• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.351-356
• /
• 2007

The objective of this study was to develop a rapid and reliable method for the sex determination of beef using the PCR(polymerase chain reaction) technique. We have used two bovine sex determining genes, SRY and ZFY, on the Y-chromosome to identify the sex of Hanwoo and Holstein beet. We attempted to amplify 1,348 bp and 979 bp fragments from male and female genomic DNA corresponding to the SRY and ZFY genes, respectively, using male specific primers. The amplified PCR products were separated by electrophoresis in a 1.5% agarose gel to detect a male specific DNA band. When DNA from male beef was amplified with primers specific for the SRY gene, a DNA band of 1,348 bp was present in all of the male samples, but absent from all of the female samples. Also, when DNA from male beef was amplified with primers specific for the ZFY gene, a DNA band of 979 bp was observed in all of the male samples, but absent from all female samples. In conclusion, the bovine SRY and ZFY genes are typically found only in male beef. For the practical application of this method for the sexing of commercial beef at the processing and marketing stages after slaughter. a total of 350 beef samples collected randomly from local markets were analyzed for sex determination. The proportions of male and female samples were 252 (72%) and 98 (28%), respectively. Therefore. the SRY and ZFY genes. which are specific for the Y-chromosome, may be useful sex-diagnostic DNA markers to distinguish male meat from female meat.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.05a
• /
• pp.267-272
• /
• 2000

본 연구에서는 한국어의 사·피동문을 실어증 환자가 처리하는 양상에 대하여 살펴보았다. 한국어의 사·피동문은 용언에 파생접사가 붙어 이루어지는 경우와 '-게 하다'나 '-어 지다'와 같이 구문 변형으로 하여, 실어증 환자에게 실험을 하였다. 실험에 참여한 환자는 명칭성 실어증 환자, 이해성 실어증 환자, 표현성 실어증 환자, 전반성 실어증 환자로 구성되어 있다. 본 실험에서는 단어 채워 넣기 과제(word completion task)를 사용하였다. 명칭성 실어증 환자의 경우 피동에서는 처리 오류를 보이는 반면, 사동에는 아무런 문제도 보이지 않았다. 표현성 실어증 환자의 경우, <피동-비변형>에서 오류를 많이 보였다. 이를 통해 한국어의 사·피동은 영어와 달리 통사상의 문제가 아니라는 결론을 내릴 수 있다. 즉 이미 사·피동 접사에 의해 파생된 단어가 어휘부에 저장되어 있고, 각 단어의 논항 정보에 따라 문장이 생성되는 것이다. 표현성 실어증 환자가 피동의 비변형에서 지배적인 오류를 보이는 것은 피동의 비변형이 타동사로서 변형인 피동형에 비해 하나의 논항을 더 취하기 때문이다. 이해성 실어증 환자의 경우 사·피동 생성에 별 어려움을 보이지 않았다. 이는 이해성 실어증 환자가 개별 어휘의 논항 정보에 손실을 적게 입고 있음을 시사하는 결과이다. 본 연구에서는 서로 다른 유형을 보이는 환자들을 대상으로 한국어의 사·피동의 처리양상을 대조한 결과, 첫재 사·피동은 서로 다른 통사, 의미상의 처리 양상을 보이고 있고, 둘째 파생접사가 결합된 형태로 어휘부에 저장되어 있는 개별 사·피동사에 의해 형성되는 것임을 확인하였다.d CO2 quantity causes flame temperature to fall since at high strain retes diluent effect is prevailing and at low strain rates the products inhibits chain branching. It is also found that the contribution of NO production by N2O and NO2 mechanisms are negligible and that thermal mechanism is concentrate on only the reaction zone. As strain rate and CO2 quantity increase, NO production is remarkably augmented.our 10%를 대용한 것이 무첨가한 것보다 많이 단단해졌음을 알 수 있었다. 혼합중의 반죽의 조사형 전자현미경 관찰로 amarans flour로 대체한 gluten이 단단해졌음을 알수 있었다. 유화제 stearly 칼슘, 혹은 hemicellulase를 amarans 10% 대체한 밀가루에 첨가하면 확연히 비용적을 증대시킬 수 있다는 사실을 알 수 있었다. quinoa는 명아주과 Chenopodium에 속하고 페루, 볼리비아 등의 고산지에서 재배 되어지는 것을 시료로 사용하였다. quinoa 분말은 중량의 5-20%을 quinoa를 대체하고 더욱이 분말중량에 대하여 0-200ppm의 lipase를 lipid(밀가루의 2-3배)에 대하여 품질개량제로서 이용했다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.640-650
• /
• 2020

