• Title/Summary/Keyword: Processing quality

Search Result 5,625, Processing Time 0.039 seconds

Effect of freezing on electrical properties and quality of thawed chicken breast meat

  • Wei, Ran;Wang, Peng;Han, Minyi;Chen, Tianhao;Xu, Xinglian;Zhou, Guanghong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권4호
    • /
    • pp.569-575
    • /
    • 2017
  • Objective: The objective of this research was to study the electrical properties and quality of frozen-thawed chicken breast meat and to investigate the relationship between these parameters at different times of frozen storage. Methods: Thawed samples of chicken breast muscles were evaluated after being kept in frozen storage at $-18^{\circ}C$ for different periods of time (1, 2, 3, 4, 5, 6, 7, and 8 months). Results: The results showed that water-holding capacity (WHC) and protein solubility decreased while thiobarbituric acid-reactive substances content increased with increasing storage time. The impedance module of samples decreased during 8-month frozen storage. Pearson correlation coefficients showed that the impedance change ratio (Q value) was significantly (p<0.05) related to pH, color, WHC, lipid oxidation and protein solubility, indicating a good relationship between the electrical properties and qualities of frozen-thawed chicken breast meat. Conclusion: Impedance measurement has a potential to assess the quality of frozen chicken meat combining with quality indices.

Effect of fermented blueberry on the oxidative stability and volatile molecule profiles of emulsion-type sausage during refrigerated storage

  • Zhou, Hengyue;Zhuang, Xinbo;Zhou, Changyu;Ding, Daming;Li, Chunbao;Bai, Yun;Zhou, Guanghong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권5호
    • /
    • pp.812-824
    • /
    • 2020
  • Objective: The aim of this work was to assess the effect of fermented blueberry (FB; 2%, 4%, and 6%) on the oxidative stability and volatile molecule profiles of emulsion-type sausage stored at 4℃ for 28 days. Methods: The antioxidant activity of FB was determined through radical-scavenging activity against 2, 2-diphenyl-1-picrylhydrazyl (DPPH) and hydroxyl radicals. Four formulations of sausage treatments with different FB levels (0%, 2%, 4%, 6%) were prepared, then peroxide value (POVs), thiobarbituric acid-reactive substances (TBARS) values, protein carbonyls and thiol groups were measured. The aroma profiles of sausages for each treatment was also determined. Results: The half maximal inhibitory concentration indicated that FB had greater scavenging ability than ascorbic acid against DPPH and hydroxyl radicals. Sausages with FB significantly retarded increases in POVs and TBARS, as well as in the content of protein carbonyls during all storage days (p<0.05). Particularly, 4% and 6% FB-treated sausages had better oxidation inhibition effects. However, FB accelerated the reduction in thiol groups (p<0.05). Additionally, FB inhibits the excessive formation of aldehyde compounds; for example, hexanal, which may cause rancid flavors, decreased from 58.25% to 19.41%. FB also created 6 alcohols (i.e., 2-methyl-1-propanol, 3-methyl-1-butanol, and phenylethyl alcohol), 5 ester compounds (i.e., ethyl acetate, ethyl lactate, and ethyl hexanoate) and 3-hydroxy-2-butanone in the sausages that contribute to sausage flavors. The principal component analysis showed that the aroma profiles of sausages with and without FB are easily identified. Conclusion: The addition of FB could significantly reduce the lipid and protein oxidation and improve oxidative stability for storage. Also, adding FB could inhibit rancid flavors and contribute to sausage flavors.

Developing the Quality Assessment Indicators for the National Processing Statistics of Korea

  • Kim, Soo-Taek;Jeong, Ki-Ho;Kim, Seol-Hee
    • Communications for Statistical Applications and Methods
    • /
    • 제14권3호
    • /
    • pp.649-665
    • /
    • 2007
  • The improvement of quality is a continuous process and one of the main objectives of the Statistical Strategy launched by the Korea National Statistical Office (KNSO) is the enhancement of the quality of Korea national statistics. In this paper, we define the processing statistic, classify the Korea national processing statistics, and develop the quality indicators and check list for assessing the national processing statistics of Korea. During its development, the indicators has been discussed with the processing statistic managers of the KNSO and the checklist tested in a pilot study covering a variety of processing statistic areas.

Effects of Marbling on Meat Quality Characteristics and Intramuscular Connective Tissue of Beef Longissimus Muscle

  • Li, Chunbao;Zhou, Guanghong;Xu, Xinglian;Zhang, Jingbo;Xu, Shuqin;Ji, Yanfeng
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권12호
    • /
    • pp.1799-1808
    • /
    • 2006
  • This study was designed to explore the effects of marbling on meat quality characteristics and intramuscular connective tissue of beef longissimus muscle. Chemical determinations, histological and mechanical measurements were performed on the raw and cooked meat at d 4 postmortem. The results showed that crude fat, collagen, fiber diameter and maximum transition temperature of intramuscular connective tissue increased (p<0.05) with the increase of marbling score. The cooking losses, collagen solubility, WBSF and perimysial thickness decreased (p<0.05) with the increasing marbling. WBSF correlated (p<0.05) with moisture, crude fat, collagen, cooking losses, sarcomere length and perimysial thickness. The development of marbling results in the decline in cooking losses, the avoidance of sarcomere shortening, and the disorganization of the perimysia, which accounts for the improvement of beef tenderness.

