• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.507-512
• /
• 2004

Research that establish new cadastral survey model that use GPS to introduce GPS observation technique in cadastral survey and research that develop connection technologies are gone abuzz. The purpose of this research is to keep in step in such trend and grasp present condition and performance of surveying connection to common use GPS data processing software, and analyze data processing algorithm, and develop suitable GPS data processing software in our real condition regarding GPS data processing and result of control point calculation. This research studies analysis common use software and error occurrence by data processing method that college and company have. Also, It analyzes algorithm that is applied to existing GPS data processing software. After that we study algorithm that is most suitable with cadastral survey and then develop cadastral survey calculation software for new cadastral control points

• 제어로봇시스템학회논문지
• /
• 제20권1호
• /
• pp.37-41
• /
• 2014

FFT (Fast Fourier Transform) has been widely used in various fields such as image processing, voice processing, physics, astronomy, applied mathematics and so forth. Much research has been conducted due to the importance of the FFT and recently new FFT algorithms using a GPU (Graphics Processing Unit) have been developed for the purpose of much faster processing. In this paper, the new optimal FFT algorithm using the Pease FFT algorithm has been proposed reflecting the hardware configuration of a GPGPU (General Purpose computing of GPU). According to the experiments, the proposed algorithm outperformed by between 3% to 43% compared to the CUFFT algorithm.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.393-397
• /
• 2005

When a real-time image processing application is implemented with a general-purpose computer, CPU (Central Processing Unit) is usually heavily loaded and in many cases that CPU alone cannot meet the real-time requirement at all. Most modern computers are equipped with powerful Graphics Processing Units (GPUs) to accelerate graphics operations. There is a trend that the power of GPU outgrows that of CPU. If we take advantage of the powerful GPU for more general operations other than pure graphics operations, the processing time can be reduced. In this study, we will present techniques that apply GPU to general operations such as image processing procedures. Our experiment results show that significant speed-up can be achieved by using GPU.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.27-31
• /
• 2005

Vehicle detector system based on image processing technology is a significant domain of ITS (Intelligent Transportation System) applications due to its advantages such as low installation cost and it does not obstruct traffic during the installation of vehicle detection systems on the road[1]. In this paper, we propose architecture for vehicle detection by using image processing. The architecture consists of two main parts such as an image processing part, using high speed FPGA, decision and calculation part using CPU. The CPU part takes care of total system control and synthetic decision of vehicle detection. The FPGA part assumes charge of input and output image using video encoder and decoder, image classification and image memory control.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권3호
• /
• pp.309-316
• /
• 2011

This paper deals with the experimental study of the vibration suppression of the smart structures. First, a new high-speed active control system is presented using the DSP320C6713 microprocessor. A peripheral system developed is composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA 95 for fast data processing. Next, the processing time of the peripheral device is tested and the corresponding test results are provided. Since fast data processing is very important in the active vibration control of the structures, achieving the fast loop times of the control system is focused. The control algorithm using PPF in addition to FIR filter is implemented. Finally, numerous experiments were carried out on the aluminum plate to validate the superior performance of the vibration control system at different control loop times.

• Journal of Biosystems Engineering
• /
• 제25권4호
• /
• pp.301-310
• /
• 2000

An autonomous tractor system was developed and its performance was evaluated. The system consisted of a tractor system of and a remote control station. The tractor and the remote control station communicated each other via wireless modems. The tractor had a DGPS(differential global positioning system), sensors, a controller and a modem. The DGPS collected position data and the tractor status was estimated. The information of tractor status and sensors was transferred to the remote control station. Then, the control station determined the control data such as steering angles using a fuzzy controller. The fuzzy controller used the information from the DGPS, sensors, and GIS(geographic information system) data. The control data were obtained by remote signal processing at the control station The control data for autonomous operation were transferred to the tractor controller. The performances of an autonomous tractor were evaluated for various speeds, different initial positions and different initial headings. About 1.3 seconds of time lag was occurred in transferring the tractor status data and the control data. Compensation the time lag, about 27cm deviation was observed at the speed of 0.5m/s and 37cm at the speed of 1m/s. Error caused mainly by the time lag and it would be reduced by developing a full-duplex radio module for controlling the remote tractor.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.691-697
• /
• 1999

This paper describes the implementation of a high speed image processing board. This image processing board is consist of a image acquisition part and a image processing part. The image acquistion part is digitizing the image input data from CIS and save it to the dual port RAM. By putting on the dual port memory between two parts, during acquistion of image, the image processing part can be effectively processing of large-volume image data. Most of all image preprocessing part are integrated in a large-scaled FPGA. We arwe using ADSP-2181 of the Analog Device Inc., LTD. for a image processing part, and using the available all memory of DSP for the large-volume image data. Especially, using of IDMA exchanges the data with the external microprocessor or the external PC, and can watch the result of image processing and acquired image. Finally, we show that an implemented image processing board used for the simulation of image retreval by the one of the typical application.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.588-588
• /
• 1991

This paper proposes a compliance robot control algorithm using fuzzy adaptive controller and fuzzy compliance vector generator. In the compliance robot control, we need more adaptivity because the linear modeling in robot dynamics is getting more difficult by contact with external environment. Existing adapitive controllers have difficulty in realtime processing. So in order to overcome it, We adopt fuzzy adaptive controller and propose fuzzy compliance vector generator for flexible compliant motion. We analyze and confirm the proposed algorithm by surface processing experiment with a control system implemented by VME system.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.137-140
• /
• 2001

In this paper, Fuzzzy Digital PI+D Controller plans for load, noise, plant change, Fuzzy Controller makes use of simple four rule and membership function, and plant used three phase Induction Motor. Characteristic of system compared from experimentation respectively the proposed Control System, Digital PID Control and Digital PI+D Control System.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.145-148
• /
• 2003

In this paper an nonlinear neuro PID controller is constructed by the control system of general PID controller using a Self-Recurrent Neural Network. And the games of the PID controller in the proposed control system are automatically adjusted by back-propagation algorithm of the neural network. Applying to the position control system, it's performance is verified through the results of computer simulation.