Objective: Although the slaughter of cull sows (CS) for human consumption and meat products processing appears quite common throughout the world, relatively limited scientific information regarding the meat quality parameters of this pork type is available. The present study aimed at providing the technological quality characteristics and eating quality of CS meat, and comparing with those of commercial pork. Methods: Longissimus thoracis et lumborum muscle samples of CS and finisher pigs (FP) at 24 h postmortem were collected and used for investigation of the meat quality traits (pH, color, shear force, cooking loss, water holding capacity), fatty acids, flavor compounds and sensory characteristics. Results: The CS meat had significantly higher moisture content (p = 0.0312) and water holding capacity (p = 0.0213) together with lower cooking loss (p = 0.0366) compared to the FP meat. The CS meat also exhibited higher (p = 0.0409) contents of unsaturated fatty acids, especially polyunsaturated fatty acids (PUFA, p = 0.0213) and more desirable PUFA/total saturated fatty acids ratio (p = 0.0438) compared to the FP meat. A total of 56 flavor compounds were identified, amongst the amount of 16 compounds differed significantly between the two pork groups. Most of the PUFA-derived flavor compounds (e.g., hexanal, benzaldehyde, and hydrocarbons) showed higher amounts in the CS meat. While, 3-(methylthio)-propanal and 4-methylthiazole associated with pleasant aromas (meaty and roast odor notes) were only found in the FP meat. Furthermore, no differences were reported by panelists for flavor, juiciness, tenderness, and acceptability scores between the two pork groups studied. Conclusion: The sow meat exhibited better technological quality and its eating quality could be comparable to the commercial pork. This study provides meat processors and traders with valuably scientific information which may help to improve the utilization and consumption level of sow meat.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.583-592
• /
• 2006

Software development based on product lines has been proved a promising technology that can drastically reduce cycle time and guarantee quality by strategically reusing quality core assets that belong to an organization. However, how to measure within a product line is different from how to measure within a single software project in that we have to consider the aspects of both core assets and projects that utilize the assets. Moreover, the performance aspects of overall project lines need to be considered within a product line context. Therefore, a systematic approach to measure the performance of product lines is essential to have consistent, repeatable and effective measures within a product line. This paper presents a context-based measurements elicitation approach for product lines that reflects the performance characteristics of product lines and the diversity of their application. The approach includes both detailed procedures and work products resulting from implementation of the procedures, along with their templates. To show the utility of the approach, this paper presents the elicited measurements, especially for technical management practices among product line practices. This paper also illustrated a real application case that adopt this approach. The systematic approach enables management attributes, i.e., measurements to be identified when we construct product lines or develop software product based on the product lines. The measurements will be effective in that they are derived in consideration of the application context and interests of stakeholders.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.947-956
• /
• 2005

Software(S/W) reengineering is one of the effective technologies to produce a business worth and en and the S/W ROI continuously. In spite of, S/W reengineering has been recognized a cost-consumptive works with inefficient productivity. In fact we have used to transform to confusion system with destructive system architecture by extending and updating legacy system in a temporary expedients. Moreover it is impossible to provide the time-market products for coping with rapid changeable system environment and meeting to complicated customer's requirements. Therefore, we need a systematic reengineering methodology to fulfill the changeable environment, as appearance of new IT techniques, various alteration of business information model, and increment of business logic. Legacy systems can be utilized as the core property in business organization through reengineering methodology. In this paper, we target to establish the reengineering process, proposed MaRMI-RE consisting of initial Planning phase, reverse engineering and component transformation phase. To describe the MaRMI-RE, we presented the concrete tasks and techniques and artifacts per individual phase in process, and the case study is showed briefly.

• Composites Research
• /
• v.12 no.5
• /
• pp.31-39
• /
• 1999

Glass-fiber reinforced polymeric composites provide the desitable properties of high stiffness and strength as well as specific weight. Hence, they have become some of the most important materials in several industries. These composites can be grouped into thermoplastic and thermoset composites, with thermoplastic composites having several advantages over thermoset composites in mechanical properties and processing. As a result, the study of the material behavior and forming techniques of such composites has attracted considerable attention in recent years. When the continuous fiber-reinforced polymeric composites are molded by flow molding, the molded parts leads to be nonhomogeneity and anisotropic because of the separation and orientation of fibers. As the characteristics of the products are greatly dependent on the separation, it is very important to clarify the separation in relarion to molding conditions, fiber mat structures and mold geometry. In this study, the effects of the mold geometry and the fiber mat structure on the compression moldability are studied using the cup-type molding.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.47-58
• /
• 2001

For finding both ways of recycling the wood and plastic wastes and solving the problem of free formaldehyde gas emission through manufacturing wood particle-polypropylene fiber composite board without addition of formaldehyde-based thermosetting resin adhesive, control particleboards and nonwoven web composite boards from wood particle and polypropylene fiber formulation of 50 : 50, 60 : 40, and 70 : 30 were manufactured at density levels of 0.5, 0.6, 0.7, and 0.8 g/$cm^3$, and were tested both in the physical and mechanical properties according to ASTM D 1037-93. In the physical properties, control particleboard had significantly higher moisture content than composite board. In composite board, moisture content decreased with the increase of target density only in the board with higher content of polypropylene fiber and also appeared to increase with the increase of wood particle content at a given target density. Control particleboard showed significantly greater water absorption than composite board and its water absorption decreased with the increase of target density. In composite board, water absorption decreased with the increase of target density at a given formulation but increased with the increase of wood particle content at a given target density. After 2 and 24 hours immersion, control particleboard was significantly higher in thickness swelling than composite board and its thickness swelling increased with the increase of target density. In composite board, thickness swelling did not vary significantly with the target density at a given formulation but its thickness swelling increased as wood particle content increased at a given target density. Static bending MOR and MOE under dry and wet conditions increased with the increase of target density at a given formulation of wood particle and polypropylene fiber. Especially, the MOR and MOE under wet condition were considerably larger in composite board than in control particleboard. In general, composite board showed superior bending strength properties to control particleboard, And the composite board made from wood particle and polypropylene fiber formulation of 50 : 50 at target density of 0.8 g/$cm^3$ exhibited the greatest bending strength properties. Though problems in uniform mixing and strong binding of wood particle with polypropylene fiber are unavoidable due to their extremely different shape and polarity, wood particle-polypropylene fiber composite boards with higher performance, as a potential substitute for the commercial particleboards, could be made just by controlling processing variables.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.158-175
• /
• 2001

