• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2005.10a
• /
• pp.521-532
• /
• 2005

IT 기업의 기술적 효율성의 정도를 추정하고, 그 결정요인을 알아보기 위해 Coelli(1995)의 확률적프론티어(Stochastic Frontier model) 중 초월대수 변경생산함수(translog stochastic frontier production function)를 설정한다. 분석견과 연구개발투자, 기업의 재무구조, 설비투자효율, 노동소득분배율 등은 기업의 비효율을 감소시키는 역할을 하는 반면, 기업규모, 재고자산증가율, 자기자본증가율 등은 기업의 비효율성을 더 높여주는 것으로 나타났다. 1990년부터 2004년까지 국내 제조업 전체의 생산의 기술적 효율성은 평균 0.5311로 이는 생산효율성이 $53.11\%$임을 의미하고, 비효율성은 $46.89\%$에 달한다고 볼 수 있다. IT 기업의 기술적 효율성은 0.5337회 제조업과 비슷하지만, IT 대기업은 0.61, IT 중소기업은 0.511로 대기업과 중소기업의 격차가 크게 발생하고 있다.

• Environmental and Resource Economics Review
• /
• v.30 no.4
• /
• pp.557-579
• /
• 2021

Collective energy is an intermediate stage in energy conversion and has a great influence on the power structure as a distributed power source. However, the problem of the collective energy business has recently emerged due to the worsening profitability of some collective energy operators. This study measured the technical efficiency of major operators through the estimation of the production efficiency of Korean collective energy operators, and based on this, we looked at ways to improve the profit structure of operators. After collecting detailed data from 16 collective energy operators between 2016 and 2019, the production efficiency of operators was estimated using the panel stochastic frontier model. As a result of the estimation, combined steam power operators showed the highest production efficiency and reverse CHP operators showed the lowest efficiency. Furthermore, as a result of examining the factors influencing profitability, it was confirmed that production efficiency has a positive effect on overall profitability. However, businesses with a high proportion of heat production, such as small district electricity operators, profitability was lower. This phenomenon is due to the structural limitations of the current heat sales market. Hence, the adjustment of the heat sales unit price is necessary to improve profitability of collective energy operators.

• Interdisciplinary Bio Central
• /
• v.3 no.1
• /
• pp.4.1-4.7
• /
• 2011

Forty-seven wild accessions of Lotus japonicus Regal (Japanese trefoil) indigenous to Japan were investigated for nine morphological characters. Average temperature and annual precipitation were negatively correlated with stem color and seed weight. On the other hand, latitude was positively correlated with these traits. Consequently, accessions from sites at higher latitudes with low temperatures and precipitation tend to have dark red stems and heavy seeds. Cluster analysis based on nine morphological characters classified 47 wild accessions into six major groups. Cluster I included four accessions of tall and erect plants. These plants are phenotypically similar to commercial variety 'Empire'. Cluster II consisted of three accessions of creep plants with pale red stems. Cluster III contained 24 accessions that had average values for all morphological characters evaluated. Cluster IV included two accessions of erect plants with rounded leaflets and dark red stems. Cluster V included four accessions of small, creep plants with pale red stems. Cluster VI included seven accessions of small and erect plants, a phenotype that also applies to ?Gifu B-129?, which is used as experimental strain worldwide. These data were deposited into LegumeBase, an online database (http://www.legumebase.brc.miyazaki-u.ac.jp/) supported by the National BioResource Project (NBRP) in Japan.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.845-855
• /
• 2022

In response to climate change, the world is continuing efforts to reduce fossil fuels, expand renewable energy, and improve energy efficiency with the goal of achieving carbon neutrality. In particular, R&D is being made on the value chain covering the entire cycle of hydrogen production, storage, transportation, and utilization in order to shift the energy supply system to focus on hydrogen energy. Hydrogen-based energy sources can produce heat and electricity at the same time, so it is possible to utilize heat energy, which can increase overall efficiency. In this study, calculation of the optimal scale for hydrogen-based cogeneration and the composition of heat sources were reviewed. It refers to a method of the optimal heat source size according to the external heat supply and heat storage to be considered. The results of this study can be used as basic data for establishing a hydrogen-based energy supply model in the future.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.79-94
• /
• 2012

