• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.315-322
• /
• 2012

Alkali-activated slag (AAS) is the most obvious alternative materials that can replace OPC. But, AAS industrial usage as a structural material should be evaluated for its durability. Carbonation resistance is one of the most important factors in durability evaluation. Test results for 18 slag-based mortars activated by sodium silicate and 6 OPC mortars were obtained in this study to verify the carbonation property. Main variables considered in the study were flow, compressive strength before and after carbonation, and carbonation depth. Mineralogical and micro-structural analysis of OPC and AAS specimens prior to and after carbonation was conducted using XRD, TGA, FTIR FE-SEM. Test results showed that CHS was major hydration products of AAS and, unlike OPC, no other hydration products were found. After carbonation, CSH of hydration product in AAS turned into an amorphous silica gel, and alumina compounds was not detected. From the analysis of the results, it was estimated that the micro-structures of CSH in AAS easily collapsed during carbonation. Also, the results showed that this collapse of chemical chain of CSH lowered the compressive strength of concrete after carbonation. By increasing the dosage of activators, carbonation resistance and compressive strength were effectively improved.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.82-89
• /
• 2009

According to the great city development and the rapid growth of redevelopment project, waste concrete emission has been increased. Waste concrete powder is one of the by-product originated from the recycling of the waste concrete. The more making high quality recycled aggregate to use aggregate for concrete, the more waste concrete powder is producted relatively. Therefore, to realize the total recycling of waste concrete, development of recycling technology for waste concrete powder need very much. This technical note present the discharged process and the various properties of waste concrete powder. As the results, on the average, the maximum particle-size of waste concrete powder is less than $600{\mu}m$, and oven-dry density is less than $2.5g/cm^3$. And waste concrete powder contains more than 50% of $SiO_2$, 30% of CaO and 10% of $Al_2O_3$. Thus qualities of waste concrete powder is lower than those of high quality raw material for concrete. However, if it is processed by grading to the purpose, it will be used as resource of raw materials for construction field.

• Smart Media Journal
• /
• v.6 no.2
• /
• pp.42-49
• /
• 2017

It is important to realize automation services by communicating in IoT with humans, objects & objects, and forming a common network. People used web like the most powerful network way to sharing things and communication. Therefore the efficiency method communication between each device and the web in IoT could be different from ones. The best method for high quality software product in web applications is software reuse ; Modules, classes, patterns, frameworks, and business components are reusable elements of various perspectives. Components is plugged with others through well-defined interfaces, which can overcome the operation and complexity of application development. A web-based distributed environment for IoT applications is a standard architecture use information collected from various devices for developing and using applications. For that reason, the network management which manages the constituent resources for the best service control in IoT application is required as a sub-layer support service in most applications as well as individual applications. In this paper, we measure to develop a network management system based not only by components but on heterogeneous internetworks. For procedure this, we clarify a component architecture for classifying and classify also the component needed in the IOT and network domain or order the type of real network management system.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.187-196
• /
• 2008

The system development approach method of the new paradigm, as being standardizing MDA(Model Driven Architecture) in OMG(Object Management Group), the core technique of MDA definite technique structure for system materialization focusing on Model, is to build the design and the statement for system in PIM(Platform Independent Model), Materialization technique, and to build PSM(Platform Specific Model) adapt to materialization environment, and then to be the technique transforming into language Platform suitable to materialization environment. It includes MOF(Meta-Object Facility), UML, XMI(XML Metadata Interchange), CWM(Common Warehouse Metamodel), the core of MDA. Though these operations MDA support automatic tools product the practicable system after carrying out transform operation with the above information. In this thesis, it will be approached how to design and materialize the Bachelor management system based on MDA and the importance of modeling should be emphasized by applying to the approach method based on MDA. It should be suggested how to develop software efficiently, written it out in PIM, and suggested the process transforming PSM into EJB by J2EE Platform. The system is designed and implemented using automatic tool, edit machine(Together Architect 2006 for Eclipse, Edit plus2) supporting MDA and Database Modeling tool(ER/WIN 4.1). In conclusion, it should be suggested the efficiency analysis result for development process of traditional and based on MDA.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.117-128
• /
• 2002

Virtual LAN (VLAN) is an architecture to enable communication between end stations as if they were on the same LAN regardless of their physical locations. VLAN defines a limited broadcast domain to reduce the bandwidth waste. The Newbridge Inc. developed a layer 3 VLAN product called VIVID, which configures a VLAN based on W subnet addresses. In a VIVID system, a single route server is deployed for address resolution, VLAN configuration, and data broadcasting to a VLAN. If the size of the network, over which the VLANS supported by the VIVID system spans, becomes larger, this single route server could become a bottleneck point of the system performance. One possible approach to cope with this problem is to deploy multiple route servers. We propose two architectures, organic and independent, to expand the original VIVID system to deploy multiple route servers. A course of simulations are done to analyze the performance of each architecture that we propose. The simulation results show that the performances of the proposed architectures depend on the lengths of VLAN broadcasting sessions and the number of broadcast data frames generated by a session. It has also been shown that there are tradeoffs between the scalability of the architecture and their efficiency in data transmissions.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.98-107
• /
• 2000

