• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.11-22
• /
• 2017

To successfully create a low-carbon landscape in order to become a low-carbon city, it is necessary to understand the dynamics of artificial greening's resources on a multi-scale. Additionally, the effects of carbon storage should be quantitatively evaluated. The purpose of this study is to simulate and evaluate the changes in carbon storages of artificial ground trees using system dynamics throughout a long-term period. The process consisted of analyzing the dynamics of the multi-scale carbon cycle by using a casual loop diagram as well as simulating carbon storage changes in the green roof of the Gangnam-gu office building in 2008, 2018, 2028, and 2038. Results of the study are as follows. First, the causal loop diagram representing the relationship between the carbon storage of the artificial ground trees and the urban carbon cycle demonstrates that the carbon storage of the trees possess mutual cross-scale dynamics. Second, the main variables for the simulation model collected 'Biomass,' 'Carbon storage,' 'Dead organic matter,' and 'Carbon absorption,'and validated a high coefficient of determination, the value being ($R^2$=0.725, p<0.05). Third, as a result of the simulation model, we found that the variation in ranking of tree species was changing over time. This study also suggested the specific species of tree-such as Acer palmatum var. amoenum, Pinus densiflora, and Betula platyphylla-are used to improve the carbon storage in the green roof of the Gangnam-gu office building. This study can help contribute to developing quantitative and scientific criteria when designing, managing, and developing programs on low-carbon landscapes.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.179-187
• /
• 2009

This study develops a real-time signal control algorithm based on sectional travel times and includes a field test and evaluation. The objective function of the signal control algorithm is the equalization of delay of traffic movements, and the main process is calculating dissolved time of the queue and delay using the sectional travel time and detection time of individual vehicles. Then this algorithm calculates the delay variation and a targeted red time and calculates the length of the cycle and phase. A progression factor from the US HCM was applied as a method to consider the effect of coordinating the delay calculation, and this algorithm uses the average delay and detection time of probe vehicles, which were collected during the accumulated cycle for a stabile signal control. As a result of the field test and evaluation through the application of the traffic signal control algorithm on four consecutive intersections at 400m intervals, reduction of delay and an equalization effect of delay against TOD control were confirmed using the standard deviation of delay by traffic movements. This study was conducted to develop a real-time traffic signal control algorithm based on sectional travel time, using general-purpose traffic information detectors. With the current practice of disseminating ubiquitous technology, the aim of this study was a fundamental change of the traffic signal control method.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.245-253
• /
• 2009

For the growth optimization of InAs/GaSb (8/8-ML) strained-layer superlattice (SLS), the structure has been grown under various conditions and modes and characterized by the high-resolution x-ray diffraction (XRD) analysis. In this study, the strain modulation is induced by changing parameters and modes, such as the growth temperature, the ratio of V/III beam-equivalent-pressure (BEP), and the growth interruption (GI), and the strain variation is analyzed by measuring the angle separation of 0th-order satellite peak in XRD patterns. The XRD results reveal that the growth temperature and the V/III(Sb/Ga) ratio are major parameters to change the crystallineity and the strain modulation in SLS structures, respectively. We have observed that the SLS samples with compressive strain prepared in this study are show a transition to tensile strain with decreasing V/III(Sb/Ga) ratio, and the GI process is a sensitive factor giving rise to strain modulation. These results obtained in this study suggest that optimized growth temperature and V/III(Sb/Ga) ratio are $350^{\circ}C$ and 20, respectively, and the appropriate GI time is approximately 3 seconds just before InAs growth that the crystallineity is maximized and the strain relaxation is minimized.

• Journal of Welding and Joining
• /
• v.29 no.6
• /
• pp.56-64
• /
• 2011

Friction stir spot welding between 5454 aluminum alloy sheets with the different thicknesses of 1.4 and 1.0 mm was performed. In the welding process, the tool for welding was rotated ranging from 500 to 2500, and plunged to the depth of 1.8 mm under a constant tool plunge speed of 100 mm/min. And then, the rotating tool was maintained at the plunge depth during the dwell time ranging from 0 to 7 sec. The pull-out speed of the rotating tool was 100 mm/min. The increase of tool rotation speed resulted in the change of the macrostructure of friction-stir-spot-welded zone, especially the geometry of welding interface. The results of the tensile shear test showed that the total displacement and toughness of the welds were increased with the increase of the tool rotation speed, although the maximum tensile shear load was decreased. However, the change in the dwell time at the plunge depth of the tool did not produce the remarkable variation in the macrostructure and mechanical properties of the welds. In all cases, the average hardness in friction-stir-spot-welded zone was higher than that of the base metal zone. By the friction stir spot welding technique, the welds with the excellent mechanical properties than the mechanically-clinched joints could be obtained.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.2
• /
• pp.99-106
• /
• 2002

