• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• 미생물학회지
• /
• 제41권2호
• /
• pp.130-134
• /
• 2005

Monascus purpureus KCCM 60016을 이용하여 다량의 색소생산 변이주를 개발하고 생산조건에 대하여 조사하였다. 자외선 조사로 M. purpureus KCCM 60016으로부터 돌연변이를 유도한 결과, 색소생성이 우수한 P-57 변이주를 분리하였다. 분리된 P-57 변이주는 고체 배양에서 현미를 기질로 했을 때 색소생성이 가장 우수한 것으로 나타났으며, 색소생성의 최적 배양조건은 배양온도 $30^{\circ}C,\;90\%$의 배양습도에서 30일간 배양이 가장 우수했다. 이상의 조건에서 배양한 적색색소, 오렌지색소와 황색색소의 양은 각각 160.0 unit, 193.6 unit와 141.6 units-나타났다.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.525-530
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6％, 98.8％ and 97.6％ respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.

• 복식문화연구
• /
• 제15권4호
• /
• pp.702-712
• /
• 2007

The purpose of this study was to understand the current trend with regard to the material of jeans and the making method of jeans pattern and the characteristics of washing processing through the overall production status of jeans in casual brands and to offer the basic data for producing the high efficient jeans. The results were as follows. According to the survey of production status of jeans in casual brands, the fabric mixture was highest in the order of non-stretch denim 100% cotton, stretch denim cotton/spandex mix and denim with $1{\sim}2%$ weft direction spandex mix. The most frequently used processing method for denim was in the order of normal finishing, mercerization finishing, soft finishing and pigment finishing. The most frequently used method of washing finishing for jeans was in the order of forming by embossing washing, bio stone washing, normal washing, bio washing, and bio stone bleach washing. The average shrinkage was higher on waist circumference and pants length of warp direction rather than hips circumference, thigh circumference, hem circumference of weft direction.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.523-533
• /
• 2020

Previous studies are used to examine cellulose content, degumming period, fiber quality, production yield, production cost, development limit of fiber according to physical, chemical, and microbial degumming methods. Three types of degumming methods are used to measure surface condition after degumming, necessity of additional degumming and degree of impurity removal. First, previous studies confirmed that the microbial degumming method is superior in terms of cellulose content, fiber quality, production yield, production cost, and fiber development possibility. Second, surface condition and the necessity of additional degumming were analyzed by SEM. The black skin binding material was removed in the case of the Sangnangyi and chemical degumming; however, it was insufficient and further degumming was required. Skin fiber binding material was removed in the case of microbial degumming and the surface was cleanest after degumming; in addition, most showed the form of yarn decomposition. The FT-IR spectrum determined the degree of removal of impurities and showed that it can utilize inherent physical properties as the best degumming method. The degree of removal of pectin and lignin by microbial degumming was cleanest with hemicellulose also reduced by microbial degumming.

• 한국식품과학회지
• /
• 제19권5호
• /
• pp.414-419
• /
• 1987

gel형성 다당류 생산균주인 Pseudomonas elodea ATTC 31461의 배양조건을 검토하기 위하여 탄소원, 질소원, 온도, pH의 영향을 조사한 결과 적당한 온도는 $30^{\circ}C$, pH는 6.5이고, 배지조성은 포도당 25g/L, peptone 12.38g/L, $K_2HP04$ 0.5g/L, MgSO4.7H20 0.1g/L이 적합하였으며 이때 다당류의 생성량은 32g/L이었다. 생산다당류의 1% 용액은 점도가 837mPas, 점조성지수는 2570mPas, 유동지수는 0.66이다.

• 한국수소및신에너지학회논문집
• /
• 제11권4호
• /
• pp.149-159
• /
• 2000

This paper is concerned with the performence of a steam reformer for 25kW class MCFC, which is compared with the theoretically calculated results at various operating conditions. The theoretical $H_2$ production amount and $CH_4$ conversion rate are calculated with variations of temperature and steam/carbon (S/C) ratio using fortran program, and the actual values are measured from flowmeter and gas chromatography. As a result of the comparison of theoretical and actual values, the theoretical $H_2$ production amount is calculated by $24.4m^3/hr$ at the normal operating condition(LNG $9m^3/hr$, S/C ratio 5, absolute pressure $2.77kg/cm^2$, $610^{\circ}C$), but the actual production amount is only $19.4m^3/hr$, which is 79.5% of the theoretical value. Nevertheless, at the normal operating condition, the reformer for 25kW class MCFC performed well for a 2,100 hr long run operation, constantly producing $H_2$.

• 한국식품조리과학회지
• /
• 제4권2호
• /
• pp.65-69
• /
• 1988

세 가지 액체배지를 사용하여 Berkeley대학 Dr. Bjeldanes Lab에서 isolate된 F. moniliforme을 생육시킨 결과 Czapek-Dox medium에서 Fusarin C생성량이 가장 높았으며 옥수수에 비하면 약 1/10정도의 양인 것으로 나타났다. 그리고 Czapek-Dox medium의 경우 $28^{\circ}C$에서 2주간 배양한 때에 Fusarin C의 생성량이 가장 많았으며 옥수수의 경우는 28$^{\circ}C$에서 1주간 배양한 때에 가장 높았다. 또한 Czapek-Dox medium의 initial PH가 6.5인 때에 Fusarin C의 생성량이 최대이었으며 6.3, 5.9인 때도 다른 PH보다 월등히 높은 양이 생성됨을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.561-578
• /
• 2020

The present work addresses the surface integrity and chip morphology in finish hard turning of AISI D3 steel under nanofluid assisted minimum quantity lubrication (NFMQL) condition. The surface integrity aspects include microhardness, residual stress, white layer formation, machined surface morphology, and surface roughness. This experimental investigation aims to explore the feasibility of low-cost multilayer (TiCN/Al2O3/TiN) coated carbide tool in hard machining applications and to assess the propitious role of minimum quantity lubrication using graphene nanoparticles enriched eco-friendly radiator coolant based nano-cutting fluid for machinability improvement of hardened steel. Combined approach of central composite design (CCD) - analysis of variance (ANOVA), desirability function analysis, and response surface methodology (RSM) have been subsequently employed for experimental investigation, predictive modelling and optimization of surface roughness. With a motivational philosophy of "Go Green-Think Green-Act Green", the work also deals with economic analysis, and sustainability assessment under environmental-friendly NFMQL condition. Results showed that machining with nanofluid-MQL provided an effective cooling-lubrication strategy, safer and cleaner production, environmental friendliness and assisted to improve sustainability.

• 수산경영론집
• /
• 제43권3호
• /
• pp.23-30
• /
• 2012

This study aimed to analyze the economic feasibility of Mackerel offshore aquaculture production performance in Jeju region, Korea. Based on the collected biological, costs and market price data, farming revenue and expenses during the farming period were evaluated, and the net present value and the internal rate of return of a 10-year cash inflow and cash outflow were estimated to determine the economic feasibility of Mackerel offshore aquaculture production system. Model results indicated that the Mackerel offshore aquaculture production performance would have high profitability under the current production and market situation. This is because of the relatively high survival rate, relatively low feed conversion ratio and good market prices. However, sensitivity analyses of main important biological and economic variables showed that the economic viability of Mackerel offshore aquaculture production system would be highly vulnerable to production and market condition changes.