• 소성∙가공
• /
• 제23권3호
• /
• pp.159-163
• /
• 2014

In the current study, the effect of small surface defects in the starting material including roughness, indentations, or scratches, which are perpendicular to the direction of drawing, on the product quality is investigated using the finite element method. An axisymmetric defect is assumed. Such defects are defined by a cylindrical defect area and two tapered regions connecting the defect area to the non-defective area of the material. Various conditions for these initial surface defects are considered, including defect depth, defect slope and defect length. To describe the plastic deformation of the defect in detail during the simulation, local remeshing is applied. Based on the finite element results, defect disappearance maps were generated. It was found that defect disappearance is significantly dependent on the defect depth and the defect length coupled with the defect slope.

• 대한인간공학회지
• /
• 제23권3호
• /
• pp.53-72
• /
• 2004

Today we are observing a lot of injuries, casualties, and property losses that are mainly caused by the defects of products. In order to derive safety designs, which minimize the possibility of such product liability-related accidents, we need to take into account the user-product interaction as an important part of the danger factor analysis. Existing risk analysis techniques, however, have some limitations in detecting comprehensive danger factors that are peculiarly involved in human errors and the functional defects of products. Researches on danger factor analysis regarding the user-product interaction have been carried out actively in ergonomics. In this paper, we suggest a novel product risk analysis technique, which is more objective and systematic compared to the previous ones, by combining a modified TAFEI (Task Analysis For Error Identification) technique with SASA (Systematic Approach to Accident Scenario Analysis) technique. By applying this technique to the product design practice in industry, corporations will be able to improve the product safety, consequently strengthening the competitiveness.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.130-135
• /
• 1998

One aspect of customer dissatisfaction, safety or more correctly, the lack of product safety has received particular attention in courts and in legislatures, especially in the developed countries. Therefore, many companies have always regarded safety elements as an essential part of product manufacturing. In this paper, the case study on the product safety of infant cosmetics manufactured by a small-medium enterprise is presented. We have focused our study on safety level and control system of product safety, also analyzed the product defects caused by mixing process and all departments. It is found that the product defects(Complaints, Enquiries) is considerably decreased. These results could be used to deal with a product recall which companies hope never happens to them.

• 무역학회지
• /
• 제44권6호
• /
• pp.135-150
• /
• 2019

Under the Manufacturing Liability Act, consumers want to be protected from manufacturers by mitigating burden of proof as an important target to be protected. However, due to the complexity of the product, it is very difficult for consumers to prove defects from the manufacturing defect. This situation has led to a major revision of the Manufacturing Liability Act, which mitigates the burden of proof of consumers by applying fruitless liability. The Manufacturing Liability Act is comparable to the U.S., which has strong consumer rights and is protected by the Manufacturing Liability Act. The burden of proof can be regarded as the most necessary content for consumers within the manufacturing product liability law when responding to manufacturing defects. The U.S. intends to provide implications for achieving consumer protection in Korea's Manufacturing Liability Act by imitating the U.S. based on the burden of proof. Case comparison regarding burden of proof can be conducted based on various criteria, including criteria for each product and key features for determining the importance of the manufacturing product liability law. The Act on the Responsibility of Korean Manufacturing Products for the Protection of Consumers was developed based on the assessment criteria, and a remedy was proposed to protect consumers who suffered from manufacturing defects.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.321-326
• /
• 1998

One aspect of customer dissatisfaction, safety or more correctly, the lack of product safety has received Particular attention in courts and in legislatures, especially in the developed countries. Therefore, many companies have always regarded safety elements as an essential part of product manufacturing. In this paper, the case study on the product safety of infant cosmetics manufactured by a small-medium enterprise is presented We have focused our study on safety level and control system of product safety, also analyzed the product defects caused by mixing process and all departments. It is found that the product defects( Complaints, Enquiries ) is considerably decreased. These results could be used to deal with a product recall which companies hope never happens to them

• 한국가스학회지
• /
• 제7권4호
• /
• pp.30-35
• /
• 2003

제조물책임(Product Liability : PL)이란 제조물의 결함으로 인하여 소비자 또는 제3자의 생명, 신체, 재산 등에 손해가 발생했을 경우 그 제조물의 제조자 또는 판매자 등에게 손해배상 책임을 부과시키는 법으로 국내에서는 제조물책임법은 2002년 7월 시행되었다. 본 연구에서 FMEA를 이용한 화학제품의 제조물책임 대응체계를 구성하였으며, 깍N-Dimethyethylamine을 사례로 적용하여 연구를 진행하였다. 우선 화학제품의 취급설명서 역할을 하는 MSDS(Material Safety Data Sheet)를 통해 제품의 정보를 파악하고, 제품의 결함으로 인한 영향을 분석하는 FMEA기법을 적용하여 결함의 심각도, 결함의 발생빈도 및 검출도의 곱으로 정의된 RPN(Risk Priority Number)에 의하여 위험성을 정량적으로 제시하였다.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.632-632
• /
• 2009

