• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.69-76
• /
• 2005

Recently, application of arc welding to galvanized carbon steel sheet is on the increasing Ould in the fields of automobile and construction industries. In arc welding process, zinc is evaporated in weld pool, even under the appropriate welding condition and produce blowhole and/or pit. Zinc gas cause instability of arc and increase spatter and fume. This research is purposed to minimize the heat-input and the formation of porosities in the welded joint of the galvanized carbon steel sheet using variable polarity AC wave pulse MIG welding system. An appropriate welding condition which showed low spatter and good bead appearance was acquired by applying the AC pulse MIG welding machine to DC duplicated MIG welding with the solid wire. When oxygen gas was added to shield gas of MIG welding for galvanized steel sheet, arc length was increased and arc stability was improved. In the AC duplicated welding, the loss of galvanized layer was decreased as the amount of heat-input was decreased when the EN ratio was increased under the condition that average welding current was evenly set.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.126-133
• /
• 2013

This paper presents a study on the dispersion effect of the X-Ray diffraction, glass transition and DMA properties of organic modifier clay/epoxy nanocomposites produced in a homogenizer. Several experiments were conducted including different types of dispersion condition with varying processing conditions such as homogenizer rotor speed and applied time of homogenizer. The effects of these variables on the dispersion properties of nanocomposites were then studied. In order to fully understand the experimental results, a X-ray diffraction, DSC and DMA were used to investigate the effect of above mentioned variables on microstructure and intercalation/exfoliation of organic modifier clay/epoxy nanocomposites. The results from this work could be used to determine the best processing condition to obtain appropriate levels of d-spacing, glasss transition temperature and storage modulus in organic modifier clay/epoxy nanocomposites.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.180-182
• /
• 2007

The present study was carried out to investigate how two languages are represented and processed for the late Korean-English bilinguals. To this end, we compared the naming times of Korean-English bilinguals on a series of the picture-word interference tasks. The entire experiment is divided into four parts, each of which required participants to name the pictures in Korean or in English with distractor words visually presented either in Korean or English. The distractor words were semantically related or unrelated to the picture. The results showed that, in different language conditions (L1 naming-L2 distractor, L2 naming - L1 distractor), there was only numerical difference between semantic related and unrelated condition. In same language conditions (L1 naming-L1 distractor, L2 naming-L2 distractor), however, significant semantic interference effect occurred. And, the interference effect was stronger in the L1 distractor condition than in the L2 distractor condition. These results suggest that the semantic processing of L1 and L2 for the late bilinguals are independent each other.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1127-1133
• /
• 2022

Recently, the use of aircraft structures using Ti alloy (Ti-6Al-4V), a lightweight high-strength alloy material, is rapidly increasing due to the weight reduction of aircraft. However, high-strength materials such as Ti alloys require high energy for cutting and are classified as difficult-to-cut materials. Also, research on Laser Assisted Machining (hereinafter referred to as LAM), a cutting processing technology that utilizes improved machinability, is being actively researched. Therefore, in this paper, in order to confirm the proper temperature distribution using a laser, the finite element method is used to determine the temperature distribution according to the calorific value condition to derive the appropriate condition, and the thermal load generated at this time is used as a structural analysis. It is intended to be used as basic data for LAM processing conditions by measuring the amount of residual stress and thermal deformation caused by heat.

• 소성∙가공
• /
• 제32권4호
• /
• pp.208-214
• /
• 2023

This paper discusses the deformation characteristics of a scaled-down automotive outer door panel with vacuum-assisted incremental sheet forming. The vacuum condition between the die and Al6052-H32 sheet with a thickness of 1.0 mm is reviewed with the goal of improving the geometrical accuracy of the target product. The material flow according to the forming tool path, including the multi-tool path and conventional contour tool path, is investigated considering the degradation of the pillow effect. To reduce friction between the tool and the sheet during incremental forming, automotive engine oil (5W-30) is used as a lubricant, and the strain field on the surface of the formed product is analyzed using ARGUS. By comparing the geometry and material flow characteristics of products under different test conditions, it is confirmed that the product surface quality can be significantly improved when the vacuum condition is employed in conjunction with a multi-tool path strategy.

