for the formation of the nano/macro pore structure and their morphology, which can be controled by using supercritical fluids.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.1
• /
• pp.77-84
• /
• 1999

The purpose of this study is to establish a rapid preparation method of Dongchimi-juice having favor-able flavor and high antibacterial activity against undesirable bacteria in Naengmyon-broth by using high antibacterial strains of lactic acid bacteria Lactobacillus homohiochii B21 and leuconostoc mesenteroid-es subsp. mesenteroides C16 as Dongchimi starter. When the two strains of lactic acid bacteria were used as starter mixed culture was better than single culture in acid production and antibacterial activity. When starter was not inoculated in Dongchimi fermentation the numbers of Gram negatives and colifor-ms were remarkably increased in early phase and antibacterial activity could scarcely be detected. But when starter was inoculated the numbers of Gram negatives and coliforms were sharply decreased from early phase and antibacterial ctivity was high. When Dongchimi was made with heat sterilized mat-erials and starter there were no Gram negatives and coliforms and antibacterial activity was high. The antibacterial activity of starter inoculated Dongchimi was maximum in 2 days of fermentation at 2$0^{\circ}C$ and was scarcely detected in six days. In consideration of coliform counts antibacterial activity and the flavor of Dongchimi the preparation method in which all materials were heat treated at 8$0^{\circ}C$ for 15 min-utes and inoculated with mixed starter of the two strains and fermented for 2 days at 2$0^{\circ}C$ was thoug-ht to be good.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.952-956
• /
• 1998

An automated system was developed for the routine preparation of carbon-11 ($^11C$) labeled radiopharmaceuticals, which consisted of three major parts including [$^11C$]methylation of the precursor with [$^11C$] iodomethane ($[^11C]CH_3I)$, purification of the desired product and formulation of the final $^11C$ labeled radiopharmaceutical. The whole system included seven three-way slider valves, eleven solenoid valves, four pneumatic cylinders, a HPLC (High Performance Liquid Chromatography) system and a rotary evaporator. Using this system, we investigated the radiochemical synthesis of L-[$methyl-^11C$]methionine, which is the most widely used amino acid in tumor PET (Positron Emission Tomography) studies. The overall operation took 3035 min including the production of $[^11C]CH_3I$ (10.5 min) and decay-corrected radiochemical yield was 25%. The automated system we described herein can be widely utilized for the preparation of many $^11C$ labeled radiopharinaceuticals and has been shown to be efficient, reliable and easy to operate.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.63-71
• /
• 1962

This work was to develope a more simple producing method of mulberry seedling with lower cost than the normal grafting method and the conclusions were found as; 1. There was no difference for the production of the seedling root when the young mulberry branch was graved in soil at the time it grown as 60∼80cm height. 2. It was found that the best result was obtained in case of 15 to 20 young branches of a mulberry shoot were graved instead of whole of them. 3. The seedling root quality of the clay soil graved was found better than the sand soil used, but root producing quantity was found as the same. 4. The fertilizing at the time of the young branch graving was not effective and also the continual fertilizing seemed not to be effective. 5. The seedlings root production was found that Kairyo Nezumigaeshi was best and Ichihei, Suwon Daeyop, Shimano-Uchi, Suwon No.3 and Suwon No.4 were followed of it. But Rosoh was found as poor. Morus alba L. was found as a better Species than Morus Lhou(Ser) Koidz and Morus bombycis Koidz for the production of the seedling root and its quality.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.118-126
• /
• 2003

Digital Manufacturing is a technology facilitating effective developments and agile productions of the product via digital computer models representing physical and logical schema and the behavior of the real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a digital factory as a well-designed and an integrated environment is essential. In this paper, we constructed the sophisticated digital factory of a Korean automotive company's body shop, and conducted precise simulations of unit cell, lines and the whole factory for the collision check, the production flow analysis and the off-line programming. We expect that this digital factory of the body shop helps us achieve great savings in time and cost for many manufacturing preparation activities of the new car development.