• Journal of Hydrogen and New Energy
• /
• v.33 no.3
• /
• pp.240-246
• /
• 2022

This study was conducted to develop a domestic product for a flow control valve for a hydrogen refueling station, and a domestic prototype was manufactured and the durability performance evaluation was conducted through comparison with an imported products. The stress generated by the internal pressure was checked and safety was confirmed using a commercial structural analysis program, ABAQUS, in accordance with the withstand pressure test standards. In addition, after identifying the weak areas the fatigue life was predicted through a commercial software, fe-safe. This fatigue analysis showed that the hydrogen gas repeated test criteria were satisfied.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.537-544
• /
• 2019

In currently electronic systems, the speed of information integration has increased due to the development of electronic technology. However, due to the increase in the number of parts and groups, the product structure has become complicated. In this paper, a study was conducted to evaluate quantitatively the replacement of a small equipment. First, the level of the replacement was determined through the algorithm for the replacement level of parts. Next, we defined the ease of detail replacment, and the factors for each detail replacement. In order to calculate the weighting of the detail ease, we performed the analysis of the replacement process of subcomponents of communication exchanger and defined the evaluation criteria. Finally, the completion of the evaluation check sheet and the evaluation score table.

• Korean Journal of Clinical Pharmacy
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2000

The bioequivalence of two omeprazole preparations was evaluated following their oral administration to 16 normal volunteers. The test product was 'Ulpro tablet' made by Boryung Pharmaceutical Co. and the reference was 'Losec capsule' made by Yuhan Corp. After one capsule or tablet containing 20 mg omeprazole was administered, blood was taken at predetermined time intervals and the concentration of the drug in plasma was determined with an HPLC method. AUC and $C_{max}$ were determined and analyzed statistically for the evaluation of bioequivalence of the two products. The differences in AUC and $C_max$ between two products were $0.45\%\;and\;2.83\%$, respectively. The powers for AUC and $C_{max}\;were\;89.2\%\;and\;>90\%$, respectively. Confidence intervals were within $20\%$ for AVC and $C_{max}$All of these parameters met the criteria of KFDA for bioequivalence, indicating that 'Ulpro tablet' is bioequivalent to 'Losee capsule.'

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.393-400
• /
• 2017

The purpose of this study is to suggest a method to reduce the dose by Analyzing the dose area product (DAP) and image quality according to the change of tube current using NEMA Phantom. The spatial resolution and low contrast resolution were used as evaluation criteria in addition to signal to noise ratio (SNR) and contrast to noise ratio (CNR), which are important image quality parameters of intervention. Tube voltage was fixed at 80 kVp and the amount of tube current was changed to 20, 30, 40, and 50 mAs, and the dose area product and image quality were compared and analyzed. As a result, the dose area product increased from $1066mGycm^2$ to $6160mGycm^2$ to 6 times as the condition increased, while the spatial resolution and low contrast resolution were higher than 20 mAs and 30 mAs, Spatial resolution and low contrast resolution were observed below the evaluation criteria. In addition, the SNR and CNR increased up to 30 mAs, slightly increased at 40 mAs, but not significantly different from the previous one, and decreased at 50 mAs. As a result, the exposure dose significantly increased due to overexposure of the test conditions and the image quality deteriorated in all areas of spatial resolution, low contrast resolution, SNR and CNR.

• The Research Journal of the Costume Culture
• /
• v.14 no.4
• /
• pp.542-555
• /
• 2006

The main objective of this study was to investigate the relationship between benefits segmentation and knitwear purchasing behavior of college female students in the U.S. The questionnaires for this survey were developed to measure knitwear purchasing behavior and benefits segmentation. The questionnaire was administered to 119 female college students in the University of California. The data was analyzed by percentage, frequency, mean, factor analysis, Cluster Analysis and ANOVA, Duncan Multiple Range test. The female college students in the U.S. were classified into fourth subdivisions by the cluster analysis. In the case of fashion information sources of knit wear, significant differences were found according to benefits sought subdivision in observation of famous people's clothing, fashion articles in magazines and newspapers, TV advertisements, Newspaper advertisements, advice of salespeople, and Catalogs. The evaluation criteria of knit wear product of consumers were significantly different depending on benefits sought subdivision in design/style, quality of construction, fashionable, brand and store name, pleasing to others, prestige, and sexy. The store attributes of knitwear product of consumers were significantly different depending on benefits sought subdivision in friendliness of sales personnel, product knowledge of sales personnel, brand names, new fashion, and variety of products. The outlook for the industry of knitwear look to remain bright, there should be a continuous effort to research and invest in consumer satisfaction of knitwear.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.223-232
• /
• 1992

