• Fashion & Textile Research Journal
• /
• 제17권6호
• /
• pp.932-941
• /
• 2015

An aging population and increasing consumer demand for high-quality and innovative new products are key drivers for growth in the cosmeceutical industry. Cosmeceuticals are defined as products with biologically active ingredients that have a measurable effect on the user. This study explored the effects of shopping orientation and store attributes on impulse buying behavior for cosmeceuticals. We obtained 437 usable questionnaires from university students who had purchased cosmeceutical products. Data analysis was conducted using confirmatory factor analysis and structural equation modeling analysis via AMOS 18.0. The findings were: 1) hedonic shopping orientation and convenience shopping orientation had positive effects on product efficacy and promotion of the cosmeceutical store 2) brand shopping orientation had a positive effects on store atmospheric, skin care service, and brand of the cosmeceuticals store and 3) product efficacy and promotion of store attributes had a direct effect on impulse buying behavior for cosmeceuticals. Consumers who tended to enjoy the shopping to refresh themselves and to experience convenient shopping were likely to purchase cosmeceuticals impulsively, which mediated by the store attributes (product efficacy and promotion). Therefore, we confirmed partly causal relationships among the shopping orientation, store attributes, and impulse buying behavior of cosmeceuticals. Both managerial and theoretical implication for practitioners and researchers were discussed for managing product information more efficiently along with promotion strategies to trigger cosmeceuticals consumers in the context of shopping.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.416-421
• /
• 2007

Physical damage to fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/packaging system to protect the product, the G-factor to the product that causes shock damage needs to be determined. The shock fragility of organisms such as fruits with a concept correspondent to the G-factor of industrial products was calculated and we defined the allowable bio-shock fragility index as the value divided peak acceleration that was generated in safe drop height by standard acceleration of gravity. We did modeling for safe drop hight that would prevent fruits from damage by drop tests and tried to estimate the allowable bio-shock fragility index of pears and apples for optimum packaging design. The bio-shock fragility index of pears was in the range of $0.74{\sim}2.29\;G$, while apples had a slightly higher value than that of pears, of $0.51{\sim}2.98\;G$. This result shows accordance with the general fact that apples have a firmer structure and get less damage from the same impact. Based on this result, it is possible to create an optimum packaging design by providing a damage standard by impact.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제39권8호
• /
• pp.773-780
• /
• 2015

Traditionally, additive manufacturing (AM) technology has been used to fabricate prototypes in the early development phase of a product. This technology is being applied to release manufacturing of a product because of its low cost and fast fabrication. AM technology is a process of joining materials to fabricate a product from the 3D CAD data in a layer-by-layer manner. The orientation of a layer during manufacturing can affect the mechanical properties of the product because of its anisotropy. In this paper, tensile testing of polymer-based specimens were built with a typical AM process (FDM, PolyJet and SLA) to study the mechanical properties of the AM materials. The ASTM D 638 tensile testing standard was followed for building the specimens. The mechanical properties of the specimens were determined on the basis of stress-strain curves formed by tensile tests. In addition, the fracture surfaces of the specimens were observed by SEM to analyze the results.

• Korean Journal of Construction Engineering and Management
• /
• 제16권2호
• /
• pp.97-105
• /
• 2015

Building information modeling (BIM)-based construction projects have increased and become more varied, and as such the management of BIM-based facility information is also increasingly important for facility maintenance. Information management, and specifically product data mapping, however, has some problems in the area of manual data entry and does not adequately consider the exchange requirements of facility maintenance. Therefore, it is necessary to introduce a method to improve the management of composite object information for BIM-based facility maintenance so that it can handle construction operation building information exchange (COBie) data for a composite object. Therefore, we present a method to map COBie data to related materials of a composite object. This research contributes to increasing the efficiency and accuracy of the required information mapping between a building model and product data using a BIM library through optimal BIM data adoption. Moreover, it allows for the creation and management of specific product data at the design development phase.

• Journal of the Korea Society of Computer and Information
• /
• 제11권5호
• /
• pp.211-221
• /
• 2006

Manufacturing Execution System(MES) immediately enables users to share the information of systems industrywide, efficiently manages synthetic information with data collection through treating the data in a fast way, and helps their decision-making. MES for real-time information processing requires certain conditions such as data modeling of RFID, which has recently attracted attentions, and monitoring of each product unit from manufacture to sales. However, in the middle of processing the unit with a RFID tag, transponders(readers) can't often read the tag due to reader's malfunctions, intentional damages, loss and the circumstantial effects; for that reason, users are unable to confirm the location of the product unit. In this case, users cannot avoid tracing the path of units with uncertain clues. In this paper we suggest that the unique MES based on RFID and Bayesian Network can immediately track the product unit, and show how to evaluate it.

