• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.26-31
• /
• 2007

Manufacturing bulk nanostructured materials with least grain growth from initial powders is challenging because of the bottle neck of bottom-up methods using the conventional powder metallurgy of compaction and sintering. In this study, bottom-up type powder metallurgy processing and top-down type SPD (Severe Plastic Deformation) approaches were combined in order to achieve both real density and grain refinement of metallic powders. ECAP (Equal Channel Angular Pressing), one of the most promising processes in SPD, was used for the powder consolidation method. For understanding the ECAP process, investigating the powder density as well as internal stress, strain distribution is crucial. We investigated the consolidation and plastic deformation of the metallic powders during ECAP using the finite element simulations. Almost independent behavior of powder densification in the entry channel and shear deformation in the main deformation zone was found by the finite element method. Effects of processing parameters on densification and density distributions were investigated.

• 소성∙가공
• /
• 제32권2호
• /
• pp.92-99
• /
• 2023

In this study, shear fracture specimens are designed using finite element analyses for the characterization of ductile fracture criteria of metal sheets. Many recently suggested ductile fracture criteria require experimental fracture data at the shear stress states in the model parameter identification. However, it is challenging to maintain shear stress states in tension-based specimens from the initial yield to the final fracture, and the loading path can be different for the different materials even with the same shear specimen geometries. To account for this issue, two different shear fracture specimens for low ductility/high ductility metal sheets are designed using the sensitivity tests conducted by finite element simulations. Priorly mechanical properties including the Hosford-Coulomb fracture criterion of the aluminum alloy 7075-T6 and DP590 steel sheets are used in the simulations. The results show that shear stress states are well-maintained until the fracture at the fracture initiation points by optimizing the notch geometries of the shear fracture specimens.

• 소성∙가공
• /
• 제33권3호
• /
• pp.208-213
• /
• 2024

Ni-based superalloys have exceptional performance in high-temperature strength, corrosion resistance, etc, and it has been widely used in various applications that require corrosion resistance at high-temperature operations. However, the relatively expensive cost of the Ni-based superalloys is one of the major hurdles. The corrosion-resisted alloy(CRA) clad materials can be a cost-effective solution. In this study, finite element analysis of the hot rolling process for manufacturing of the Alloy 625/API X65 steel CRA clad plates is conducted. The stress-strain curves of the two materials are measured in compressive tests for various temperature and strain rate conditions, using the Gleeble tester. Then, strain hardening behavior is modeled following the modified Johnson-Cook model. Finite element analysis of the hot rolled cladding process is performed using this strain rate and temperature dependent hardening model. Finally, the thickness ratio of the CRA and base material is predicted and compared with experimental values.

• 한국지반공학회지:지반
• /
• 제8권1호
• /
• pp.7-18
• /
• 1992

실험으로 측정란 변위와 3차원 경계면 요소를 도입하여 판 구조물과 지반의 상호 작용문제를 해석한 수직변위를 비교한 결과 다음과 같은 결론을 얻었다. 1. 경계면 요소를 도입하므로써 판 구조물과 지반 모두를 유한요소로 분할하여 상호작용문제를 해석할 수 있다. 2. 경계면 요소를 도입하므로써 판 구조물과 지반 상호작용문제의 해석에서 지반반력 계수를 필요로 하지 않는다. 3.경계면 요소를 도입하므로써 판 구조물과 지반 상호작용문제의 해석에서 지중의 변위를 구하기 위한 후처리 과정이 필요 없다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.219-220
• /
• 1998

Although a single-element synthetic aperture system can produce high-resolution beam profile, it is not a highly practical system because of its low signal to noise ratio against conventional system's. A multi-element synthetic aperture processing has been proposed with defocusing in this paper. A multi element subaperture defocused to emulate a single element spatial response with high acoustic power. The results have higher signal to noise and better contrast resolution than conventional synthetic aperture method.

• 소성∙가공
• /
• 제5권1호
• /
• pp.55-60
• /
• 1996

In the finite element analysis of metal forming processes the updated Lagrangian approach has been widely and effectively used to simulate the non-steady state problems. however some difficulties have arisen from abrupt flow change as in extrusion through square dies. In the present work an ALE(arbitrary Lagrangian-Euleria) finite element formulation for deforma-tion analysis are presented fro rigid-viscoplastic materials. The developed finite element program is applied to the isothermal analysis of square die extrusion of a square section. The computational results are compared with those by the updated Lagrangian finite element analysis.

• 소성∙가공
• /
• 제24권3호
• /
• pp.161-166
• /
• 2015

The finite element method has been widely used in the analysis of ring rolling. For ring rolling it requires a high computational expense due to the non-steady state material flow characteristics of the process. The high computational expense causes the finite element analysis to be impractical for industrial applications. In the current study, we aim to develop a practical implicit finite element modeling method for ring rolling. This method uses a step-wise steady state assumption and is called the “Stepped method”. The stepped method divides the whole process time of unsteady-state flow model into a finite number of steady-state models. It then solves the process at several specific time steps until convergence is reached. In order to confirm the performance and validity of the newly proposed stepped method, the result from the stepped method were compared to the results from a Lagrangian finite element method and to results from experiments reported in the literature.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.183-186
• /
• 2011

본 논문에서는 모바일 초음파(mobile ultrasound) 영상신호의 빔포밍 알고리즘에서 요구되는 고성능 및 저전력을 만족시키는 매니코어 프로세서에 대한 디자인 공간 탐색 방법을 소개한다. 매니코어 프로세서의 디자인 공간 탐색을 위해 매니코어의 각 프로세싱 엘리먼트(Processing Element, PE)당 초음파 영상신호 데이터의 수를 변화시키는 실험을 통해 실행시간, 에너지 효율 및 시스템 면적 효율을 측정하고, 측정된 결과를 바탕으로 최적의 매니코어 프로세서 구조를 선택하였다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 춘계학술발표대회 논문집
• /
• pp.40-44
• /
• 2005

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.262-267
• /
• 2003

At process of production according to development of accumulation degree of semi-conductor element, because functional mistake examination time required increases, is becoming big obstacle factor in cost-cutting. Studied pattern generator that generate pattern and address that is bundle enemy to process these controversial point effectively.