• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.336-343
• /
• 1996

We have studied the preparation and the properties of $Ba_{1-x}$Sr$_{x}$TiO$_{3}$(BST) thin films by using the sol-gel method. Through the comparison of the effects of various solvents and additives in making solutions, we establish the production method of the stable solution which generates the high quality of BST film. We also set up the heat-treatment conditions for depositing the BST thin film through the TGA and XRD analyses. Through the comparison of the surface conditions of BST films deposited on Pt/Ta/SiO$_{2}$/Si and Pt/Ti/SiO$_{2}$/Si substrates, we find that Ta is more efficient diffusion barrier of Si than Ti so that Ta layer prevents the formation of hillocks. We fabricate the planar type capacitor and measure the dielectric properties of the BST thin film deposited on the Pt/Ta/SiO$_{2}$/Si substrate. Dielectric constant and dielectric loss tangent at 1V, 10kHz, and leakage current density at 3V of the BST thin film are 339, 0.052 and 13.3.mu.A/cm$^{2}$, respectively.ely.

• 약학회지
• /
• 제49권1호
• /
• pp.1-5
• /
• 2005

Near-infrared (NIR) spectroscopy has been widely applied in various field, since it is nondestructive and no sample preparation is required. In this paper, NIR spectroscopy was used for the determination of naproxen in a commercial pharmaceutical preparation. NIR spectroscopy was used to determine the content of naproxen in intact naproxen tablets containing 250 mg ($65.8\%$ nominal concentration) by collecting NIR spectra in the range of $1100{\sim}1750nm$. The laboratory-made samples had $46.1{\sim}85.5\%$ nominal naproxen concentration. The measurements were made by reflection using a fiber-optic probe and calibration was carried out by partial least square regression (PLSR). Model validation was performed by randomly splitting the data set into calibration and validation data set (63 samples as a calibration data set and 42 samples as a validation data set). The developed NIR calibration gave results comparable to the known values of tablets in a laboratorial manufacturing process with standard error of calibration (SEC) and standard error of prediction (SEP) of $1.06\%\;and\;1.04\%$, respectively. The NIR method showed good accuracy and repeatability. NIR spectroscopic determination in intact tablets allowed the potential use of real time monitoring for a running production process.

• Journal of Microbiology and Biotechnology
• /
• 제18권7호
• /
• pp.1335-1341
• /
• 2008

The cell wall material from fruiting bodies of Laetporus sulphureus has been suggested as a new alternative to mutan for the mutanase induction in Trichoderma harzianum. Structural analyses revealed that the cell wall fraction from this polypore fungus contained 56.3% of (1$\rightarrow$3)-linked $\alpha$-glucans. When the strain T. harzianum F-340 was grown on a cell wall preparation from L. sulphureus, the maximal enzyme productivity obtained after 3 days of cultivation was 0.71 U/ml. This yield was about 1.8-fold higher than that achieved on mutan, known so far as the best, but expensive and inaccessible, inducer of mutanase production. Cell-wall-induced mutanase showed a high hydrolytic potential in reaction with a dextranase-pretreated mutan, where maximal degrees of saccharification and solubilization of this biopolymer (80% and 100%, respectively) were reached in 3 h at 45$^{\circ}C$. The mutanase preparation was also effective in degradation of streptococcal mutan and its removal from oral biofilms, especially in a mixture with dextranase.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.131-139
• /
• 2018

The preparation of repeatable and uniformly reconstituted soil specimens up to the specified conditions is an essential requirement for the laboratory tests. In this study for large samples replication, the simultaneous usage of the traveling pluviation and curtain raining technique is used to develop a new method, called the curtain travelling pluviator (CTP). This simple and cost effective system is based on the air pluviation approach, whilst reducing the sample production time, can reproduce uniform samples with relative densities ranging from 25% to 96%. In order to investigate the resulting suitability and uniformity from the proposed method, a series of tests is performed. The effect of curtain traveling velocity, curtain width, drop height, and flow rate on the parameters of the sample is thoroughly investigated. Increase in the curtain velocity and drop height leads to the increase in relative density for the sand specimen. Increase in curtain width typically resulted in the reduction of relative density. Test results reveal that the terminal drop height for the sand specimen in this study is more than 500 mm. Relative density contour lines are presented that can be utilized in optimizing the drop height and curtain width parameters. Sample uniformity in the vertical and horizontal orientation is investigated through the sampling containers. Increasing relative density tends to result in the higher sample repeatability and uniformity.

