• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.230-236
• /
• 2009

국내 하수슬러지는 2012년부터 런던협약에 의해 해양투기가 금지될 예정에 있어 이에 대한 처리방법이 절실한 실정이다. 본 연구에서는 하수슬러지 케익을 재활용하기 위한 방법으로 탄화공정을 이용하여 탄화물 제조 및 에너지 특성에 대한 검토를 실시하였다. 하수슬러지 케익의 기초적 특성과 조성에 의하면, 하수슬러지 케익에는 27%의 인산염이 포함되어 있으며 이는 환원제로서 유해물질 처리에 이용될 수 있다. 하수슬러지 케익의 발열량을 파악한 결과, 저위발열량은 38.7 kcal/kg으로 하수슬러지 케익을 탄화하지 않고 직접 에너지원으로 사용하는 것은 바람직하지 않다. 하수슬러지 케익의 탄화공정에서 최적 탄화온도와 최적 탄화시간은 $250^{\circ}C$와 15분으로 설정되었다. 이 조건에서의 탄화물의 발열량은 비교적 낮아 하수슬러지 케익 탄화물 자체는 신재생 에너지원으로의 가능성은 크지 않다고 판단되나 인산염이 27% 정도가 포함되어 있어 다른 유기성 폐기물과 혼합하여 탄화하는 것이 적합하다고 판단되었다.

• 간호행정학회지
• /
• 제9권1호
• /
• pp.19-30
• /
• 2003

Purpose : The concept of organizational socialization has been regarded as an abstract concept of organizational learning process and it has been used as strategy for the organizational goal attainment. New graduated nurses' organizational socialization has been a very important process for learning knowledge, skills and behaviors in hospital setting. This study was to analyze and clarify the meaning of the concept of Organizational Socialization. Method : This study use the process of Walker & Avant's concept analysis. Results : The critical attributes of organizational socialization were identified as : 1) Internalization of Value and belief of organization; 2) Learning of organizational rules and modes of living; 3) Improvement of job performance; 4) Maintenance of supportive relationship; 5) Formation of occupational identity. The antecedents of organizational socialization consist of those facts that 1) negative feeling of role; 2) difficulties of interpersonal relationship; 3) unskilled work performance. And the consequences of organizational socialization consist of those facts that 1) organizational commitment; 2) job satisfaction; 3) intention of leave work setting; 4) improvement of job performance; 5) improvement of decision making; 6) maintenance of supportive relationship. Conclusion : Through this concept analysis, the concept of organizational socialization is defined as internalization of value and belief of organization, learning of organizational rules and modes of living, improvement of job performance, maintenance of supportive relationship and formation of occupational identity.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.82-88
• /
• 2002

Copper bus-bar is made by drawing process and used in many part of industry. Ohen design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper it is analyzed to determine shrink fit value by shrink fit analysis program which is used with APDL/UIDL language in a commercial FEM package, ANSYS. The shrink fit analysis has been developed that enables optimal desist of the dies taking into account the elastic deflections. Elastic deflection is generated in shrink fitting the die inserts and that caused by the stresses generated using DEFORM software for drawing process analysis. This data can be processed as load input data fir a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.78-84
• /
• 2002

건설 VE실무에서 기능분석은 VE이론과 달리 업무 자체가 누락되거나 요식적으로 적용되어 왔다. 이는 건설 VE활동의 시간적 제약, VE팀원의 훈련, 경험, 인식 부족 등과 함께 제조업 VE와 근본적으로 다른 건설 VE의 특성에 기인한 것으로 그동안의 국내 건선 VE 성과와 기능분석은 상호 연계되지 못하여 왔다. VE의 핵심인 기능분석이 제외된 건설 VE는 이론상으로 VE가 될 수 없는 모순점을 가지기 때문에 건설 VE실무와 이론의 차이를 좁히기 위해서는 우선 기능분석에서부터 그 해결책이 모색되어야 할 것이며, 이를 동해 건설 VE에 대한 인식의 전환 및 발전방향이 시도되어야 할 것이다. 이에 본 연구는 국내 건설 VE에서 활용되고 있는 기능분석의 방법과 절차, 그리고 적용시기의 문제점을 지적하고 건설 VE활동에서 기능분석의 활용과 효과를 극대화할 수 있는 기능분석 적용방안과 이때 유용하게 활용될 수 있는 전산 FAST 다이어그램 작성 모델(Easy-FAST)을 제안하였다.

