• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1815-1820
• /
• 2008

Self-catalytic behavior of combustion-synthesized carbon nanotubes (CNTs) is evaluated using a double-faced wall stagnation flow burner with a CNT-deposited stainless steel plate wall. CNT formation is observed using field-emission scanning and transmission electron microscopies and Raman spectroscopy. A self-catalytic behavior of multi-walled CNTs (MWCNTs) shows the enhanced ratio of channel diameter to tube wall thickness and the enhanced intensity ratio of G-band to D-band in Raman spectroscopy, implying that the quality of metal-catalytic, flame-synthesized MWCNTs can be much improved via a CNT self-catalytic flame-synthesis process. Thus, using a DWSF burner through the self-catalytic process has potential in mass production of CNTs having much improved quality.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.319-323
• /
• 2012

In order to predict the internal void closing behavior in open die forging process, multiple scale modeling has been developed and applied. The huge size difference between ingot and inner void makes it almost impossible to simultaneously model the actual loading conditions and the void shape. Multiple scale modeling is designed to integrate macro- and micro- models effectively and efficiently. The void closing behavior was simulated at 39 different locations in a large ingot during upsetting and cogging. The correlation between the closing behavior and variables such as effective plastic strain and maximum compressive strain was studied in order to find an efficient measure for predicting the soundness of the forging.

• Tribology and Lubricants
• /
• v.26 no.3
• /
• pp.157-161
• /
• 2010

This study investigated the effects of spray parameters on wear behavior of the Ni-based hard coatings fabricated by thermal spray process. The experiment was designed by an orthogonal array, the Ni-based hard coatings were fabricated according to this experimental design. The wear test was performed on these coatings using ball-on-disk wear tester. The ANOVA was used to analyze the effects of spray parameters on the wear rate of these coatings, as a result, oxygen gas flow and acetylene gas flow were determined as main factors effected on the wear rate. The effects of these two factors on wear behavior were observed by using SEM and EDX.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.66-72
• /
• 2009

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.10 no.2
• /
• pp.138-144
• /
• 2003

Purpose: The purpose of this study was to identify the change processes for exercise behaviors in each stage. Method: Participants for this study were randomly selected from adults between the ages of 20-44. Data were collected using questionnaires over a 2 week period at the end of May, 2003. The instrument, Stages of exercise behavior change developed by Marcus et al. (1992b), and the instrument, Changing phases of exercise behaviors developed by Nigg et al. (1999) and translated by Kwon (2002) were used to investigate the behaviors. Result: 1. Related to stage of exercise behavior change of participants, it was found that 55.2% of participants exercised regularly. 2. Among the change processes according to stage of change showed that dramatic relief was the most frequently used process for all stages. Environmental reevaluation and social liberation were used most in the contemplation stage, while environmental reevaluation and stimulus control were used most in the preparation stage. In addition, scores for stimulus control and environmental reevaluation were high in the action stage. In the maintenance stage, social liberation and counter-conditioning were used most frequently. 3. The process of exercise behavior change which differentiates the stages of exercise behavior change were shown to be counter-conditioning, which was an influential factor that differentiates the contemplation stage and maintenance stage. Conclusion: The results suggest that change process management should be the focus to enhance the stage of change for exercise in this group.

• Tribology and Lubricants
• /
• v.29 no.5
• /
• pp.298-303
• /
• 2013

In this work, the effect of applied load on the wear behavior of Al/SiC composites was studied. Al/SiC composites were fabricated following the thermal spray process. Dry sliding wear tests were performed on these composites under four different applied loads, i.e., 5, 10, 15, and 20 N. The wear behaviors of the composites under these applied loads were investigated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Under applied loads of up to 15 N, the wear rates of Al/SiC composites decreased with an increase in the applied load because of the formation of an adhesion layer on the worn surface. However in the case of an applied load of 20 N, the wear rate was significantly high because the formation and fracture of the adhesion layer were repeated continuously. These results show that the wear behaviors of the tested composites are significantly influenced owing to the applied loads.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1093-1101
• /
• 2002