The ultimate purpose of this study is to build a model on clothing satisfaction which extends the consumer satisfaction model by unifying the exportation antecedents. In the literature study, it is proposed to clarify the concepts on the clothing satisfaction, and to investigate the present paradigms of the consumer satisfaction. It is widely accepted by the clothing researchers that the clothing satisfaction is a comparative process in which the evaluation criteria are used to judge the clothing product and to access the disconfirmation. In the Disconfirmation paradigm, the role of the expectation is very important. We propose to classify the expectation into the expective expectation and the normative expectation. The normative expectation applies when the investment cost and effort are considered. The expectation is shown to be affected by the expectation antecedents of the product characteris-tics, the situation characteristics, and the consumer characteristics. We investigate in detail those clothing satisfaction determinants and their measurement methods. Then, we build a clothing satisfaction model by the disconfirmation paradigm which is composed of the expectation antecedents, the expectation (expective expectation, normative expectation), the perceived clothing product performance, and the disconfirmation.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.207-216
• /
• 2005

It is difficult to decide which security functions(class, family, component) in the Common Criteria(CC) are important, since there is no research result about the frequency of use of security functions in real security product or Protection Profiles(PPs). Thus, we survey security functions in CC and 33 PPs that can be classified by 10 product types, and create a set of 'frequency of use of security functions' in CC and each types of security product. Our research results are useful for development of a new classification schema, as well as, estimation of development and evaluation efforts of security products.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1561-1583
• /
• 2022

Context: Testing is one of the techniques that can assure the quality of software including the domain of Software Product Line (SPL). Various techniques have been deliberated to enhance the quality of SPL including Model-based Testing (MBT). Objective: The objective of this study is to analyze and classify trends of MBT in SPL covering the solutions, issues and evaluation aspects by using taxonomy form. Method: A Systematic Literature Review (SLR) was conducted involving 63 primary studies from different sources. The selected studies were categorized based on their common characteristics. Results: Several findings can guide future research on MBT for SPL. The important finding is that the multiple measurements are still open to improving current metrics to evaluate test cases in MBT for SPL. The multiple types of measurement required a trade-off between maximization and minimization results to ensure the testing method which could satisfy multiple test criteria for example cost and effectiveness at the same time.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.435-441
• /
• 2016

The importance of radiation dose display of medical X-ray equipment was emphasized, while third edition of IEC(International Electrotechnical Commission) 60601 started to apply. The existing medical X-ray equipment selected a method for attaching the DAP(Dose Area Product) meter when the dose display. However, because the DAP meter was dependent on all of the income, And it did not yet produced in Korea. So, we received the support of Seoul R&BD Program(Grants No. C1152055) to produce DAP meter prototype of the Domestically technology. In this study, the performance of this prototype was evaluated by comparing the German company's product Evaluation item was an electronic capture performance, radiation dose dependence, radiation quality dependence, energy transmittance, repeatability, light transmittance of 6 entries. And IEC 60580 was based on this evaluation. Evaluation results were electronic capture performance intrinsic error 9.5%, radiation dose dependence limits of variation 1%, repeatability coefficient of variation 2%, energy transmittance 91% each assessment was passed. However radiation quality dependence limits of variation 29%, light transmittance 55% was less than acceptance criteria.

• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2021

An analytical method was developed and optimized for the quantification of a plant growth regulator, 2,6-diisopropylnaphthalene (2,6-DIPN), in agricultural products using gas chromatography-tandem mass spectrometry. The samples were extracted, partitioned, and were purified using a Florisil® cartridge. To validate the analytical method, its specificity, linearity, limit of detection (LOD) and limit of quantification (LOQ) of the instrument, LOQ of the analytical method (MLOQ), accuracy, and repeatability were considered. The method displayed excellent results during validation, and is suitable for the determination and quantification of the low residual levels of the analyte in the agricultural samples. All of the results with the optimized method were satisfactory and within the criteria ranges requested in the Codex Alimentarius Commission guidelines and the Ministry of Food and Drug Safety guidelines for pesticide residue analysis. The developed method is simple and accurate and can be used as a basis for safety management of 2,6-DIPN.