Increased use of computers in AEC (Architecture, Engineering and Construction) has expanded the amount of information gained from CAD (Computer Aided Design), PMIS (Project Management Information System), Structural Analysis Program, and Scheduling Program as well as making it more complex. And the productivity of AEC industry is largely dependent on well management and efficient reuse of this information. Accordingly, such trend incited much research and development on ITC (Information Technology in Construction) and CIC (Computer Integrated Construction) to be conducted. In exemplifying such effort, many researchers studied and researched on IFC (Industry Foundation Classes) since its development by IAI (International Alliance for Interoperability) for the product based information sharing. However, in spite of some valuable outputs, these researches are yet in the preliminary stage and deal mainly with conceptual ideas and trial implementations. Research on unveiling the process of the IFC application development, the core of the Design Information management system, and its applicable plan still need be done. Thus, the purpose of this paper is to determine the technologies needed for Design Information management system using IFC, and to present the key roles and the process of the IFC application development and its applicable plan. This system play a role to integrate the architectural information and the structural information into the product model and to group many each product items with various levels and aspects. To make the process model, we defined two activities, 'Product Modeling', 'Application Development', at the initial level. Then we decomposed the Application Development activity into five activities, 'IFC Schema Compile', 'Class Compile', 'Make Project Database Schema', 'Development of Product Frameworker', 'Make Project Database'. These activities are carried out by C++ Compiler, CAD, ObjectStore, ST-Developer, and ST-ObjectStore. Finally, we proposed the applicable process with six stages, '3D Modeling', 'Creation of Product Information', 'Creation and Update of Database', 'Reformation of Model's Structure with Multiple Hierarchies', 'Integration of Drawings and Specifications', and 'Creation of Quantity Information'. The IFCs, including the other classes which are going to be updated and developed newly on the construction, civil/structure, and facility management, will be used by the experts through the internet distribution technologies including CORBA and DCOM.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.185-194
• /
• 2012

Contemporary society maintains mass-product system that keeps endless cycle of making and consuming. In this vein, everyday life becomes to be under the control of function and efficiency. On the contrary, the people are getting to have a desire of escaping from this everydayness, that is, the desire for non-everydayness. British architect, Nigel Coates understood the potentiality of contemporary metropolis which produce new experiences through their heterogeneities. During 1980s, Japanese economic bubble provided rich nourishment to the desire for non-everydayness based on consumers' tastes. Nigel Coates snatched this phenomena and designed commercial spaces aligned to the non-everydayness. He shows very eloquent version of escaping sense. We can find the exquisite quality of non-everydayness through design vocabulary of object's form and arrangement. In the viewpoint of object form, Coates adopted classical statues of Greek, that is antique, and modern gadgets such as airplane wings and seats. Also, we can find abundant gestures of curvilineal contours throughout the objects he designed. As for the objects' arrangement, he introduced repetition and curved composition that can stimulate human interaction with interior scape.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.836-843
• /
• 2003

The automatic train control (ATC) system development project for the Automated Guideway Transit (AGT) system has high technical risk because the system is unmanned train control system using wireless technology which was unprecedented in train control industry of Korea. To overcome the technical risk during concept design phase of the ATC system development project, the integrated product team(IPT) carried out a reverse and reengineering process using a systems engineering design model. The generic systems engineering process is incorporated in the both reverse and reengineering process. As a result of the systems engineering effort, the IPT has built top layer systems engineering design model of the ATC subsystem. The purpose of this paper is to deliver the reverse and reengineering process which was used to develop the systems engineering design model of ATC system using a computer aided systems engineering tool. This study also shows that the model based reverse and reengineering process can reduce the technical risk by identifying the differences of requirement, functional and physical architecture between a reference system and a target system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.241-246
• /
• 2008

Design of a high-speed railway line requires collaboration of heterogeneous application systems and of engineers with different background. Object-based 3D models with metadata can be a shared information model for the effective collaborative design. In this paper, railway infrastructure information model is proposed to enable integrated and inter-operable works throughout the life-cycle of the railway infrastructures, from planning to maintenance. In order to develop the model, object-based 3-D models were built for a 10km railway among Korea high-speed railway lines. The model has basically three information layers for designers, contractors and an owner, respectively. Prestressed concrete box-girders are the most common superstructure of bridges. The design information layer has metadata on requirements, design codes, geometry, analysis and so on. The construction layer has data on drawings, real data for material and products, schedules and so on. The maintenance layer for the owner has the final geometry, material data, products and their suppliers and so on. These information has its own data architecture which is derived from similar concept of product breakdown structure(PBS) and work breakdown structure(WBS). The constructed RIIM for the infrastructures of the high-speed railway was successfully applied to various areas such as design check, structural analysis, automated estimation, construction simulation, virtual viewing, and digital mock-up. The integrated information model can realize virtual construction system for railway lines and dramatically increase the productivity of the whole engineering process.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.25-42
• /
• 1999

As todays manufacturers and business organizations are struggling to compete in the global marketplace, they are concentrating on the efficient use of numerous information on design, development production, testing, distribution, and maintenance of products throughout their whole life cycles. To meet these organizations demands on information integration, the CALS has been recently focused as a dominant philosophy. In this paper, we introduce the computer supports for engineering CALS in which the engineering process at an initial phase of product development is simultaneously and collaboratively peformed. The proposed system supports the following functions: a virtual prototyping, a distributed collaborative design, and engineering information management. We have conformed to CORBA (Common Object Request Broker Architecture) standard to support interoperability between distributed objects and have used JAVA to support cross-platform and distributed user access to the system on the Web. Under this system, multidisciplinary design teams in engineering CALS environment can collaboratively perform their tasks, share design information and communicate with each other on the Web.