• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.75-81
• /
• 2016

By using simulation, fixed location production method and flow production method have been compared to improve the productivity of deckhouse preceding outfitting process. In this paper, we analyze that the suggested flow production system instead of fixed location production can improve productivity. In current preceding outfit production system which adopts fixed location production, where a block occupies an area and does not move until the work finishes. On the other hand, in improved flow production system, the block moves instead of workers and equipment. Though the output of two systems are almost the same when we did not consider the moving time and waiting time of blocks, the flow production will be better when the variability of task time will be reduced.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.04a
• /
• pp.57-66
• /
• 2000

Production-distribution planning is the most important part in supply chain management (SCM). To solve this planning problem, either analytic or simulation approach has been developed. However these two approaches have their own demerits in problem solving. In this paper, we propose a hybrid approach which is a specific problem solving procedure combining analytic and simulation method to solve production-distribution problems in supply chain. The machine capacity and distribution capacity constraints in the analytic model are considered as stochastic factors and adjusted by the proposed specific process according to the results from independently developed simulation model which includes general production-distribution characteristics.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.389-392
• /
• 2002

Local Mechanical work is researched which spending unnecessary labors and time due to unnecessary material accumulation and fabricated on site. Accordingly, this study analyzes the work process of mechanical equipments by Lean Production principles. Value Stream Analysis(VSA) uncovers waste factor of the existing method and manufactory production method using Value Stream Mapping(VSM). In the results, this study presents improvement of the existing method problems and negative factors of manufactory production.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.12
• /
• pp.1250-1256
• /
• 2011

In this study, Bacillus licheniformis cells were immobilized by entrapment in calcium alginate beads and were used for production of alkaline protease by repeated batch process. In order to increase the stability of the beads, the immobilization procedure was optimized by statistical full factorial method, by which three factors including alginate type, calcium chloride concentration, and agitation speed were studied. Optimization of the enzyme production medium, by the Taguchi method, was also studied. The obtained results showed that optimization of the cell immobilization procedure and medium constituents significantly enhanced the production of alkaline protease. In comparison with the free-cell culture in pre-optimized medium, about 7.3-fold higher productivity was resulted after optimization of the overall procedure. Repeated batch mode of operation, using optimized conditions, resulted in continuous production of the alkaline protease for 13 batches in 19 days.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.359-365
• /
• 2003

This paper describes the on-line readymixed concrete production system using CAN network, which is a leading industrial control network. The CAN network interface circuits for moisture sensor and load cell sensor we designed for CAN network of readymixed concrete production system, respectively, and also the method for networking 2-states devices such as limit switch and lamp is suggested. The operating status of a overall remicon production system is monitored, and also the system is controlled with host computer through the network. The CAN network interface method is applied to the real readymixed concrete production system to verify the performance of proposed method.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.47-52
• /
• 1999

In this paper we propose new approximate method for the performance analysis of closed-loop production system with unreliable machines and random processing times. The approximate method decomposes the production system consisting of K machines into a set of K subsystems, each subsystem consisting of two machines separated by a finite buffer. Then, each subsystem is analyzed by analyzing method n isolation. The population constraint of the closed-loop production system is taken into account by prescribing that the sum of average buffer level in the subsystems is equal to the number of customers in the closed-loop production system,. We establish a set of equations that characterizes unknown parameters of the servers in the subsystems. An iterative procedure is then used to determine the unknown parameters. Experimental results show that these methods provide a good estimation of the throughput.

• Archives of design research
• /
• v.14 no.4
• /
• pp.157-165
• /
• 2001

The method to make ceramic pigments for 4 colour instead of ink in the process of the of set-printing and put them on the decal paper in the ceramic industry has been used to produce complicated images such as photographs or famous masterpieces. Offset-printing which is the production method for mass production, had enough worth to suffer the past high price of the production line. But today it is not suitable for the production method of small quantity and many kinds corresponding to needs for the various tastes and designs of consumers. Therefore I will put 4 colour printing method on the silkscreen, handiwork, suitable for the production method for small quantities and many variations to develop the methods that permit to cost effectively reproduce complex, high resolution, multicolor images. The study is expected to give value to ceramists who do various works and to be offered as the foundation in the field of design and expression.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.12
• /
• pp.839-847
• /
• 1987

The probabilistic production cost is calculated by the Expected Incremental Generation Cost Curve(EIGC) method based on the multi-state and multi-block operating conditions. For this, A new algorithm for determining production cost by the EIGC and the generation availability curve (GAC) had been developed in order to realize better economic olad dispatch and better reliability for power system operation. The simpler method for determining the EIGC and the GAC is proposed for convenience and saving in computation time.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.59-67
• /
• 2004

A universal plasma-chemical module (PChM) for the industrial processing of different hydrocarbon raw material pyrolysis was designed and tested. Laboratory investigations for the plasma-chemical method of acetylene production from natural gas and different coals were made. Similar laboratory tests on the industrial production of acetylene as a raw material for organic syn-thesis were developed using the PChM. A comparison of the suggested plasma-chemical method with the traditional process of acetylene production were carried out. The outlook of the plasma-chemical method was shown.

• Journal of the Korean Professional Engineers Association
• /
• v.10 no.3
• /
• pp.17-26
• /
• 1977

In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.