Objective : Until now, there have been no evidence-based guidelines produced for the mass screening of hyperlipidemia cases in Korea. This study was done to find the most efficient strategy for a hyperlipidemia-screening program among Korean adults, Method : Seven alternative strategies for hyperlipidemia screening were formulated and compared ir terms of cost-effectiveness. Cost and effectiveness were estimated from social perspectives and using a two-stage screening process (initial testing and additional testing for positives from the first test). A computerized database (based on persons who had visited a health promotion center in one teaching hospital for a routine health check-up) was used to determine the cost and the outcome of various strategies. Official data was used in calculating direct and indirect costs. Effectiveness was measured according to the number of persons who needed clinical intervention for hyperlipidemia. A stratified analysis, considering age group and sex, was then done. Sensitivity analyses, focusing on several uncertain parameters, were also done. Results : Of the seven test alternatives available, the most cost-effective strategy was a screening program, which consisted of an initial test of total cholesterol, high-density lipoprotein cholesterol and triglyceride. There was some variation in the rank of the cost-effectiveness ratios for the seven alternatives dependent on age group or gender. Conclusions : Current hyperlipidemia screening practice, for National Health Insurance beneficiaries, tests only the total cholesterol level with a cut-off value of 260mg/dl as an initial screening test. It is not the best strategy for cost-effectiveness, and should be modified. Different screening strategies taking age group and sex into account should be developed and used for the efficient mass screening of hyperlipidemia cases among Korean adults.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.50-53
• /
• 2017

Purpose The change in uniformity due to the decreasement in dose should be known. $^{57}Co$ sealed sources are easy to manage and use as QC sources replacing $^{99m}Tc$. Overlapping sealed sources are expected to show variations in dose due to attenuation between sealed sources. Materials and Methods A total of three experiments were conducted. The first experiment is to observe the change in the degree of senescence of the $^{57}Co$ sealed source. The second experiment is to compare the single source and overlaped source at similar doses. In the third experiment, the sources of different doses were compared on each other to determine the changes due to the attenuation between the overlapping sources. Results The results of the first experiment did not exceed the acceptable range. but each crew showed a difference. There was no statistically significant difference in the measurement of uniformity on second and third experiment Conclusion It is believed that a $^{57}Co$ sealed source can be used as a superimposed source. It is not only economical but also convenient to use. daily uniformity measurements will help reduce scan time and speed up the testing process.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.99-111
• /
• 2009

The result of Image segmentation, an indispensable process in image processing, significantly affects the analysis of an image. Despite the significance of image segmentation, it produces some problems when the variation of pixel values is large, or the boundary between background and an object is not clear. Also, these problems occur frequently when many objects in an image are placed very close by. In this paper, when the shape of objects in an image is circular, we proposed an algorithm which segment an each object in an image using the geometric characteristic of circular shape. The proposed algorithm is composed of 4 steps. First is the boundary edge extraction of whole object. Second step is to find the candidate points for further segmentation using the boundary edge in the first step. Calculating the representative circles using the candidate points is the third step. Final step is to draw the line connecting the overlapped points produced by the several erosions and dilations of the representative circles. To verify the efficiency of the proposed algorithm, the algorithm is compared with the three well-known cell segmentation algorithms. Comparison is conducted by the number of segmented region and the correctness of the inner segment line. As the result, the proposed algorithm is better than the well-known algorithms in both the number of segmented region and the correctness of the inner segment line by 16.7% and 21.8%, respectively.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.772-777
• /
• 2005

Porous hydrated lime and limestone filters were prepared by foaming and gelcasting method, and their physical properties were evaluated. Through these analyses, it has been found that with the increased porosity and pore size of the filters, majority of pores in the filters were inter-connected by windows. Also, $SO_2$ removal efficiency for the filters was investigated. As the porosity and the reaction temperature increased, $SO_2$ removal efficiency also increased. Especially, unlike the variation of entrance concentration, the entrance flow rate had great influence on the removal efficiency. In case of the filters with an equal porosity, the hydrated lime filter had superior removal efficiency compared to the limestone filter. From these results, it was shown that the high conversion ratio to CaO from the hydrated lime filter was a result of facilitated formation of $CaSO_4$ by $SO_2$.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.317-324
• /
• 2002

We investigated the compositional changes of glycoconjugates (GCs) and expression of estrogen receptor (ER)-$\alpha$, c-fos and c-jun in the vagina of normal and ovariectomized rats by histochemical and immunohistochemical methods. The mucinous transformation of the superficial layer that occurred from late diestrus to proestrus was accompanied with extensive enrichment of GCs. According to the cyclic changes of the vagina, distinct reactivity patterns such as SBA affinity in the diestrus and Con A affinity in the diestrus and estrus phase was observed. However, weak staining for GCs was detected in the atrophied vaginal epithelium of ovariectomized rats. ER-$\alpha$ immunoreaction was mainly demonstrated in the basal layer of epithelium and estrus cycle-related variation in the number of ER-$\alpha$ immunoreaction were not pronounced. But the stromal cells showing ER-$\alpha$ immunoreaction were abundantly observed from diestrus to estrus phase. The most numerous c-fos immunoreactive cells were observed in the basal and intermediate layer of epithelium and stromal fells from the proestrus to estrus phase and c-jun in the basal layer of epithelium during estrus phase. The c-jun immunoreaction of stromal cells expressed only in the estrus phase. In the ovariectomized rats, a few of ER-$\alpha$, c-fos and c-jun immunoreactive cells were observed in the vaginal epithelium and no immunoreaction were found in the stromal cells. ER-$\alpha$ and c-fos immunoreaction fully expressed in the proestrus coincident with the cell proliferation, mutinous transformation and cornification of vaginal epithelium. These data indicate that vagina epithelium and stromal reals express multiple protein such as ER-$\alpha$, c-fos and c-iun by estrogen that may function in process of cells proliferation and differentiation of vagina epithelium.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.149-154
• /
• 2015

A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.