• 한국미생물·생명공학회지
• /
• 제49권3호
• /
• pp.320-328
• /
• 2021

High GABA-enriched yeast extract, for various nutritionally and pharmaceutically important functional foods, was prepared using a novel isolate of Debaryomyces hansenii JBCC541. Under optimized conditions, GABA conversion rates are significantly enhanced up to 7.55 g/l by D. hansenii JBCC541, increasing their synthesis yield 40 times. The total amino acid content of the prepared yeast extract was 10733.86 mg/l (257.36 mg/g), consisting of alanine, lysine, glutamine, leucine, and valine as the primary amino acids. The GABA content was significantly enhanced up to 6790 mg/l (162.80 mg/g) in the presence of glutamic acid, with approximately 10-fold higher GABA production. Flavor amino acids were also highly enhanced, indicating that the prepared yeast extract might be useful for preparing various functional and sensuous foods. Our results were promising as a GABA-enriched yeast extract preparation tool ensuring a suitable food material level with the potential for functionally enhanced food industrial applications.

• 한국균학회지
• /
• 제16권3호
• /
• pp.128-134
• /
• 1988

Lyophyllum decastes의 발효사료 제조를 위한 cellulase 생산은 $30^{\circ}C$, pH 6.0, 수분 $60{\sim}70%$ 범위에서 I5일간 배양하는 것이 좋았다. 부원료로 미강 $30{\sim}40%$와 $(NH_4)_2HOP_4$ 0.72%를 첨가하고 볏짚을 4% alkaline peroxide로 전처리하면 cellulase 생산은 증가하였다. 볏짚에 Lyophyllum decastes를 40일간 발효시켰을 때 lignin은 19.9% 분해되있고 총질소는 대조구의 1. 1%에서 1.6%로 증가되었다. 발효가 진행됨에 따라 볏짚의 in vitro 소화율은 증가하여 35일 발효 후에는 대조구에 비하여 21. 1%증가하였다.

• 대한방사성의약품학회지
• /
• 제8권2호
• /
• pp.71-76
• /
• 2022

Indigenous diagnostic dose of ¹³¹I-labeled meta-iodobenzylguanidine ([¹³¹I]mIBG) was prepared via Cu⁺ catalyzed isotope exchange reaction generated in situ by sodium metabisulfite for imaging of neuroblastoma tumor. [¹³¹I]mIBG was produced in overall 85-90% radiochemical yield. The average amount of radioactivity of [¹³¹I]mIBG was 2164 MBq (1998-2331MBq) with an average specific activity > 1000 MBq/mg at the end of synthesis. The radiochemical purity was ≥ 99.9% after purification through Dowex-1 × 8 ion exchange resin (100-150 mesh) at the date of preparation. The stability of [¹³¹I]mIBG at concentration 480-555 MBq/mL was > 97% at 4 ℃ after 4 days. The room temperature (25 ℃) stability of [¹³¹I]mIBG was > 98% after 24 h. Biodistribution of [¹³¹I]mIBG in patient showed uptake in salivary glands, liver, spleen and excreted though urinary bladder. Neuroendocrine medicated uptake into tumor lesion and metastatic sites were noted which strongly correlate with the morphological abnormalities of patient.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.979-986
• /
• 2014