• 한국치위생학회지
• /
• 제6권1호
• /
• pp.25-35
• /
• 2006

The purpose of this study is to forecast patient satisfaction and service value through the staged regression analysis of the relation between each factor and its satisfaction and service value, following the measurement of the quality of dental care service that patients recognize. And a self-administered survey was used for this study. The subjects of this survey were 394 outpatients of dental clinics located in K city in the period from Dec. 5, 2004 to Feb. 19, 2005, the questionnaire was composed of a total of 31 questions to measure the quality of overall dental care service(22 questions), the patient satisfaction(6 questions) and the service value(3 questions). The 7 points Likert scale ranging from "very poor"(1-point) to "very high"(7-point) was used for these questions The results of study could be summarized as follows: 1. The most useful index to predict patient satisfaction turned out to be "internal environment", followed by "treatment process and waiting time", "dentist", "external environment", and "dental hygienist". 2. The service value had a significant effect on the "internal environment", "dentist", "treatment process and waiting time". 3. The most useful index to predict the service value turned out to be "treatment process and waiting time", followed by "internal environment" and "dentist". Today, the quality of dental care service is becoming a prime concern since it is directly connected to a matter of survival of medical service organizations. Dental clinics desperately need patient-oriented marketing strategies in order to actively cope with changing medical environment. They also need to thoroughly examine possible measures to maximize the service value by establishing a variety of service strategies which can promote service quality that patients recognize.

• 유통과학연구
• /
• 제17권4호
• /
• pp.69-76
• /
• 2019

Purpose - The purpose of this study is to examine the effect of basic value satisfaction on service quality evaluation and customer loyalty and the moderating effect of Bargain-proneness in this process. Specifically, I analyzed the influence of basic value satisfaction, the mediating effect of service quality evaluation, and the moderated mediation effect of Bargain-proneness. Research design, data, and methodology - Data collection for this study was conducted for adults over 18 years of age with shopping experiences in traditional market within a month around the traditional market in the metropolitan area. A total of 250 questionnaire response data was obtained. Hypotheses were tested using SPSS. The PROCESS macro method was used to verify the mediating effect of the service quality evaluation on the relationship between basic value satisfaction and customer loyalty. Hierarchical regression analysis was performed to analyze the moderated mediation effect of the bargain-proneness tendency. Results - Empirical results showed that the basic value satisfaction affected service quality evaluation and customer loyalty. Specifically, it has been found that it directly affects customer loyalty and indirectly influences through service quality evaluation. The moderated mediation effect of the bargain-proneness tendency in the process of basic value satisfaction affecting customer loyalty through service quality evaluation has been verified. In other words, the higher the bargain-proneness tendency, the more influence the basic value satisfaction has on the favorable service quality evaluation. Conclusions - This study contributed to the distribution literature in that it attempted a new empirical study considering the variable 'bargain-proneness tendency', which had not received much academic attention in the past. Furthermore, this study contributed academically in that it presented important moderating variables that should be paid attention in the field of distribution studies. In this study, bargain-proneness was used with a focus on traditional markets, but this variable could play an significant role in future offline distribution studies that should pay attention to meet hedonic needs of shopping. These results suggested that traditional market practitioners should focus on the basic value and that the bargain-prone consumer segment should be considered as a target.