The purpose of this study is to present the range of defects mentioned in the Product Liability (PL) and to establish an objective basis and grounds for the analysis of accidents expected to happen by analyzing and presenting the external flame pattern and electrical characteristics of an LED streetlight lamp, a new lighting lamp. From the analysis of the cross-section of a cable carbonized by an external flame, it was observed that the wire's strand and insulation material had solidly adhered, and that greater voids were formed at the surface than at the center. Irregular carbide lumps were formed in the globe directly exposed to the flame, and the globe carbonized by the indirect flame showed characteristics that they had melted and flowed downward. It was found that the forward and backward resistances of the normal LED were approximately 1.74 [$M{\Omega}$] and 140 [$M{\Omega}$], respectively. The lamp burnt by the strong flame exhibited infinite forward and backward resistances and the LED did not emit light. The carbonized LED lamp was gray and exhibited fine delaminations. According to the Product Liability, a product defect signifies a simple product defect. Most of the defects were caused by the lack of stability, and the defect of the product itself occurred during the design and manufacture. The defects in warnings and markings include an insufficiency of handling manuals and warnings, expressive warranty violations, defective markings, etc. In order to prevent an accident resulting from a product, it is necessary to prepare safety warnings and documentation, establish clear-cut lines of liabilities, and subscribe insurances. However, it could be seen that important factors against the Product Liability were product improvement, response to compensation requests and law suits, credit restoration, etc.

• 산업경영시스템학회지
• /
• 제40권2호
• /
• pp.22-30
• /
• 2017

PL (Product Liability) refers to the legal responsibility of a manufacturer or seller for bodily injuries or property losses caused by product defects. Therefore, it is important for companies to construct a product liability response system that strategically manage and effectively adapt to product liability. A PL response system refers to companywide operations of PL prevention (PLP) measures, product safety (PS) measures, and PL defense (PLD) measures appropriate for a company's scale and environment. To establish an enterprise product liability response system, each essential component of corporations should be systematically operated and maintained considering the scale and characteristics of the corporations. Essential components of PL response system is Strategy, Organization, Training, Technology, Investment, and Awareness. Role of essential components is that companies need specific strategies to secure product safety and protect customers from product defects, and appropriate organizations must be composed for effective operation of such strategies. The objective of this paper seeks to examine the relationships among the essential components of the product liability response system and PL performance. PL performance consists of positive performance and negative performance. In particular, positive performance include increased efforts in product or process innovation such as strengthening research and development (R&D) to produce safer products without defects. In order to carry out this research we obtained 98 questionnaire of manufacturing company. A summary of the analyses is as follows: First, the awareness and technology among essential components affect significantly to the positive performance. Second, the awareness and strategy among essential components negative affect to the negative performance.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.29-34
• /
• 2019

Cell phone injection is characterized by its small size and thinness. In addition, the product has a short cycle time, requiring a very short production schedule. To produce more accurate products faster, data from experience in producing similar products is required. In this study, two mobile phone models are presented. In this study, the quality problems caused by molding analysis and actual injection molding were analyzed and made into a database. As a result, it was considered that all the defects in the molding analysis do not affect the product in some cases, rather than appear as defects in the actual product. All defects shown in the molding analysis can be made into a database, and based on this data, it will be possible to obtain an effect that can predict more accurately whether it will cause problems after injection.

• Journal of Platform Technology
• /
• 제10권3호
• /
• pp.21-29
• /
• 2022

Recently, the scope of the smart factory has been expanded, and process research to minimize the part that requires manpower in many processes is increasing. In the case of detecting defects in the appearance of small products, precise verification using a vision system is required. Reliability and speed of inspection are inefficient for human inspection. In this paper, we propose an algorithm for inspecting product appearance defects using a machine vision system. In the case of the remote control targeted in this paper, the appearance is different for each product. Due to the characteristics of the remote control product, the data obtained using two cameras is compared with the master data after denoising and stitching steps are completed. When the algorithm presented in this paper is used, it is possible to detect defects in a shorter time and more accurately compared to the existing human inspection.