Continuous fiber ceramic composites (CFCCs) have advantages over monolithic ceramics : Silicon Nitride composites are not well used for application because of their low fracture toughness and fracture strength, but CFCCs exhibit increased toughness for damage tolerance, and relatively high stiffness in spite of low specific weight. Thus it is important to characterize the fracture resistance and properties of new CFCCs materials. Tensile and flexural tests were carried out for mechanical properties and the fracture resistance behavior of a SCS6 fiber reinforced Si$_3$N$_4$ matrix CFCC was evaluated. The results indicated that CFCC composite exhibit a rising R curve behavior in flexural test. The fracture toughness was about 4.8 MPa$.$m$\^$1/2 , which resulted in a higher value of the fracture toughness because of fiber bridging. Mechanical properties as like the elastic modulus, proportional limit and the ultimate strength in a flexural test are greater than those in a tensile test. Also a numerical modeling of failure process was accomplished for a flexural test. This numerical results provided a good simulation of the cumulative fracture process of the fiber and matrix in CFCCs.

• Preventive Nutrition and Food Science
• /
• v.14 no.3
• /
• pp.246-251
• /
• 2009

The partitioning behavior of five printing ink solvents was studied in cookie ingredients and cookies to examine migration behavior, and to determine if one could predict Kp of a cookie from summing the Kp of each ingredient multiplied by its weight factor in the cookie formula. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone, and toluene. Gas chromatography was used to measure Kp values on each raw and baked ($260^{\circ}C$ for 10 min) cookie ingredients, and lab-made cookies. The baking process-decreases in water content in each sample generally affected Kp of polar solvents, but did not affect that of the non-polar solvents. Structural changes in cookie ingredients during the baking process also caused some change of migration behavior. While the prediction of Kp of lab-made cookies using the Kp of raw ingredients showed significant differences between calculated and experimentally found values, predictions with baked ingredients showed much smaller differences. This suggests that loss of water and changes of crystallinity in cookies and cookie ingredients due to the baking process are important and affect the Kp.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.2
• /
• pp.55-73
• /
• 2014

The purpose of this study is to examine the level of conspicuous consumption and resource-saving behavior in primary school students, and to discover the factors that influence these behaviors most strongly. The research was conducted in 2011 using a written questionnaires that were completed by 500 primary school students residing in Seoul, South Korea. The data was analyzed using statistical methods, including frequency, percentiles, means, standard deviation, Cronbach's coefficient, ANOVA, and hierarchical multiple linear regression analysis, using SPSS 18.0. As a result of these analyses, the average level of conspicuous consumption was found to be 2.65 relatively rational score. Next, it was shown that the conspicuous consumption of respondents differed significantly based on variables, such as allowances, family income, socialization process in childhood, family cohesion, and parental child rearing method. Finally, the greatest influences on respondent's resource-saving behavior was seen to be the child's socialization process in childhood, family cohesion, parental child rearing method, and conspicuous consumption. These variables must therefore all be considered when teaching primary school students and encouraging them to assume rational resource-saving habits in their daily lives.

• Informatization Policy
• /
• v.26 no.2
• /
• pp.62-80
• /
• 2019

The purpose of this study is to investigate the direct effect of victimization experience on cyber security behavior and the indirect effect of information protection awareness through the Dual Process Theory. Baron & Kenny regression analysis was conducted and the results are as follows - first, victimization experience has a positive effect on cyber security behavior; second, the relationship between victimization experience and cyber security behavior is mediated by cyber security awareness; and third, the direct effect of victimization experience on cyber security behavior and the indirect mediating effect of cyber security awareness are both positive (+). The direct effect of victimization experience on cyber security behavior is analyzed to be relatively large compared to the indirect effect that cyber security awareness has on cyber security behavior. Based on these results, It is suggested that periodic cyber security education and campaign policies are needed to enhance cyber security behavior.