• Journal of Digital Convergence
• /
• 제16권11호
• /
• pp.211-219
• /
• 2018

This study explored the relationships among perceived values of environment friendly-cars and shared cars, product attitudes, subjective norms, and usage intentions. The study also examined the difference between the consumer attitudes toward environment friendly-cars and shared-cars. 357 survey responses of Chinese consumers were analyzed with structural equation modeling. The results indicate that the perceived values of environment friendly-cars had positive effects on the product attitude, while the environmental as well as economic value of shared-cars had positive effects on the product attitude. The product attitude, subjective norm and anticipated guilt had positive effects on the usage intention. The results are expected to provide useful marketing strategies related to both environment friendly-car and shared car industries.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.329-329
• /
• 2022

Accurate characterization of terrestrial precipitation variation from high spatial resolution satellite sensors is beneficial for urban hydrology and microscale agriculture modeling, as well as natural disasters (e.g., urban flooding) early warning. However, the widely-used top-down approach for precipitation retrieval from microwave satellites is limited in several hydrological and agricultural applications due to their coarse spatial resolution. In this research, we aim to apply a novel bottom-up method, the parameterized SM2RAIN, where precipitation can be estimated from soil moisture signals based on an inversion of water balance model, to generate high spatial resolution terrestrial precipitation estimates at 0.01º grid (roughly 1-km) from the C-band SAR Sentinel-1. This product was then tested against a common reanalysis-based precipitation data and a domestic rain gauge network from the Korean Meteorological Administration (KMA) over central South Korea, since a clear difference between climatic types (coasts and mainlands) and land covers (croplands and mixed forests) was reported in this area. The results showed that seasonal precipitation variability strongly affected the SM2RAIN performances, and the product derived from separated parameters (rainy and non-rainy seasons) outperformed that estimated considering the entire year. In addition, the product retrieved over the mainland mixed forest region showed slightly superior performance compared to that over the coastal cropland region, suggesting that the 6-day time resolution of S1 data is suitable for capturing the stable precipitation pattern in mainland mixed forests rather than the highly variable precipitation pattern in coastal croplands. Future studies suggest comparing this product to the traditional top-down products, as well as evaluating their integration for enhancing high spatial resolution precipitation over entire South Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권3호
• /
• pp.185-198
• /
• 2017

Since the year 2000, the growth rate of domestic manufacturing has declined and the sales and employment have decreased. Major developed countries have established a variety of strategies to strengthen their manufacturing competitiveness, and promote manufacturing innovation through the convergence of technology and ICT. The key to manufacturing innovation is to reduce the time and cost for developing new products using modeling and simulation (M&S) technology in the product design stage. M&S industries, which belong to the top sector of the industry value chain, have a huge ripple effect across other industries. On the other hand, the competitiveness of the domestic M&S industry is weak compared to developed countries and even the definition and classification of domestic M&S companies have not been made. In this paper, by analyzing the Korea Standard Industry Classification (KSIC), five fine industry classifications included in M&S service companies were derived. In addition, the 307 M&S service companies were derived in accordance with the selection procedure of 3 steps from the 11,822 related companies. To analyze the capabilities of domestic M&S service companies, the current status of the selected M&S service companies was investigated. Considering the Korean economy's high dependence on the manufacturing industry, strengthening the competitiveness of manufacturing industry is required by enhancing the capacities and building an ecosystem in domestic M&S services for future sustainable economic growth.

• The Journal of the Korea Contents Association
• /
• 제13권10호
• /
• pp.256-265
• /
• 2013

With economic development and ever-changing technology, human has entered the era of "Product-as-a-Service". At the same time, the update of the product gradually accelerated. The demand of consumers for products are slowly changed, they pay more attention to convenience, comfort and reliable quality and safety of the product. That is the humanized design problem that often mentioned in the product design. This also put forward new requirements for the design and development of product modeling. So how to reflect the humanized ideas in the product design has also become common focus of attention of product designers, users and producers of a new era. The paper is based on the principles of ergonomics to investigate and improve the daily life utensil - flashlight. Firstly, make a sample survey of the flashlight in Beijing market and analyze the characteristics and problems of flashlight products. Secondly, explore the use of the flashlight and proposed Flashlight curved grip design to reduce the occurrence of wrist discomfort and damage to the body caused by poor posture of the operation of users. Finally, determine the range of the length and width of the body of the flashlight according to the length and width measurement data of the Chinese palm. Wishing that the improvements of flashlight products in ergonomics can improve use of feelings of these products and give a theoretical guidance for solving similar problems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제20권1호
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.