처리시간을 고려한 분산시스템의 서비스 품질분석 (QoS Analysis of a Distributed System Considering the Processing Time)

  • 김정호;박종훈
    • 품질경영학회지
    • /
    • 제39권3호
    • /
    • pp.412-421
    • /
    • 2011
  • In this paper, we introduce Quality of Service(QoS) analytic model of a distributed system that decentralizes the process nodes performing each task and communicates through a network for cooperation. The model advances a service reliability model of Dai et a1.(2003) by means of considering the processing time. The service is assumed to be provided by a centralized heterogeneous distributed system which is composed of some subsystems managed by a control center. The QoS is defined as the probability that a service is provided successfully in an allowed time, we consider the hardware/software reliability and the processing time which include program execution time, data transfer time. We derive the processing time distribution for a required service through convolution of corresponding probability density function. An application example is used to explain the procedure of computing quality of service.

전처리 및 건조방법에 따른 가시오갈피생약재의 품질변화 (Quality Changes in Eleutherococcus senticosus Cortex Processed by Different Pretreatment and Drying Method)

  • 정햇님;임상현;김희연;김경대;박유화;함헌주;이광재;김경희;안영섭
    • 한국약용작물학회지
    • /
    • 제18권2호
    • /
    • pp.98-104
    • /
    • 2010
  • Eleuthero(Eleutherococcus senticosus Maxim.) cortex is well known as a herb medicine for tonic. This study was performed to improve the quality of dried E. senticosus cortex. Investigation of quality factor and contents of efficient compounds under different steaming times and drying methods were performed to determine the proper processing and drying conditions of Eleuthero cortex harvested on March in annual stems. The proper steaming time for peeling bark to make high quality Eleuthero cortex took less than 20 mins. Eleutheroside B and E contents among drying methods were significantly different at 5% level DMRT. The $50^{\circ}C$ heat drying was the most advisable condition for drying, when drying and keeping contents of effective compounds.

Effect of different short-term high ambient temperature on chicken meat quality and ultra-structure

  • Zhang, Minghao;Zhu, Lixian;Zhang, Yimin;Mao, Yanwei;Zhang, Mingyue;Dong, Pengcheng;Niu, Lebao;Luo, Xin;Liang, Rongrong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권5호
    • /
    • pp.701-710
    • /
    • 2019
  • Objective: This study investigated the effect of different acute heat stress (HS) levels on chicken meat quality and ultra-structure. Methods: Chickens were randomly divided into 7 groups to receive different HS treatments: i) $36^{\circ}C$ for 1 h, ii) $36^{\circ}C$ for 2 h, iii) $38^{\circ}C$ for 1 h, iv) $38^{\circ}C$ for 2 h, v) $40^{\circ}C$ for 1 h, vi) $40^{\circ}C$ for 2 h, and vii) un-stressed control group ($25^{\circ}C$). Blood cortisol level, breasts initial temperature, color, pH, water holding capacity (WHC), protein solubility and ultra-structure were analyzed. Results: HS temperatures had significant effects on breast meat temperature, lightness ($L^*$), redness ($a^*$), cooking loss and protein solubility (p<0.05). The HS at $36^{\circ}C$ increased $L^*{_{24h}}$ value (p<0.01) and increased the cooking loss (p<0.05), but decreased $a^*{_{24h}}$ value (p<0.05). However, as the temperature increased to $38^{\circ}C$ and $40^{\circ}C$, all the values of $L^*{_{24h}}$, cooking loss and protein denaturation level decreased, and the differences disappeared compared to control group (p>0.05). Only the ultimate $pH_{24h}$ at $40^{\circ}C$ decreased compared to the control group (p<0.01). The pH in $36^{\circ}C$ group declined greater than other heat-stressed group in the first hour postmortem, which contributed breast muscle protein degeneration combining with high body temperature, and these variations reflected on poor meat quality parameters. The muscle fiber integrity level in group $40^{\circ}C$ was much better than those in $36^{\circ}C$ with the denatured position mainly focused on the interval of muscle fibers which probably contributes WHC and light reflection. Conclusion: HS at higher temperature (above $38^{\circ}C$) before slaughter did not always lead to more pale and lower WHC breast meat. Breast meat quality parameters had a regression trend as HS temperature raised from $36^{\circ}C$. The interval of muscle fibers at 24 h postmortem and greater pH decline rate with high body temperature in early postmortem period could be a reasonable explanation for the variation of meat quality parameters.