This study establishes basic data for operations management by organizing processes and measuring time in the mini line for female jackets to improve productivity, ensure competitiveness, and maintain operator competency and the line process flow balance between apparel manufacturing companies. The results of this study are as follows. Sewing operations are divided into preparation functions, arrangement, partial tasks, and assembly that consist of 84 processes. The results from time measurement indicate that 3238.41seconds (sec) were required to produce a single jacket and that the average time required for operators was 231.32 sec. A control limit was established to increase the reliability of the measured value for net time. After outside values were removed, the operation time was measured to be 3176.35 sec. This accounted for 98.08% of the total operation time, with net time decreasing by 62.06. Skill and effort level coefficients were applied to measure the operator performance, the total real time was calculated to be 3415. The requirement for preparation and arrangement operations were 1233.35 sec, and 2182.22 sec for partial tasks and assembly operations. Process separation and organization were performed after the bottleneck operation was selected to identify the maximum line balance. Consequently, process efficiency of preparation and arrangement operations increased from 79.19% to 93.00%, and the partial tasks and assembly operations increased from 62.36% to 90.93%.

• Journal of Microbiology and Biotechnology
• /
• 제28권1호
• /
• pp.1-11
• /
• 2018

An antioxidant peptide derived from Pinctada fucata meat using an Alcalase2.4L enzymatic hydrolysis method (named AOP) and identified by LC-TOF-MS has promising clinical potential for generating cosmetic products that protect skin from sunshine. To date, there have been few published studies investigating the structure-activity relationship in these peptides. To prepare antioxidant peptides better and improve their stability, the design and expression of an antioxidant peptide from Pinctada fucata (named DSAOP) was studied. The peptide contains a common precursor of an expression vector containing an ${\alpha}$-helix tandemly linked according to the BamHI restriction sites. The DNA fragments encoding DSAOP were synthesized and subcloned into the expression vector pET-30a (+), and the peptide was expressed mostly as soluble protein in recombinant Escherichia coli. Meanwhile, the DPPH radical scavenging activity, superoxide radical scavenging activity, and hydroxyl radical scavenging activity of DSAOP $IC_{50}$ values were $0.136{\pm}0.006$, $0.625{\pm}0.025$, and $0.306{\pm}0.015mg/ml$, respectively, with 2-fold higher DPPH radical scavenging activity compared with chemosynthesized AOP (p < 0.05), as well as higher superoxide radical scavenging activity compared with natural AOP (p < 0.05). This preparation method was at the international advanced level. Furthermore, pilot-scale production results showed that DSAOP was expressed successfully in fermenter cultures, which indicated that the design strategy and expression methods would be useful for obtaining substantial amounts of stable peptides at low costs. These results showed that DSAOP produced with recombinant Escherichia coli could be useful in cosmetic skin care products, health foods, and pharmaceuticals.

• Carbon letters
• /
• 제9권3호
• /
• pp.203-209
• /
• 2008

The objective of this work is to study the feasibility of the preparation of the activated carbon (AC) from coconut tree flowers using high temperature fluidized bed reactor (HTFBR). The activating agent used in this work is steam. The reactor was operated at various activation temperature (650, 700, 750, 800 and $850^{\circ}C$) and activation time (30, 60, 120 and 240 min) for the production of AC from coconut tree flowers. Effect of activation time and activation temperature on the quality of the AC preparation was observed. Prepared AC was characterized in-terms of iodine number, methylene blue number, methyl violet number, ethylene glycol mono ethyl ether (EGME) surface area and SEM photographs. The best quality of AC from coconut tree flowers (CFC) was obtained at an activation temperature and time of $850^{\circ}C$ and 1 hr restectively. The effectiveness of carbon prepared from coconut tree flowers in adsorbing crystal violet from aqueous solution has been studied as a function of agitation time, carbon dosage, and pH. The adsorption of crystal violet onto AC followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity $q_m$ was 277.78 mg/g., equilibrium time was found to be 180 min. This adsorbent from coconut tree flowers was found to be effective for the removal of CV dye.