• International journal of advanced smart convergence
• /
• 제3권1호
• /
• pp.15-19
• /
• 2014

This study was compared the variation system of body posture condition for stability by the posture. We used a model of bio parameter on the basis of the move state in the standing posture. We compared the sway movement derived from average of the physical sensing condition. Vision condition of variation average (Vi-${\sigma}_{AVG-AVG}$) was verified slightly greater at $13.746{\pm}4.05$ unit. Vestibular condition of variation average (Ve-${\sigma}_{AVG-AVG}$) was verified slightly larger at $7.829{\pm}1.071$ unit. Somatosensory condition of variation average (So-${\sigma}_{AVG-AVG}$) was verified slightly smaller at $2.592{\pm}0.538$ unit. CNS condition of variation average (C-${\sigma}_{AVG-AVG}$) was verified slightly larger at $0.46{\pm}0.105$ unit. The valuation system will be to deduce the model of body management with falling and stroke and all that sort of things. There will be to infer a data algorithm and the evaluation of processing system.

• 한국약용작물학회지
• /
• 제18권2호
• /
• pp.98-104
• /
• 2010

Eleuthero(Eleutherococcus senticosus Maxim.) cortex is well known as a herb medicine for tonic. This study was performed to improve the quality of dried E. senticosus cortex. Investigation of quality factor and contents of efficient compounds under different steaming times and drying methods were performed to determine the proper processing and drying conditions of Eleuthero cortex harvested on March in annual stems. The proper steaming time for peeling bark to make high quality Eleuthero cortex took less than 20 mins. Eleutheroside B and E contents among drying methods were significantly different at 5% level DMRT. The $50^{\circ}C$ heat drying was the most advisable condition for drying, when drying and keeping contents of effective compounds.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.344-351
• /
• 2006

This paper is intended to determine the optimal processing parameters applied to the dyeing procedure so that the desired color strength of a raw fabric can be achieved. Moreover, the processing parameters are also used for constructing a system to predict the fabric quality. The fabric selected is the nylon and Lycra blend. The dyestuff used for dyeing is acid dyestuff and the dyeing method is one-bath-two-section. The Taguchi quality method is applied for parameter design. The analysis of variance (ANOVA) is applied to arrange the optimal condition, significant factors and the percentage contributions. In the experiment, according to the target value, a confirmation experiment is conducted to evaluate the reliability. Furthermore, the genetic algorithm (GA) is combined with the back propagation neural network (BPNN) in order to establish the forecasting system for searching the best connecting weights of BPNN. It can be shown that this combination not only enhances the efficiency of the learning algorithm, but also decreases the dependency of the initial condition during the network training. Most of all, the robustness of the learning algorithm will be increased and the quality characteristic of fabric will be precisely predicted.

• 한국컴퓨터정보학회논문지
• /
• 제6권2호
• /
• pp.20-26
• /
• 2001

능동 데이터베이스의 성능 향상을 위해 능동규칙의 조건부에 관한 연구가 매우 중요한 요소가 되며, 조건부에서 발생되는 연산 처리시간을 최소화 시켜야만 시스템의 성능을 높일 수 있다. 본 논문에서는 차이트리 구조 그리고 분류트리를 생성하는 전처리 기능을 갖는 조건부 처리 기법을 제안한다. 전처리는 능동규칙을 미리 파악할 수 있는 능동 데이터베이스의 특징 때문에 도입될 수 있다. 본 논문에서는 차이릴레이션 대신에 조인연산과 선택연산을 효율적으로 처리할 수 있는 차이트리와 분류트리를 제안하여 조건부의 처리 성능을 높인다.

• 한국정보통신학회논문지
• /
• 제13권8호
• /
• pp.1601-1607
• /
• 2009

비전 시스템은 카메라를 통하여 획득한 이미지 정보를 캡쳐 후, 이를 분석하여 물체를 인식하는 것으로서, 차종 분류를 포함 한 다양한 산업현장에서 사용하고 있다. 이런 필요성으로 인하여 차종 분류를 위한 많은 연구가 이루어지고 있으나 복잡한 계산과정으로 인하여 처리 시간이 많이 소요되는 단점이 있다. 본 논문에서는 임베디드 시스템을 기반으로 하는 Vision Box를 설계하고 이를 사용한 차종인식 시스템을 제안하였다. 제안한 Vision Box의 성능을 자동차의 차종분류를 통한 사전 테스트 결과 최적 화된 환경 조건에서는 100%의 차종별 인식률을 보였으며, 조명 및 회전의 작은 변화에 따른 테스트에서 차종인식은 가능하였으나, 패턴점수가 낮아졌다. 제안한 Vision Box 시스템을 산업 현장에 적용한 결과 처리시간, 인식률 등에서 산업체의 요구 조건을 만족 할 수 있음을 확인할 수 일었다.