• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.197-199
• /
• 2003

In this work, the Greitzer's B-parameter model is applied for analyzing the stall and surge characteristics. The four parameters in the model are highlighted in order to establish the influence of each parameter on the system. First of all, the governing equations of stall and surge behavior are solved numerically using fourth-order Runge-Kutta method. The Taguchi method is then used to analyze the results generated to obtain the extent of effects of the parameters on the system by varying the parameters in a series of combinations. Finally, a thorough analysis is carried out on the results generated from the Taguchi method and the graphs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.180.2-180.2
• /
• 2010

The purpose of this research is to analyze the sensitivity of WindSIM in complex terrain. As the flat areas for wind turbine installation become scarce globally, it becomes inevitable to install wind turbines in complex terrain. In order to predict annual energy production (AEP) in a more precise manner in complex terrain, it is of great importance to conduct such research. Three parameters: reference velocity, roughness and resolution have been chosen to see to which parameter WindSIM was the most sensitive in terms of annual energy production in complex terrain. By fixing two parameters and setting one parameter as a variable, it could be easily found that how annual energy production was effected by the change in each parameter.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.87-96
• /
• 2019

Purpose: The purpose of this paper is to determine an optimal production time for economic production quantity model with preventive maintenance and random defective rate as the function of a machinery deteriorates. Methods: If a machinery shifts from "in-control" state to "out-of-control" state, a proportion of defective items being produced increases. It is assumed that time to state shift is a random variable and follows an arbitrary distribution. The elapsed time until process shift decreases stochastically as a production cycle repeats and quasi-renewal process is used to implement for production facilities to deteriorate. Results: When the exponential parameter for exponential distribution increases, the optimal production time increases. When Weibull distribution is considered, the optimal production time is closely affected by the shape parameter of Weibull distribution. Conclusion: A mathematical model is suggested to find optimal production time and optimal number of production cycles and numerical examples are implemented to validate the patterns for changes of optimal times under different parameters assumptions. The real application is implemented using the proposed approach.

• 한국주조공학회지
• /
• 제11권1호
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.381-386
• /
• 1987

By the speech production model, the first positive peak in a pitch interval of the voiced speech is mainly affected by the glottis and the first formant component, known as a typical energy source of the voiced speech. From these characteristics, the energy parameter can be replaced by the area of the area of the positve peak in a pitch interval, which parameter is generally used for classification of speech signals. In this method, the changed energy parameter is independent of window length applied for analysis, and the pitch can be extracted smultaneously. Furthermore, the energy can be extracted in the pitch period unit.

• Advances in materials Research
• /
• 제13권1호
• /
• pp.1-18
• /
• 2024

The present experimental investigation focuses on finding optimal parametric data-set of laser micro-drilling operation with minimum taper and Heat-affected zone during laser micro-drilling of Carbon Nanotube/Epoxy-based composite materials. Experiments have been conducted as per Box-Behnken design (BBD) techniques considering cutting speed, lamp current, pulse frequency and air pressure as input process parameters. Then, the relationship between control parameters and output responses is developed using second-order nonlinear regression models. The analysis of variance test has also been performed to check the adequacy of the developed mathematical model. Using the Response Surface Methodology (RSM) and an Accelerated particle swarm optimization (APSO) technique, optimum process parameters are evaluated and compared. Moreover, confirmation tests are conducted with the optimal parameter settings obtained from RSM and APSO and improvement in performance parameter is noticed in each case. The optimal process parameter setting obtained from predictive RSM based APSO techniques are speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), Air pressure (1 kg/cm²) for Taper and speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), air pressure (3 kg/cm²) for HAZ. From the confirmatory experimental result, it is observed that the APSO metaheuristic algorithm performs efficiently for optimizing the responses during laser micro-drilling process of nanocomposites both in individual and multi-objective optimization.

• Kyungpook Mathematical Journal
• /
• 제19권1호
• /
• pp.135-139
• /
• 1979

We consider the problem that how must the production of certain item vary as a function of time, if for known losses due to depreciation the total amount of the product is to have a constant value. The integral equation associated with the problem is solved by an appeal to the convolution quotients. The production function comes out to be an expression containing the generalized Laguerre polynomials. The loss function and the production function are tabulated for different values of the parameter by using an IBM 370/145 computer.

• 지역연구
• /
• 제12권2호
• /
• pp.21-36
• /
• 1996

This thesis focused on the extent of the area-by-area gap of the unit production cost that should be taken into account without exception in supply of the local public goods production cost. With the advent of the local autonomy era, what should be considered in the local governmen's production of the local public goods are the government's fiscal capacity and the environmental difference that shows up in accordance with the area's characteristics. Though with the same level of the fiscal capacity, an occurrence of environmental difference will lead inevitably to the different level of actual supply of the local public goods. The method of analysis used in this thesis was first to bring out implicit price, to combine this with induced expenditure function, to separate demand function parameter and cost function parameter, and then to analyzed the impact of environmental variables on the production cost. The environmental variables were set on the basis of the ones that affected expenditure per person of the public goods. The analysis was conducted in distinction of city areas and county areas. The results showed that, in cases of cities, more production cost of the public goods was in presence in urban areas and in areas where there was sluggish development. In other words, distinction could be drawn between areas where there was a large consumption of production cost resulting from poor environmental sparked by slow development and those where additional costs were required due to population concentration caused by a certain level of accomplished development. In the meantime, in cases of county areas, the results were around the same. However, a comparison between city areas and county ones told that overall difference between city areas was not that big in the production cost while that in county areas was large enough. In times ahead, in implementation of grant-in-aid scheme, production cost index for local public goods could be used as it was written in consideration of environmental characteristics of areas concerned.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.181-184
• /
• 2000

The cooling rate of a bioreactor was measured to estimate the heat generation by microbial cultivation production. The estimated heat production was calculated from the varying temperature of cooling water. It was used for monitoring growth and specific metabolic events for microbial cultivations. Metabolic heat measured was also adopted for a control parameter for fed-batch cultivation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.15-17
• /
• 2005

Recently genetic algorithm techniques have widely used in adaptive and control schemes for production systems. However, generally it costs a lot of time for learning in the case applied in control system. Furthermore, the physical meaning of genetic algorithm constructed as a result is not obvious. And this method has been used as a learning algorithm to estimate the parameter of a genetic algorithm used for identification of the process dynamics of nonlinear IIR filter and it was shown that this method offered superior capability over the genetic algorithm. A genetic algorithm is used to solve the parameter identification problem for linear and nonlinear digital filters. This paper goal estimate nonlinear IIR filter parameter using the genetic algorithm.