The purpose of this study was to understand and improve the clothing habits and the apparel industry of North Korea in preparation for the reunification of South and North Korea. For this study, literary data, reports, periodicals, interviews and internet data of the two Koreas were reviewed. North Korean clothing habits used to be monotonous and uniform but nowadays people's clothes have become somewhat brighter in color and more diverse in design than before. In particular, liberal and individual dressing habits appeared among the privileged classes. When taking part in national events, women have to wear the traditional Korean costume, Hanbok, while men wear business suits for formal wear. In general, men don't wear Hanbok. Students have to be in uniforms but blue jeans, T-shirts with English logos were popular among them reflecting their sensitivity and openness towards western cultures. The brides usually wear pink Hanboks and the bridegrooms wear black business suits for their wedding. North Koreans also wear Hanbok on national holidays like South Koreans. Clothing is the most important item in the trade of process commission between North and South Korea. Trading items are mid to low end men's clothing for the most part due to less emphasis on fashion in the North. The processing is indirect trade and composed of sample making and contracting, sending out materials and production, carrying in goods and setting accounts. To activate South-North trade, establishment of infrastructure, stabilization of shipping, reducing high costs of distribution, building direct communication system by setting up office in a neutral zone and simplifying procedures in applying for the South and North Korea Economic Cooperation Fund. On the other hand, clothing and textiles education is carried on at art colleges, light industries colleges and commercial colleges in Pyongyang. Clothing institutes which study Hanbok and Western clothes, are installed in each city and province. Graduates who majored in clothing and textiles are posted in institutes or apparel factories. Their job is designing, patternmaking and sewing for their customers. Most of them are women and in good state of economic conditions. The North Korean clothing industry has been the core national industry that has developed based on overseas demand form the mid 1980s. The standard is that of South Korea in the early 1980s. In 1999, trade of North Korean textile products with trade counterparts such as Japan and China was $1.3 million in exports and $1.27 in imports. Of this amount the export takes up 25.4% of the total exports in North Korea. However, fundamentally even in sectors that are irrelevant to politics such as the fashion clothing industry, trust between the South and North should be a prerequisite. Only through this can exchange between North and South and economic cooperation contribute towards the reunification.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.6
• /
• pp.221-228
• /
• 2018

With an increase in demand for the high added value of shipbuilding and marine industry based on the information and communications technology (ICT), software technology has become more important than ever in the industry. In this paper, we present the result of our preliminary investigation on the current software development environment in the shipbuilding and marine industry in order to develop reusable software component, which can enhance the competitiveness of software development. The investigation is performed based on the survey answers from 34 developers who are working in different shipbuilding and marine companies. The questionnaire is composed of items to gather the information of each company such as the number of employees and product domain, and actual software development environment such as operating system, programming languages, deployment format, obstacles for developing components, and the adoption of software development methods and tools. According to the results of the survey, the most important consideration to select their development platform was the number of available utilities and the technical supports, followed by performance, price and security problems. In addition, the requirements of various platforms supporting and the higher reliability, and the limitations of low development cost and manpower made it difficult for them to develop reusable software components. Finally, throughout the survey, we find out that only 15% of developers used software development processes and managed the quality to systematically develop their software products, therefore, shipbuilding and marine companies need more technical and institutional support to improve their ability to develop high qualified software.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.133-142
• /
• 2014

Recently, more focus is shift to imbalances in aggregate market supply and demand and an exhaustion of natural resources. In this situation, Electric arc furnace oxidizing slag (EAF Slag) has high application possibility as aggregate for concrete due to similar property with general aggregate. In this study, We've got the plan to assure the chemical stability of EAF Slag, and then experimentally tested the mechanical performance and durability for the fine aggregate used EAF Slag. On this test result, we suggest the application plan. At the result of this study, it shows that EAF slag would reduce the surface defect such as pop-out due to natural aging for the fixed hour and adjustment the grain size of EAF Slag. And mechanical performance and durability according to the replacement rate of concrete service, were revealed more than equal or equal compare to general aggregate. Hereafter, quality control must precede not to impede the beauty of concrete surface as assure the safety for aging and processing. And, to establish the environmental resource recycling system for by-products of steel, it should be made development of various application and guideline of quality control for the EAF slag aggregate. Moreover, it must be constantly studied all kind of engineering performance and durability for related to this study.