Onco. Flash Processing 적용에 따른 핵의학 영상의 유용성 평가 (Usefulness in Evaluation of NM Image which It Follows in Onco. Flash Processing Application)

  • 김정수;김병진;김진의;우재룡;김현주;신희원
    • 핵의학기술
    • /
    • 제12권1호
    • /
    • pp.13-18
    • /
    • 2008
  • 목적: 다양한 algorism에 의한 영상처리기법은 핵의학 영상을 결정짓는 중요한 부분을 차지하고 있다. 이에 새로운 영상처리기법인 SIEMENS (made by pixon)사의 Onco. flash processing reconstruction을 적용하여 기존의 영상처리기법을 이용한 영상과 비교 분석함으로써 그 임상적 유용성을 평가한다. 대상 및 방법: 1) Scan speed의 차이에 의한 whole body bone scan을 시행하고, raw data와 processing data의 imaeg quality를 비교 분석하여 상대 평가한다. 2) Bone static scan을 acquisition count를 달리하여 시행하고, raw data와 processing data의 image quality를 비교 분석하여 상대 평가한다. 3) 4 quadrant - bar phantom을 이용하여 raw data와 processing data와의 육안적 평가를 통한 image quality를 확인한다. 4) LSF을 통한 raw data와 processing data의 FWHM을 구하여 해상력 평가를 확인한다. 결과: 1) Whole body bone scan을 시행하여 본원 핵의학 판독의의 blinding test한 결과 scan speed 20 cm/min의 raw data와 30 cm/min의 processing data에는 임상 판독에 영향을 미칠 수준의 image quality 저하가 없었으나, 40 cm/min processing data는 영상 판독과 진단에 오류의 가능성을 배제 할 수 없는 image quality의 향상을 볼 수 없었다. 2) Bone static scan의 경우 200 kcts processing data는 200 kcts raw data보다 확실한 image quality의 향상을 가져왔으며 400 kcts raw data와 비교한 본원 핵의학 판독의 blinding test 결과 판독과 진단에 무리가 없을 수준의 유사한 image quality를 보였다. 3) 4 quadrant - bar phantom을 이용하여 raw data와 processing data와의 육안적 평가는 processing을 통한 image quality의 향상을 확인할 수 있었다. 4) LSF을 통한 raw data와 processing data의 FWHM 평가 결과, resolution의 뚜렷한 증가나 감소의 확인은 할 수 없었다. 이는 noise level의 감소와 high S/N ratio 때문이라 판단된다. 결론: 기존의 영상과 비교 분석하여 평가한 결과 Onco. flash processing reconstruction을 적용한 경우 일정 수준까지 뚜렷한 image quality의 향상을 보였으며, 이는 장비 가동률의 상승과 환자 대기일수의 단축 그리고 저선량 검사에 따른 방사선 피폭에 대한 적극적 방어의 관점에서 현재 임상 핵의학에 충분한 유용성과 타당성이 있을 것으로 사료된다.

  • PDF

반응표면 분석법에 의한 사출공정 및 품질 모니터링에 관한 연구 (A Study on Injection Molding Process and Quality Monitoring by Response Surface Analysis)

  • 민병현;이경돈;우병길
    • 산업공학
    • /
    • 제9권1호
    • /
    • pp.13-24
    • /
    • 1996
  • Quality of injection molded parts is dependent on both mold design and processing conditions. From the mold design point of view, an optimal shrinkage should be used to compensate the shrinkage of molded parts. From the processing point of view, it is important to analyze the priority of processing conditions because a number processing conditions affect the quality of molded parts. Processing analysis employing the design of experiment was performed, and the shrinkage of molded part was considered as a characteristic parameter to improve the quality. As the result of the analysis of variance on SN ratio of a characteristic value, injection speed and bolding pressure were selected as two effective process parameters. Regression analysis on shrinkage and processing conditions was carried out, and an optimal processing condition was obtained by the response surface analysis. Shrinkage at the optimal condition could be used to reduce the number of try-cut at the step of mold making. The ranges of indirect control parameter, such as maximum cavity pressure or weight, measured at the optimal processing condition were used for monitoring the quality of molded parts in process.

  • PDF

Automatic Display Quality Measurement by Image Processing

  • Chen, Bo-Sheng;Heish, Chen-Chiung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.1228-1231
    • /
    • 2009
  • This paper presented an automatic system for display quality measurement by image processing. The goal is to replace human eyes for display quality evaluation by computer vision and get the objective quality review for consumer to make purchase of monitor or TV. Color, contrast, brightness, sharpness and motion blur are the main five factors to affect display quality that could be measured by supplying patterns and analyzing the corresponding images captured from webcam. The scores are calculated by image processing techniques. Linear regression model is then adopted to find the relation between human score and the measured display performance.

  • PDF