• Journal of Biosystems Engineering
• /
• 제36권4호
• /
• pp.279-284
• /
• 2011

Protected vegetable production area is greater than 26% of the total vegetable production area in Korea, and portion of protected production area is increasing for flowers and fruits. To secure stable productivity and profitability, continuous and intensive monitoring and control of protected crop production environment is critical, which is labor- and time-consuming. Failure to maintain proper environmental conditions (e.g., light, temperature, humidity) leads to significant damage to crop growth and quality, therefore farmers should visit or be present close to the production area. To overcome these problems, application of remote monitoring and control of crop production environment has been increasing. Wireless monitoring and control systems have used CDMA, internet, and smart phone communications. Levels of technology adoption are different for farmers' needs for their cropping systems. In this paper, potential of wireless remote monitoring of protected agricultural environment using CDMA SMS text messages was reported. Monitoring variables were outside weather (precipitation, wind direction and velocity, temperature, and humidity), inside ambient condition (temperature, humidity, $CO_2$ level, and light intensity), irrigation status (irrigation flow rate and pressure), and soil condition (volumetric water content and matric potential). Scenarios and data formats for environment monitoring were devised, tested, and compared. Results of this study would provide useful information for adoption of wireless remote monitoring techniques by farmers.

• 한국수정란이식학회지
• /
• 제12권1호
• /
• pp.37-48
• /
• 1997

I. The Factors Influencing In Vivo Embryo Production by Condition of Superovulation Treatment These studies were carried out to establish an effective and practical system for comrnercialization of embryo production techniques by analyzing several factors influencing in vivo embryo production on superovulation treatment in Korean native cattle. In vivo embryos were flushed 226 times from 128 donors.The results obtained from the studies on the factors influencing in vivo embryo production by superovulation treatment were as follows : FSH-P had a significiant advantage(83.0%) over SUPER-OV in the percentage of fertilized embryos(P<0.01). No difference was found loetween FSH-P and SUPER-OV in the percentage of transferable and freezable embryos.2. The response of superovulation by SUPER-OV was greater than that of FSH-P The donors having 8~9 and more than 10 of corpora lutea(CL) derived by FSH-P were 40.0%(most frequent) and 33%, respectively. The donors having more than 12 and 10 CL derived by SUPER -OV were 33.3% (most frequent) and 56.6%, respectively.3. Embryo production after treatment of repeated superovulation was remarkablely decreased at 3rd time by FSH-P but did not differ among 1, 2 and 3rd times by SUPER-OV. Embryo production on intervals of repeated superovulation was significantly different for the number and percentage of fertilized, transferable and free-zable' embryos in FSH-P (P<0.01) and rernarkablely decreased in repeated superovulation of 81~120 interval days. The SUPER-OV showed no differences in interval days of repeated superovulation and was found better than FSH-P in the response of repeated superovulation. (Key words : in Vivo embryo, superovulation, FSH -P, SUPER-OV)

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.33-34
• /
• 2018

Currently, free-form building has been increased worldwide. However, as a finishing material of free-form building, the production of free-form concrete panels(FCPs) spends lots of cost and efforts since it is difficult to reuse the FCP formwork and lots of workers are needed to make free-form curve. In addition, the technology to produce the FCP economically and easily is insufficient. Therefore, the objective of this study is a basic study regarding production management for developing free-form concrete panels. To achieve the objective, the property of FCP and condition for effective production management and production process are analyzed. The results of this study can utilize to develop the algorithm for FCP production management.

• 산업경영시스템학회지
• /
• 제3권3호
• /
• pp.59-66
• /
• 1980

The purpose of this paper to study on measuring method in technical progress. Technology is combination method of raw material and capital, land, labour. The first step to technical Progress is COBB-DOUGLAS production function, so technical progresses are important role in economic growth and development. General production function from Y=f(K, L, T) and COBB-DOUGLAS production function Y=${AK^I}{L^b}$ is first condition. Technical progress is saving of production factor In capital saving, labour saving, neutral saving. Marred Hicks Robinson has Insist on technical progress by each view of production factor, but, what is most excellent measuring method of technical progress\ulcorner I : productivity index method. II : Gross Production function method. Productivity method used in every products level in weight values, gross method function method used in production factor attributed to products. Above two measuring method has delicate problem in each input factor, substitution relation and production factor simultaneously linked each others This basic problem based on technical progress is not solubable in this time.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.315-323
• /
• 2005