• 한국인터넷방송통신학회논문지
• /
• 제23권3호
• /
• pp.185-191
• /
• 2023

변동성 가치에 대한 미래 예측을 분석하는 연구는 여러 분야에서 이루어지고 있다. 하지만 이러한 미래 가치분석은 각 분야의 연구결과를 통해 각 분야에 따른 변수가 너무 많아 예측결과의 정확도가 낮으며 결과에 영향을 미치는 객관적인 핵심영향요소를 찾아내는 데 어려움이 있음을 알 수 있었다. 특히 다양한 영향인자의 중요도에 대한 객관적인 기준이 마련되지 않아 연구자의 주관에 의지하여 핵심영향인자를 판단하여 적용하는 실정이다. 이에 여러 분야에서 객관적으로 적용할 수 있는 변동성 재화가치 예측에 영향을 미치는 핵심영향인자 추출을 위한 합리적인 Process 모델이 필요하게 되었다. 본 연구에서 총 7단계로 핵심영향인자 추출을 위한 Process 모델링을 제시 하였으며, 각 단계별로 핵심영향인자 추출을 위한 방법을 구체적으로 정의하였다. 또한, 제안된 모델링을 이용하여 원자재 분야의 주요 변동재화 중 Ni금속을 적용하여 Simulation을 한 결과 기존 방식에 의한 예측 값 0.872%, 본 연구 모델링을 적용한 예측 값 0.864%로 예측 결과 값이 모델에서 제시한 기준에 부합함을 확인 하였다.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.42-45
• /
• 2012

In construction industry, the term 'procurement' is considered as a project based job where clients and contractors are always keen to observe performance indicators. These indicators represent financial and non-financial efficiency of project activities. Among these, the monitoring of financial indicators such as cost monitoring is an ongoing process and its importance cannot be undermined during the project life cycle. It can be monitored by using traditional approach of direct reporting of actual cost against budget. However, the comparison of budget versus actual spending does not indicate the worth of the work which is completed at any given time. This approach does not represent the true cost performance of the project. Because of these limitations, this paper discusses the applications of Earned Value Analysis (EVA) for cost monitoring of construction projects in Malaysia. Besides traditional approach, EVA is a three-dimensional approach that compares three cost indicators i.e. the budgeted value of work scheduled with the earned value of physical work completed and the actual cost of work completed. Therefore, cost monitoring by EVA is an objective measure of actual work performed. This paper uses a case study, an example application of EVA as a cost monitoring tool. This case study reaffirms the benefits of using EVA for project cash flow analysis and forecasting.

• Journal of Information Technology Applications and Management
• /
• 제9권3호
• /
• pp.79-95
• /
• 2002

As the budget size and complexity of 1T investment are growing, IT value measurement becomes more critical to the success of IT management In public organizations and private firms. It has been known that there are many factors such as IT costs, risks, qualify, and usage that should be taken Into consideration during the process of measuring IT value and making IT Investment decisions. However, little research has been done so far In order to analysis factors affecting the IT value and effectiveness. The purpose of this study Is to Investigate the impact of IT Project types and ownerships on IT value evaluation. The three research questions are as follows : (1) Does IT project type such as transactional, Informational, and infrastructure have any impact on 1T value measurement\ulcorner (2) Does the IT development ownership has any Impact on IT value\ulcorner (3) Does the IT operation ownership has any impact\ulcorner The empirical research was done at S-Electronics, world-wide known and the biggest manufacturing company in Korea, based on the method of structured interview. About 200 individual Information systems have been evaluated to calculate ROI measures, the dependent variable In this study. The results of statistical analysis show that two of three Independent variables, IT project types and IT development ownership, have statistically significant effects on IT value in terms of ROI measures.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.527-536
• /
• 2020

In this study, a process is proposed to calculate analytical correction values for the vertical shortening of all columns on all floors in a high-rise building that minimizes the error between the structural analysis predictions and values measured during construction. The weight ratio and the most probable value were accordingly considered based on the properties of the shortening value analyzed at several points in each construction stage and the distance between these measured points and unmeasured points at which the shortening was predicted. The effective range and shortening value normalization were considered using the column grouping concept. These tools were applied to calculate the error ratio between the predicted and measured values on a floor where a measured point exists, and then determine the estimated error ratio and estimated error value for the unmeasured point using this error ratio. At points on a floor where no measured point exists, the estimated error ratio and the estimated error value were calculated by applying the most probable value considering the weight ratio for the nearest floor where measured points exist. In this manner, the error values and estimated error values can be determined at all points in a structure. Then, the analytical correction value, defined as this error or estimated error value, was applied by adding it to the predicted value. Finally, the adequacy of the proposed correction method was verified against measurements by applying the analytical corrections to all unmeasured points based on the points where the measurement exists.