The purpose of this study is to investigate the production efficiencies of the Korean aquaculture fishery with respect to species and methods using a Data Envelopment Analysis. The study extracted the 8 fishes in each of the sea cage culture, aquarium basin, and enclosed aquaculture for the analytical purposes. First, the study estimated the technical, pure technical, and scale efficiencies of the total of 24 aquaculture fishes based on the traditional DEA under the assumptions of both CRS and VRS. 2 fishes were identified as the efficient DMUs under the CCR-model, and 6 fishes under the BCC-model. Second, we tested to see if there was any difference in production efficiencies regarding those three different methods of aquaculture. we could not find any evidence of the differences in efficiency using a rank sum test based on the traditional DEA. However, we could do find that the pure technical efficiency in the sea cage culture was lower than others at 1% level of significance and the pure technical efficiency in enclosed aquaculture was also lower than others at 5% level of significance using Bilateral-DEA, which could explicitly consider the heterogeneity in the 3 production methods of aquaculture. Finally, the study obtained the 95% confidence intervals of the efficiency scores for the 24 fishes under our study using the smoothed bootstraping method in the process of the re-sampling in cooperation with both a kernel density estimation and a reflection method. At the same time, we could estimate the bias-corrected efficiency scores while the traditionally estimated efficiency scores suffered from the biases in the process of solving a linear programming with the deterministic nature of a production frontier. And hence, we could distinguish the differences in production efficiencies of the 8 fishes with respect to those 3 methods of aquaculture.

• The Journal of Fisheries Business Administration
• /
• v.47 no.1
• /
• pp.63-86
• /
• 2016

The purpose of this study is to investigate production efficiency of Oceans and Fisheries Human Resources Development Programs Efficiency using Bootstrap-DEA. The study extracts 33 officials curriculum, 11 fisheries managers curriculum for its analytical. First, the study estimates technical, pure technical, and scale efficiency of each curriculums based on traditional DEA under the assumption of CRS and VRS. 8(official 7, managers 1) curriculums are identified as efficient DMUs under the CCR-model, and 13(official 10, managers 3) under the BCC-model. We provide inputs that allow inefficient curriculum to be efficient DMUs on a production frontier, and a reference set for their bench-marking. Second, rank test, Wilcoxon-Mann-Whitney test to find a statistical significance of heterogeneity existing in efficiences between Bootstrap-DEA tenical vs Bootstrap-DEA pure technical was no significant difference. We have identified that G10, 11, 12 13, 25, 31, 33, 39 curriculums are the most efficiently produced in the technical and pure technical efficiency. Also we managed to measure the inefficiency which exists in efficiently produced curriculums when estimating the bias corrected efficiency scores. In Technical efficiency, Operation and facility was significant at the 10%. In Pure technical efficiency, facility was significant at the 10%.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.63-87
• /
• 2010

The purpose of this paper is to measure the efficiency of Korean container terminals by using SFA(Stochastic Frontier Analysis). Inputs[Number of Employee, Quay Length, Container Terminal Area, Number of Gantry Crane], and output[TEU] are used for 3 years(2002,2003, and 2004) for 8 Korean container terminals by applying both SFA and DEA models. Empirical main results are as follows: First, Null hypothesis that technical inefficiency is not existed is rejected and in the trasnslog model, the estimate is significant. Second, time-series models show the significant results. Third, average technical efficiency of Korean container terminals are 73.49% in Cobb-Douglas model, and 79.04% in translog model. Fourth, to enhance the technical efficiency, Korean container terminals should increase the handling amount of TEUs. Fifth, both SFA and DEA models have the high Spearman ranking of correlation coefficients(84.45%). The main policy implication based on the findings of this study is that the manager of port investment and management of Ministry of Land, Transport and Maritime Affairs in Korea should introduce the SFA with DEA models for measuring the efficiency of Korean ports and terminals.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.19-35
• /
• 2018

This paper is to estimate the total factor productivity(TFP) in the Korean manufacturing and service industries during the period 1975:1-2016:4 using the stochastic frontier analysis model. In order to analyze the determinants for the total factor productivity the paper estimates the industry-specific determinant elasticities of TFP using the autoregressive distributed model. The industry-specific determinants, which reflect the industrial structure and properties include markup, the ratio of capital to labor(KL), and the ratio of foreign intermediate goods (FIG) to industrial output. The average value for total factor productivity growth was estimated to be 0.0199 in manufacturing and 0.0063 in the service industry. The markup and KL elasticities of TFP were estimated to be 2.481 and 0.651 in manufacturing respectively and -1.403 and 0.042 in the service industry respectively. The empirical results suggest that the industrial markup and the ratio of capital to labor have had decisive effects on the changes in the total factor productivity in the Korean manufacturing and service industries during the period 1975:1-2016:4.