Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Determination of the Resetting Time to the Process Mean Shift based on the Cpm+

Cpm+ 기준에서의 공정평균이동에 대한 재조정 기간 결정

  • Lee, Do-Kyung (School of Industrial Engineering, Kumoh National Institute of Technology)
  • 이도경 (금오공과대학교 산업공학부)
  • Received : 2018.02.19
  • Accepted : 2018.03.20
  • Published : 2018.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. By the result of degeneration, non-conforming products and malfunction of machine occur. Therefore a periodic preventive resetting the process is necessary. This type of preventive action is called 'preventive maintenance policy.' Preventive maintenance presupposes that the preventive (resetting the process) cost is smaller than the cost of failure caused by the malfunction of machine. The process mean shift problem is a field of preventive maintenance. This field deals the interrelationship between the quality cost and the process resetting cost before machine breaks down. Quality cost is the sum of the non-conforming item cost and quality loss cost. Quality loss cost is due to the deviation between the quality characteristics from the target value. Under the process mean shift, the quality cost is increasing continuously whereas the process resetting cost is constant value. The objective function is total costs per unit wear, the decision variables are the wear limit (resetting period) and the initial process mean. Comparing the previous studies, we set the process variance as an increasing concave function and set the quality loss function as Cpm+ simultaneously. In the Cpm+, loss function has different cost coefficients according to the direction of the quality characteristics from target value. A numerical example is presented.

Keywords

References

  1. Ahn, G.H. and Jang J.S., Determination of Starting Value and the Resetting Time for a Production Process with Linear Shift in a Process Mean, Journal of the Korean Society for Quality Management, 1998, Vol. 26, No. 4, pp. 51-64.
  2. Arcelus, F.J., Banerjee, P.K., and Chandra, R., Optimal Production Run for a Normally Distributed Quality Characteristics Exhibiting Non-Negative Shifts in Process Mean and Variance, IIE Transactions, 1982, Vol. 14, No. 2, pp. 90-98. https://doi.org/10.1080/05695558208974587
  3. Boyles, R.A., The Taguchi Capability Index, Journal of Quality Technology, 1991, Vol. 23, No. 1, pp. 17-26. https://doi.org/10.1080/00224065.1991.11979279
  4. Chen, C.H., Determining the optimum process mean based on Asymmetric Quality Loss Function and Rectifying Inspection Plan, IEEE : Industrial Engineering Management Conference, 2004, pp. 1080-1084.
  5. Gibra, I.N., Optimal Control Processes Subject to Linear Trends, The Journal of Industrial Engineering, 1967, Vol. 18, No. 1, pp. 35-41.
  6. Golhar, D.Y., Determination of the Best Mean Contents for a Canning problem, Journal of Quality Technology, 1987, Vol. 19, pp. 82-84. https://doi.org/10.1080/00224065.1987.11979042
  7. Juran, J.M., Quality Handbook, McGraw-Hill Companies, Inc., 1962.
  8. Kamat, S.J., A Smoothed Bayes Control of a Variable Quality Characteristic with Linear Shift, Journal of Quality Technology, 1976, Vol. 8, No. 2, pp. 98-104. https://doi.org/10.1080/00224065.1976.11980724
  9. Lee, D.K., Determination of The Retting time to the Process Mean Shift by the Loss Function, Journal of Society of Korea Industrial and Systems Engineering, 2017, Vol. 40, No. 1, pp. 165-172. https://doi.org/10.11627/jkise.2017.40.1.165
  10. Lee, J.H., Park T.H., Kwon H.M., Hong S.H., and Lee M.K., Optimum target values for manufacturing processes when drifting rate in the process mean is normally distributed, Journal of the Korean Society for Quality Management, 2010, Vol. 38, No. 4, pp. 98-104.
  11. Lee, M.K. and Bai D.S., Determination of the Optimal Target Values for a Canning Process with Linear Shift in the Mean, Journal of the Korean Institute of Industrial Engineers, 1994, Vol. 20, No. 1, pp. 3-13.
  12. Makis, V., Optimal tool replacement with asymmetric quadratic loss, IIIE Transaction, 1996, Vol. 28, No. 6, pp. 463-466. https://doi.org/10.1080/07408179608966292
  13. Manuele, J., Control Chart for Determining Tool Wear, Industrial Quality Control, 1945, Vol. 1, No. 6, pp. 7-10.
  14. Pandit, S.M. and Wu, S.M., Time Series and System Analysis with Applications, John Wiely & Sons, 1983, pp. 307, 490-491.
  15. Park, D.K., Lee, J.S. and Jo, G.H., A Study on the Wearing Analysis of Insert Tip and Chip's Shape in Turning Operations, Journal of the Korea Academia- Industrial cooperation Society, 2015, Vol. 16, No. 4, pp. 2430-2435. https://doi.org/10.5762/KAIS.2015.16.4.2430
  16. Quesenberry, C.P., A SPG Approach to Compensating a Tool-Wear Process, Journal of Quality Technology, 1988, Vol. 20, No. 4, pp. 220-229. https://doi.org/10.1080/00224065.1988.11979114
  17. Rahim, M.A. and Tuffaha F., Integrated Model for Determining the Optimal Initial Settings of the Process Mean and the Optimal Production Run Assuming Quadratic Loss Functions, International Journal of Production Research, 2004, Vol. 42, No. 16, pp. 3281-3300. https://doi.org/10.1080/00207540410001666233
  18. Schneider, H., Colm O'Cinneide, and Tang, K., Optimal Production Process Subject to AOQL Constraint, Naval Research Logistics Quarterly, 1988, Vol. 35, No. 3, pp. 383-396. https://doi.org/10.1002/1520-6750(198806)35:3<383::AID-NAV3220350307>3.0.CO;2-8
  19. Springer, C.H., A Method for Determining the Most Economic Position of a Process Mean, Industrial Quality Control, 1951, Vol. 8, pp. 36-39.
  20. Sule, D.R. and Harmon, B., Determination of Coordinated Maintenance Scheduling Frequencies for a Group of Machines, AIIE Transactions, 1979, Vol. 11, No. 1, pp. 540-548.

Cited by

  1. 고장을 고려한 공정평균 이동에 대한 조정시기 결정 vol.42, pp.4, 2018, https://doi.org/10.11627/jkise.2019.42.4.145
  2. 생산량이 감소하는 공정평균이동 문제에서 Cpm+ 기준의 손실함수를 적용한 보전모형 vol.44, pp.1, 2021, https://doi.org/10.11627/jkise.2021.44.1.045