• 한국의상디자인학회지
• /
• 제20권3호
• /
• pp.115-128
• /
• 2018

The purpose of this study is to systematize various clothing production methods that domestic fashion brands are utilizing to produce fashion products, and to propose effective clothing production methods according to the characteristics. The research methods are contents analysis method of the literatures, articles, reports, and interviewing method of the practitioners who are in charge of the production of fashion. First, the clothing production methods of the domestic fashion brands are categorized as follows. It is divided into a fashion brand management method and a promotion company entrustment method based on who carries out the clothing production and management. The fashion brand management method is subdivided into the 'rental-production', 'CMT', and 'self-production' methods. All three methods are performed at domestic and global sourcing, but the CMT method is more utilized at the global sourcing. The promotion company entrustment method is subdivided into the 'full consignment production method', the 'CMT method involving promotion company', and 'direct buying method by promotion company'. All methods are performed at domestic and global sourcing. Second, the results of reviewing effective clothing production methods, according to characteristics are as follows. If fashion brands control the production and management, they use all three fashion brand management methods. The fashion brands use the promotion company entrustment method when they wants to offer special products, or the number of items is large, or the production management is difficult, or the manpower and equipment size is reduced. The domestic sourcing is utilized by fashion brands and promotion companies when production management is required for high quality apparel production, in case of trendy and complex designs, spot production, and in small quantity production. The global sourcing is utilized by fashion brands and promotion companies when it comes to lowering the production cost, fashion brands preferred the mass production of apparel with design that can be pre-planned.

• Journal of the korean society of oceanography
• /
• 제39권3호
• /
• pp.186-196
• /
• 2004

Since seagrasses are highly productive and provide a source of organic carbon for a wide variety of marine organisms in coastal and estuarine ecosystem, accurate assessment of seagrass production is critical to understand the functions and values of seagrasses in these ecosystems. Zieman's leaf marking technique has been mostly used to estimate seagrass leaf production rates. However, inherent problems on the traditional leaf marking technique have been discussed by the several researchers, and these problems can cause underestimation of seagrass production. To develop an accurate and reliable assessing method for seagrass production, production rates of eelgrass, Zostera marina in three bay systems on the south coast of the Korean peninsula were estimated using the conventional leaf marking technique and the plastochrone method. The plastochrone method has been recently suggested as an effective method for reliable assessments of seagrass production. In the present study, leaf production rates estimated by the plastochrone method were significantly higher than the rates derived from the traditional leaf marking technique. Annual eelgrass leaf production assessed using the leaf marking technique was about 65 to 89% of the estimated production using the plastochrone method. The differences in annual productions between assessment techniques imply that the conventional leaf marking technique significantly underestimated eelgrass leaf production. Total eelgrass productions estimated using the plastochrone method in the present study sites were about 600 to 806 g DW $m^{-2} y^{-l}$, and below-ground production accounted for about 20 to 23% of the total production. The plastochrone method was suggested to be an effective and accurate assessing method for eelgrass production.

• 산업경영시스템학회지
• /
• 제3권3호
• /
• pp.59-66
• /
• 1980

The purpose of this paper to study on measuring method in technical progress. Technology is combination method of raw material and capital, land, labour. The first step to technical Progress is COBB-DOUGLAS production function, so technical progresses are important role in economic growth and development. General production function from Y=f(K, L, T) and COBB-DOUGLAS production function Y=${AK^I}{L^b}$ is first condition. Technical progress is saving of production factor In capital saving, labour saving, neutral saving. Marred Hicks Robinson has Insist on technical progress by each view of production factor, but, what is most excellent measuring method of technical progress\ulcorner I : productivity index method. II : Gross Production function method. Productivity method used in every products level in weight values, gross method function method used in production factor attributed to products. Above two measuring method has delicate problem in each input factor, substitution relation and production factor simultaneously linked each others This basic problem based on technical progress is not solubable in this time.

• Geomechanics and Engineering
• /
• 제32권5호
• /
• pp.503-512
• /
• 2023

In tunneling projects, a significant part of the costs is spent on segment production. By more economically producing, the cost of tunnel construction can be greatly reduced, especially in long and large-diameter tunnels. In the present study, the effect of using the Carousel method in the improvement of the production system performance compared to the conventional Static system has been studied. To carry out the research, a quantitative comparison of cost and production time was carried out for two production methods using the available documentation. The opinions of experts have been obtained using questionnaires and qualitative comparison of cost, time and production quality was done by implementation of statistical analysis. The SPSS software and the univariate t-test were used to analyze the questionnaires. According to the results of statistical analysis with SPSS, the use of the Carousel method will reduce production time and costs along with increasing manufacturing quality. According to the documentation analysis, the Carousel method reduces the cost of production by almost 30% and leads to a reduction of the production time to approximately 40% of the Static moulds system. The Carousel method has a higher production rate, efficiency, and better performance. Research into quantifying the benefits of Carousel method in the production system performance is very limited. This comparison is based on real information from the under construction Tabriz Metro project. This article can be very helpful in choosing the best production method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권2호
• /
• pp.165-168
• /
• 1991

The maternal weigh-suckle-weigh (WSW) method for estimating milk production of sows was further evaluated by comparing this to the traditional WSW method. Twenty one estimates of hourly milk production were obtained by both methods. Total hourly milk production between the two methods was not significantly different (292.4 vs 303.3 g/h, p > 0.05). Hourly milk production determined by the maternal WSW method was highly correlated with hourly milk production estimates using the traditional WSW method ($R_2$ = 0.94, p < 0.001). When corrections for metabolic and salivary losses were made, the milk production figures for the maternal WSW method were approximately 27% less than those estimated by the traditional WSW method.

• 가정과삶의질연구
• /
• 제7권1호
• /
• pp.43-57
• /
• 1989

In the materialistic societies, individuals get money return according to the importance of their roles. But unlike wage workers who are engaged in market production , housewives engaged in home production do not get that return. It is because the result of home production is not transacted in the market and the price is not given to it, so the value of home production is not estimated. Hence this study trcognizes again the value of home production, suggests the estimation methods of it in input and output based on home production systems and attempts to actualize those methods socially. This home production develops the human attributes of family members to act as a member of a society and potentially contributes to home income and Gross National Products, so it has social and economic value. In spite of that significance, the value of home production is not estimated, so its nor recognized and housewives engaged in home production are not acknowledged their ability. Hence based on home production systems form input to output, this study suggested opportunity cost method and market cost method in input, method by saving money expenditure, hybrid method and method by comparing with market in output.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.136-148
• /
• 1995

In this study, a model integration method is pressented as a new method for development of a parametric simulation model. This method enable us to integrate the special simulation models for each production subsystem into a large simulation model. Not only this large simulation model but also each special simulation model for each production subsytem can be used independently. Using this integration method man can reduce the development time and cost for simulation model development. To show the usefulness of this method, a simulation model for a production system with robots is developed by this model integration method. This simulation model is realized by the integration of two special simulation models, one model for a machining subsystem and the other model for a transport subsystem. The modeled production system consists of the robotic cells for machining and a transport subsystem which enable the material flow among the robotic cells. The flow of workpiece in each robotic cell is not fixed. All machines in a robotic cell are only served by robots.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.203-206
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.286-289
• /
• 2007

We have developed an automated circuit defect inspection and repair method that can be used to improve the yield ratio of TFT-LCD. The method focuses on correcting resist patterns after the development process to ensure shape regularity. We built a prototype system and confirmed that the method is valid.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.147-156
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.