The integrated or the two-stage (dark anaerobic and photosynthetic) fermentation processes were compared for the hydrogen production using purple non-sulfur photosynthetic bacteria, Rhodopseudomonas palustris P4. Cell growth, pH changes and organic acids and bacteriochlorophyll contents were monitored during the processes. Culture broth of Rps. palustris P4 exhibited dark-red during the photosynthetic culture condition, while yellow under the anaerobic condition without light. Rps. palustris P4 grown at the photosynthetic condition evolved 0.38 and 1.33 ml $H_2$/mg-dcw during the dark and the light fermentation, respectively, which were totally 1.71 ml $H_2$/mg-dcw at the two-stage fermentation. The rate of hydrogen production using Rps. palustris P4 grown under the dark anaerobic condition was 2.76 ml $H_2$/mg-dcw which consisted of 0.46 and 2.30 ml $H_2$/mg-dcw from the dark and the photosynthetic fermentation processes, respectively. Rps. palustris P4 grown under dark anaerobic conditions produced $H_2$ 1.6 times higher than that of grown under the photosynthetic condition. However, total fermentation period of the former was 1.5 times slower than that of the latter, because the induced time of hydrogen production during the photosynthetic fermentation was 96 and 24 hours when the seed culture was the dark anaerobic and photosynthetic, respectively. The integrated fermentation process by Rps. palustris P4 produced 0.52 ml $H_2$/mg-dcw(1.01 mol $H_2$/mol glucose), which was 20% of the two-stage fermentation.

• 한국식품과학회지
• /
• 제8권1호
• /
• pp.33-41
• /
• 1976

1. 유기질소원(有機窒素源)으로는 soybean meal, 무기질소원(無機窒素源)으로는 $(NH_4)_2SO_4$가 lipase생산(生産)에 가장 효과(效果)이었다. 2. 배양중(培養中) 배지(培地)의 pH저하(低下)를 이르키는 xylose, glucose, fructose, galactose, mannose, maltose, soluble starch, dextrin을 탄소원(炭素源)으로 첨가(添加)하였을 때 lipase 생산(生産)이 심(甚)하게 저해(沮害)되었다. sucrose는 lipase생산(生産)을 저해(沮害)하지 않았으나 첨가효과(添加效果)는 인정(認定)되지 않았다. 3. 인산염(燐酸鹽)으로서는 $K_2HPO_4$, 마그네슘염(鹽)으로서는 $MgSO_4{\cdot}7H_2O$가 lipase생산(生産)에 가장 효과적(效果的)이었다. 4. Olive유(油), 대두유(大豆油) 및 야자유(油)의 첨가(添加)는 lipase생산(生産)을 증가(增加)시켰으며 1% olive유(油) 첨가시(添加時) lipase생산(生産)이 50% 증가(增加)되었다. 5. yeast extract $0.05{\sim}0.07%$첨가시(添加時) lipase생산(生産)이 약간 증가(增加)되었다. 6. 본균(本菌)의 lipase생산(生産)에 가장 적합(適合)한 배지(培地)는 soybean meal 2%, $K_2HPO_4$ 0.5%, $(NH_4)_2SO_4$ 0.1%, $MgSO_4{\cdot}7H_2O$ 0.05%, yeast extract 0.05%, olive유(油) 1%의 조성(組成)의 것으로서 최적배양조건하(最適培養條件下)에서 48시간(時間) 배양시(培養時)에 lipase생산(生産)이 최고(最高)에 도달(到達)하였다.

• KSBB Journal
• /
• 제17권3호
• /
• pp.228-234
• /
• 2002

Factorial design model을 이용하여 A. xylinum KJ1의 BC생산을 위한 최적 배양조건을 결정하였다. 요인 분석을 위한 실험 계획법으로는 부분요인 분석을 통한 factorial model을 이용하였으며, 주요 실험인자인 탄소원 농도, 교반속도(rpm), 산소분압, CSL의 농도의 네 가지 factor의 영향에 의한 BC생산량의 변화를 측정하였다. SAS 프로그램을 이용하여 전체 24개의 실험계획에서 각각의 factor의 조합에 의한 BC 생산성에 관한 결과 및 예측값을 비교한 결과 BC 생산량 면에서는 상관계수($R^2$)가 0.91으로 이었고, 수율면에서는 상관계수($R^2$)는 0.81이다. 최적 BC 생산을 위한 각 factor들이 탄소원의 농도 4%, 교반속도 460 rpm, 산소분압 0.28 atm, CSL 농도 6%일 때, 이때의 BC 생산량은 11.67 g/L로 예측되었다. 그리고 BC 생산 수율면에서 최적 배양조건이 탄소원 농도 4%, 교반속도 564 rpm, 산소분압 0.21 atm, CSL 농도 2%일 때 최적의 수율 0.42 g/g를 얻을 수 있을 것으로 예측되었다. 결정된 최적 조건에서의 실증 실험 결과 11.47 g/L의 BC 생산량을 얻을 수 있었으며, 이는 fermentor상에서의 기본실험에서 얻은 4.83 g/L보다 2.4배 이상 향상된 결과이다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.353-353
• /
• 2017

