• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.407-413
• /
• 2015

In this paper, a DFPA(decimal floating-point adder) designed a pipeline structure that uses a LZA(leading zero anticipator) to reduce critical route to shorten delay to improve the speed of operation processing. The evaluation and verification of performance of proposed DFPA applied the Flowrian tool with simulation and Cyclone III FPGA was set as the target on the Quartus II tool for the synthesis. The proposed method compared and verified to proposed the other method using same input data. As a result, the performance of proposed method is improved 11.2% and 5.9% more than L.K.Wang's method and etc.. Also, it is confirmed that improvement of operation processing speed and reduction of the number of delay elements on critical path.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.260-269
• /
• 2018

The purpose of this study is to interpretate the tools and the method of making wooden artifacts by analyzing the trace of tools on the surface of wooden artifacts estimated to be from the 2nd to the 4th century. As a result of analyzing the trace of tools on the surface of 97 items of wood artifacts, it was confirmed that various tools such as rhizome, chisel, claw, hand knife and ax were used to make these artifacts. Particularly, the marks of the turning knife and the turning lathe were confirmed, and it was found that the method of turning operation was used at this time. In addition, it was confirmed that both the Nunjil (tangential process) and the Seonjil (longitudinal process) were used to produce the wooden container artifacts by turning operation. It observes that proper processing method operation was applied to manufacture wooden container artifact depending on its form and intended use.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2409-2414
• /
• 2002

The surfaces of prototypes become rough due to the stair-stepping which is the inevitable phenomenon in the Rapid Prototypes are not used only for the verification of feature. The grinding, coating, or the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. The solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. the solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the regions for post-processing. the factors to cause the surface roughness and their effects are analyzed through the experiments. Software modules are developed to predict the surface roughness of each face in the prototyping with the result. An experimental compensation method is developed to apply the modules to various RP equipments, materials and build styles. The build direction is searched with use of genetic algorithm to maximize the total areas of the surface of which roughness is better than the user-defined value.

• Journal of Korea Game Society
• /
• v.12 no.4
• /
• pp.23-31
• /
• 2012

The collision processing is one of the essential factors to realize physical principles in the game, and it gives liveliness to the game. The collision processing requires a large amount of operations, and significantly affects the game performance. To address this problem, many studies have been conducted to reduce the operation volume, and the SAP algorithm is being widely used. However, its efficiency is low because it involves repetitive operations. In this study, a distance-based SAP algorithm was proposed to reduce the operation volume for the collision processing and address the problem of the SAP algorithm. A test was conducted to measure the FPS using the simulation program, which was developed with the proposed algorithm. The FPS was 2-33 times higher with the proposed algorithm, which indicated that the efficiency of the collision processing was improved.

• Journal of Applied Reliability
• /
• v.17 no.3
• /
• pp.264-271
• /
• 2017

Purpose: Field operation data contains missing values or outliers due to various causes of the data collection process, so caution is required when utilizing RAM analysis results by field operation data. The purpose of this study is to present a method to minimize the RAM analysis error of the field data to improve the accuracy. Methods: Statistical methods are presented for processing of the outliers and the missing values of the field operating data, and after analyzing the RAM, the differences between before and after applying the technique are discussed. Results: The availability is estimated to be lower by 6.8 to 23.5% than that before processing, and it is judged that the processing of the missing values and outliers greatly affect the RAM analysis result. Conclusion: RAM analysis of OO weapon system was performed and suggestions for improvement of RAM analysis were presented through comparison with the new and current method. Data analysis results without appropriate treatment of error values may result in incorrect conclusions leading to inappropriate decisions and actions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.1-7
• /
• 2021

The deep learning image processing technique was used to prevent accidents in lathe work caused by worker negligence. During lathe operation, when the chuck is rotated, it is very dangerous if the operator's hand is near the chuck. However, if the chuck is stopped during operation, it is not dangerous for the operator's hand to be in close proximity to the chuck for workpiece measurement, chip removal or tool change. We used YOLO (You Only Look Once), a deep learning image processing program for object detection and classification. Lathe work images such as hand, chuck rotation and chuck stop are used for learning, object detection and classification. As a result of the experiment, object detection and class classification were performed with a success probability of over 80% at a confidence score 0.5. Thus, we conclude that the artificial intelligence deep learning image processing technique can be effective in preventing incidents resulting from worker negligence in future manufacturing systems.

• Corrugated packaging logistics
• /
• v.5 no.20
• /
• pp.131-144
• /
• 1997

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.189-196
• /
• 2012

A WAVE(Wireless Access for Vehicular Environment) system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. However, the scrambler bit operation of WAVE system becomes less efficient in the organizations of software and hardware design because the parallel processing is impossible. Although scrambler algorithm proposed in this paper has different processing speed depending on input data 8 bit, 16 bit, 32 bit, and 64 bit. it improves the processing speed of the operation because it can make parallel processing possible depending on the input unit.

• Journal of Information Processing Systems
• /
• v.14 no.2
• /
• pp.396-417
• /
• 2018

GR-tree and query aggregation techniques have been proposed for spatial query processing in conventional spatial query processing for wireless sensor networks. Although these spatial query processing techniques consider spatial query optimization, time query optimization is not taken into consideration. The index reorganization cost and communication cost for the parent sensor nodes increase the energy consumption that is required to ensure the most efficient operation in the wireless sensor node. This paper proposes itinerary-based R-tree (IR-tree) for more efficient spatial-temporal query processing in wireless sensor networks. This paper analyzes the performance of previous studies and IR-tree, which are the conventional spatial query processing techniques, with regard to the accuracy, energy consumption, and query processing time of the query results using the wireless sensor data with Uniform, Gauss, and Skew distributions. This paper proves the superiority of the proposed IR-tree-based space-time indexing.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.544-547
• /
• 2007

Because data processing systems in recent years are more complicated, main function of the data processing is divided as several sub-functions which are implemented and verified in each subsystem of the data processing system. For the verification of data processing system, many interface tests among subsystems are required and also a lot of simulation systems are demanded. This paper proposes CTHS (Common Test Harness System) for satellite ground segment development which has all of functions for interface test of the data processing system in one PC. Main functions of the CTHS software are data interface, system log generation, and system information display. For the interface test of the data processing system, all of actions of the CTHS are executed by a pre-defined operation scenario which is written by purpose of the data processing system test.