• 품질경영학회지
• /
• 제26권2호
• /
• pp.106-117
• /
• 1998

The following study has been undertaken to build QIP (Quality Improvement Process) of an inner-layer process in a PCB (Printed Circuit Board) manufacturing plant. The objective of the study is stabilization and optimization of the process through quality improvement. To do that, defective factors in process are gathered by the cause and effect analysis and classified by PFD (Process Flow Diagram), key factors are found out by PFMECA (Process Failure Mode and Effect Criticalty Analisis), DOE(Design of Experiments) is a, pp.ied to those key factors to optimize the process, SPC (Statistical Process Control) chart is used to maintain the optimal conditions of the process and to improve quality continuously, and a quality management system is developed to improve quality mind and quality system for the PCB jmanufacturing plant. Overall, QIP is established to improve quality for the PCB manufacturing plant in the study.

• 산업경영시스템학회지
• /
• 제26권1호
• /
• pp.7-16
• /
• 2003

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and quality control are very important to supply with a product uniformly and inexpensively. Process control is given much weight in the quality control in manufacturing system. Statistical process controls(SPC) that are used in process generally have major impact on manufacturing, product design activities, and process development potentially. Control charts in statistical process control method can be interpreted the data from quality characteristics in production process and discriminated between chance variation and assignable variation in process. In addition, control chart can be used to monitor the process output and detect when changes in the inputs are required to bring the process back to an in-control state. The models that relate the influential inputs to process outputs help determine the nature and magnitude of the adjustments required. In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

• 품질경영학회지
• /
• 제37권4호
• /
• pp.43-51
• /
• 2009

This study was designed to analyze the relationship of process quality, result quality and management performance in Korean insurance industry. For this study the linkage scheme of service quality concept is used on PZB model and BSC(Balances Score Card) system. In the linkage model, the 5 service qualitry factors used in PZB model are used as the result quality variables, and internal process factor, learning/growth factor in BSC are used the process quality variables affecting the result quality variables. And also customer satisfation factor and financial performance index are used as the management performance variables. In the ivsurance industry, the process quality variables were verified to meaningfully affect the result quality variables, and the result service quality variables were verified to affect the management performance indices. As the result, the process quality and the service quality must be emhanced for the competitiveness of Korean insurance industry.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.169-185
• /
• 2003

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

• Journal of Information Technology Applications and Management
• /
• 제16권3호
• /
• pp.45-58
• /
• 2009

This paper is an empirical study especially to understand recent Chinese internet banking users' behavior and intentions through the process quality, outcome quality, customer satisfaction, reuse and word of mouth on internet banking service. The results of this study are as follows. First, percieved process quality of internet banking service affects the outcome quality, and both quality have a direct relation to customer satisfaction. It is found that Chinese internet users perceive a difference between process quality and outcome quality of internet banking service. And the reuse of the internet banking is decided by customer satisfaction as well as the word of mouth of the internet banking. For successful internet banking business in China, internet marketers should recognize that the service quality consists of the process quality and the outcome quality, and they should organize a new campaign that takes this information into consideration. And considering the process quality effect, they should pay attention to service process as well as the direct merit of services.. And if an internet banking service properly meets customer demands, internet users would constantly use internet services and would share good experiences with their neighbors. Therefore the result of our study will be of working-level help for financial company in China.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.131-138
• /
• 2024

This paper introduces Primetals Technologies' Through-Process Optimization (TPO) Services and Through-Process Quality Control (TPQC) System, which integrate domain knowledge, software, and automation expertise to assist steel producers in achieving operational excellence. TPQC collects high-resolution process and product data from the entire production route, providing visualizations and facilitating quality assurance. It also enables the application of artificial intelligence techniques to optimize processes, accelerate steel grade development, and enhance product quality. The main objective of TPO is to grow and digitize operational know-how, increase profitability, and better meet customer needs. The paper describes the contribution of these systems to achieving operational excellence, with a focus on quality assurance. Transparent and traceable production data is used for manual and automatic quality evaluation, resulting in product quality status and guiding the product disposition process. Deviation management is supported by rule-based and AI-based assistants, along with monitoring, alarming, and reporting functions ensuring early recognition of deviations. Embedded root cause proposals and their corrective and compensatory actions facilitate decision support to maintain product quality. Quality indicators and predictive quality models further enhance the efficiency of the quality assurance process. Utilizing the quality assurance software package, TPQC acts as a "one-truth" platform for product quality key players.

• 대한설비관리학회지
• /
• 제23권4호
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2680-2692
• /
• 1999

Software quality is classified by quality of process and product. In experience of Quality Management, it is known that quality level of product as it depends on goodness and badness of process and organization. As a result, improvement of software process has been important subject. According as this trends, ISO 12207 is publicated as standard of software life cycle process by ISO. For UML based object oriented development process, it is necessary that we should research detailed definition of activity and task of ISO 12207 process which is added, deleted or tailored in according to organization and project characteristics. In this thesis, by according with ISO 12207 software life cycle process, UML based object oriented development process is proposed. This process is composed of 7 steps and 19 activities including development phase, activity and product to improve quality of reliability. Usefulness of object oriented process for improvement of software quality is proved at three ways, which are comparative analysis of process characteristics, SPICE process evaluation and SPICE rick analysis.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.110-117
• /
• 2018

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. By the result of degeneration, non-conforming products and malfunction of machine occur. Therefore a periodic preventive resetting the process is necessary. This type of preventive action is called 'preventive maintenance policy.' Preventive maintenance presupposes that the preventive (resetting the process) cost is smaller than the cost of failure caused by the malfunction of machine. The process mean shift problem is a field of preventive maintenance. This field deals the interrelationship between the quality cost and the process resetting cost before machine breaks down. Quality cost is the sum of the non-conforming item cost and quality loss cost. Quality loss cost is due to the deviation between the quality characteristics from the target value. Under the process mean shift, the quality cost is increasing continuously whereas the process resetting cost is constant value. The objective function is total costs per unit wear, the decision variables are the wear limit (resetting period) and the initial process mean. Comparing the previous studies, we set the process variance as an increasing concave function and set the quality loss function as Cpm+ simultaneously. In the Cpm+, loss function has different cost coefficients according to the direction of the quality characteristics from target value. A numerical example is presented.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.547-559
• /
• 2012

This thesis introduced a model of diagnosing a company's quality management, and a process of achieving quality innovation based on the model. As for study methods, books and theses related to quality and process innovation were collected for investigation, a survey on internal employees to investigate major issues of quality and standard consciousness was conducted, and 5DP was discussed for balanced process analysis.