Rice yield of South Korea in 2015 was the highest of the last 30 years. It is important issue to establish food policy whether the historically highest yield in 2015 can be continued or just one-off event. Therefore, it is necessary to understand whether such a high yield as 2015 will be reoccurred. The aim of this study was to find out what climatic factor affect rice yield and how often these climatic factor could occur. For this study, the yield monitoring data from National Institute of Crop Science, Rural Development Administration and the meteorological data provided by Korea Meteorological Administration are used to identify the weather conditions could cause high yield, and how often these conditions occurred in the past. Our results indicated that such as high yield as 2015 could occur only when the mean sunshine hours of July and the mean sunshine hours from the end of August to early September was more than 5.1 hours and 6 hours, respectively. Mean sunshine hour of July may be related to grain number. The mean sunshine hour from the end of August to early September was presumed to relate to grain filling ratio. The relationship between monthly mean temperature and yield or yield component was not clear in this study. In this study, any cycle of high weather condition was not found. Therefore, the probability of high yield weather condition was expressed by frequency. The frequency of the sunshine hour, could make high yield, were 8/35 (23%) over the past 35 years. And the frequency of two years consecutive sunshine hour condition, which could cause high yield, was 1/35 (2.9%). The frequency of recurrence of sunshine hour making high yield within the next 5 years or 10 years after high yield weather condition were 4/35 (11.4%). After all, the high yield as much as yield of 2015 could not be one-off event. But it was not also consecutive event.

• 생태와환경
• /
• 제50권4호
• /
• pp.363-373
• /
• 2017

본 연구는 온도, 광도, 인 등 서로 다른 환경 조건 하에서 Anabaena circinalis의 지오스민 생산 특성을 평가하기 위해 수행되었다. 실험에 사용한 남조류는 팔당호에서 분리되었다. 남조류 A. circinalis의 성장률과 지오스민 생산은 온도(10, 15, 20, $25^{\circ}C$), 광도(60, 120, $240{\mu}mol\;photons\;m^{-2}\;s^{-1}$), 인 농도(0.01, 0.05, 0.25, 0.50, $1.00mg\;L^{-1}$) 등 여러 요인들을 통해서 조사하였다. 최고 성장률과 Chl-a 농도는 온도 $25^{\circ}C$, 광도 $60{\mu}mol\;photons\;m^{-2}\;s^{-1}$ 및 인 농도 $1.00mgP\;L^{-1}$에서 각각 나타났다. 총 지오스민 생산량은 각 환경요인의 최적 성장 조건에서 가장 높았으며, 지오스민 생산 잠재력(Chl-a 농도에 대한 지오스민 생산 비율)은 늦가을 및 초겨울과 같은 저온 기간을 포함한 불리한 성장조건에서 높았다. 본 연구 결과는 A. circinalis의 지오스민 생산이 엽록소 합성과 직접적인 관련이 있고 세포 성장 조건에 따른 다양한 변화 가능성을 나타내었다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.119-124
• /
• 2013

In this paper, we analysed fatty acid methyl ester contents in the biodiesel which is produced from the newly developed biodiesel production equipment. The lard oil was used as the raw material through various experimental conditions. Thirty one experiments were conducted, which were based on the experimental conditions that designed by central composite design method. The effects of four independent variables, including reaction temperature, reaction time, oil to methanol molar ratio, and catalytic amount, were investigated at five levels using central composite design (CCD). Fatty acid methyl ester content was chosen dependent variable. Although the results of analysis of the surface with an irregular surface geometry showed that the biodiesel was partially impure after the reaction due to the natural characteristics of the lard oil as the raw material, we could confirm the relationship between them from the facts that the production amount of fatty acid methyl ester changes according to reaction temperature, reaction time, oil to methanol molar ratio, and catalytic amount.