• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 제34차 추계 국제 학술대회
• /
• pp.407-411
• /
• 2004

Ohmic heating occurs when an electric current is passes through food, resulting in a temperature rise in the product due to the conversion of the electric energy into heat. The time spent in the thawing is critical for product sterility and quality. The objective of this study is to conduct numerical modelling between the effect of ohmic thawing intensity on PTT(phase transition time) at constant concentration and the effect of matrix concentrations on PTT at constant voltage condition. the stronger ohmic thawing intensity resulted in decreasing the PTT. High ohmic intensity causes short PTT. And the higher gelatin concentration, the faster increment of PTT. A numerical modeling was executed to predict the PTT influenced by the power intensity using exponential regression and the PTT influenced by gelatin concentration using logarithmic regression. Therefore, from this numerical model of gelatin matrix, it is possible to estimate exact values extensively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.198-203
• /
• 1995

In the paper, we have proposed a new technique to detemine the initial billet for the forged products using a function approximation in neural network. A three-layer neural network is used and a back propagation algorithm is employed totrain the network. An optimal billet which satisfied the forming limitation, minimum of incomplete filling in the die cavity, load and energyas well as more uniform distribution of effective strain, is determined by applying the ability of function approximation of te neural network. The amount of incomplete filling in the die, load and forming energyas well as effective strain are measured by the rigid-plastic finite element method. The new technique is applied tofind the optimal billet size for the axisymmetric rib-web product in hot forging. This would reduce the number of finite element simulation for determing the optimal billet of forging products, further it is usefully adapted to physical modeling for the forging design.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2009년도 춘계학술대회
• /
• pp.179-182
• /
• 2009

PSS (Product-Service Systems) 개발에 있어서 중요한 요소로서 사용자의 경험을 들 수 있다. 제품개발 시 가장 중요하게 고려되는 요소로서 고객의 요구 (customer requirement)와 니즈 (needs)가 언급되곤 한다. 고객의 요구나 니즈는 실제로 관련 제품이나 서비스를 사용해 본 고객의 경험에 근거하고 있다. 따라서 고객의 경험을 제대로 파악하고 이를 추출하는 것이 성공적인 제품개발의 시작이다. 본 연구의 목적은 사용자 경험을 활용하는 제품-서비스 시스템 (UXPSS)을 위한 프레임워크 모델을 개발하고 샘플 제품에 대한 구현을 실시한다. 이를 위해서 사용자 경험, 제품의 서비스화, 서비스의 제품화, 서비스 사이언스, 기능분석 및 모듈화를 결합한 통합 모델을 개발하고 이를 실험적으로 구현해 본다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.643-652
• /
• 2009

This paper presents brief history and a state-of-the-art survey of Life Cycle Cost (LCC) analysis, in particular LCC analysis in the Urban Transit Vehicle, based on a internationl codes and standards related to LCC analysis. A main objective of the LCC analysis is to quantify the total cost of ownership of a product throughout its full life cycle, which includes research and development, construction, operation and maintenance, and disposal. The predicted LCC is useful information for decision making in purchasing a product, in optimizing design, in scheduling maintenance, or in planning overhaul. This paper presents a LCC procedure consisting of seven steps, which are "Problems definition", "Cost elements definition", "System modeling", "Data collection", "Cost profile development", "Evaluation", and "Verification". Sub-activities to be encompassed in the seven steps procedure are described.

• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2016

3D printer is the equipment of the system for sequentially layer laminated in the materials. Now 3D printer used in various fields such as, semiconductor, electricity automobile, medical and various types of output method and material. In this paper, we studied about the improvement on warpage due to shrinkage of product from 3D printer of FDM(Fused Deposition Modeling) type, we proposed measures systematically to solve warpage problem using of 6SC(6 Step Creativity) method of practical TRIZ. After experimented with product prototypes experiment, we verified effect about solution.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.199-207
• /
• 2013

Meeting electromagnetic compatibility (EMC) requirements can be a significant challenge for engineers designing today's electronic devices. Traditional approaches rely heavily on EMC design rules. Unfortunately, these design rules aren't based on the specific EMC requirements for a particular device, and they don't usually take into account the specific function of the circuits or the many design details that will ultimately determine whether the device is compliant. This paper describes a design methodology that relates design decisions to the product's EMC requirements. The goal of performance-based EMC design is to ensure that electronic designs meet EMC requirements the first time the product is tested. More work needs to be done before this concept reaches its full potential, but electronic system designers can already derive significant benefit by applying this approach to products currently under development.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.170-176
• /
• 2002

To exchange CAD data between heterogeneous CAD systems, we generally use a neutral format especially STEP, which is the international standard (ISO-10303) for product model data exchange. AP214 (Application Protocol) for the automotive industry not only takes into account geometry and organizational data, but also provides a classification mechanism for product modeling. When reading a STEP file during a design process that is exported from other CAD systems, it is a burden to a designer to go through the tedious process of removing duplicate or non-manifold entities, adjusting parts, and rearranging text. We analyze the structure of AP214 and develop a healing tool to solve the following problem. Without the assembly information in the Master workspace of CATIA, or to read a STEP file from Pro/Engineer, a designer should do a repetitive process of disintegrating an assembly into parts one by one. We have developed a post-processing tool for STEP AP214 that separates out a part from an assembly model and adjusts superfluous or useless entities using the ACIS kernel.

• International Journal of CAD/CAM
• /
• 제2권1호
• /
• pp.29-37
• /
• 2002

De-manufacturing is an entire process of collecting, disassembling, reusing, refurbishing, recycling, and/or disposing products that are obsolete or un-repairable. Designing the products for inexpensive and efficient disassembly enhances the ease of de-manufacturing. Virtual disassembly addresses the difficulty and the methods to disassemble a product in design stage rather than really disassemble a product at the end of its life cycle. Based on the virtual disassembly analysis results, design will be improved for better assembling/disassembling. This paper presents a systematic virtual disassembly methodology such as disassembly relation modeling, path/sequence automatic generation and evaluation. This paper also presents a new virtual disassembly interface paradigm via virtual reality technology for disassembly simulation in virtual environment.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.169-177
• /
• 1991

The Existing Protect schedulings are mathematical nodes upon which probability control is based. In fact, under the mechatronics environment in the new product design and development, statistical information is very poor or sometimes non-existent. Probabilistic PERT/CPM methods are not always satisfying because those methods suppose that it is possible to apply central- limit theorem and there exists a critical path which is much mart critical than all the other paths. Fuzzy project scheduling is possibility based scheduling. For this reason, the Fuzzy Project Scheduling essential to design, development and control the new product under the mechatranics environment. This paper deals with a modeling on the project scheduling which use fuzzy set theory. Fuzzy concepts in the project scheduling are shown to be very useful and easy to work with in the R & D system.