• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.578-583
• /
• 2014

Optical pick-up is a core component for data read/write operations in optical disc drives, and an optical pick-up performance evaluator is an instrument used to analyze the overall performance of an optical pick-up. Due to inevitable errors in an analog measurement circuit, resultant evaluation data is not guaranteed to be accurate. In this paper, a calibration method for an optical pick-up performance evaluator is proposed to ensure evaluation accuracy. Measured data is corrected by a 1st order correction function, and a calibration process based on least-square method is utilized to obtain correction coefficients of the correction function. The proposed calibration method is applied to experiments, and enhanced accuracy is presented with resultant evaluation data.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.373-377
• /
• 2001

This study is to examine the factors that influence the performances of service quality in university hospitals by investigating systematically the condition of service quality. A synthesis of the health care quality is conducted to identify physical quality, operating process quality, and human resources quality that relate to both the overall satisfaction and intention of revisit. Based on the proposed hypotheses, the relationships between the service quality factors and performance are examined using data collected from 167 patients in three hospitals, Korea. Reliability and validity tests are performed for examining its relationship with service quality in health care systems. Total eight independent variables with respect to three service quality levels and two dependent variables for performance are identified for relationships between service quality and performance in health care systems. The results provide health care managers with a managerial insight to the planning function of performance with service quality in health care systems as well as other operations (business, government, or other service organizations) systems. Implication of the study for theory, future studies, and practices are discussed.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.201-215
• /
• 2003

At present, European railways in U.K., Sweden, and Belgium have taken serious efforts to improve railway services by implementing a service evaluation system. Not only do they measure the service-related performance of a railway system, but also operate an incentive system according to the results of service-related performance. This performance evaluation system can be also used to provide basic data for other policies such as fares, subsidies and track user charges etc. After the restructuring process of Korean national railways, therefore, although it is expected to face many difficulties in the future, it is desirable to implement a performance evaluation system for securing the long-term growth of Korean railway industry.

• Composites Research
• /
• v.37 no.3
• /
• pp.219-225
• /
• 2024

It is essential to develop a light-weight, high-performance structure for the deployable reflector antenna, which is the payload of a reconnaissance satellite, considering launch and orbital operation performance. Among them, the composite main reflector is a key component that constitutes a deployable reflector antenna. In particular, the development of a high-performance main reflector is required to acquire high-quality satellite images after agile attitude control maneuvers during satellite missions. To develop main reflector, the initial design of the main reflector was confirmed considering the structural performance according to the laminate stacking design and material properties of the composite main reflector that constitutes the deployable reflector antenna. Based on the initial design, four types of composite main reflectors were manufactured with the variable for manufacturing process. As variables for manufacturing process, the curing process of the composite structure, the application of adhesive film between the carbon fiber composite sheet and the honeycomb core, and the venting path inside the sandwich composite were selected. After manufacture main reflector, weight measurement, non-destructive testing(NDT), surface error measurement, and modal test were performed on the four types of main reflectors produced. By selecting a manufacturing process that does not apply adhesive film and includes venting path, for a composite main reflector with light weight and structural performance, we developed and verified a main reflector that can be applied to the SAR(Synthetic Aperture Rader) satellite.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.445-453
• /
• 2012

The aim of this paper was to prove that if the risk level in combined tasks was improved through evaluation of postural load of liquid weight measurement process, the workload level and ratio of exposure time would be changed, and the time of process would be seen concurrently. Background: According to results of epidemiological studies conducted by Korea Occupational Safety & Health Agency, 122 musculoskeletal disorders occurred during 1992 to 2008, in which manufacturing industry covers 96(78.7%) of total. However, this is an insufficient level and only occupies 39% based on the South Korea's manufacturing standard industrial classification(246 industries). Method: Firstly, the number of batches weighed on one day(460min) was investigated based on the work performed and Weight measured weekly. VCR recording was taken based on the level of liquid ingredients prescribed for 1batch using the Camcorder. After dividing a 356 sec video into 1 sec using the screen capture function in Gom player, the job classification was performed by analyzing the change of working postures, which revealed 148 working postures. Time measurement was decided by time of the postures was being maintained. Then, the REBA analysis was performed for the working postures. The ratio of Exposure time was calculated based on the measurement time and REBA Score. In addition, the recommendations were designed and implementation was carried out for the working postures with REBA Score higher than 3. Finally, after the intervention, REBA measurement, time measurement, and ratio of exposure time were calculated for the comparison of works before and after improvement. Results: The number of work elements was decreased by 30.4% from 148 to 103 after improvement. The results of time measurement showed that the time was reduced by 46.3% from 356 sec to 191 sec. And the ratio of exposure time was also improved by 52.1% from 0% to 52.1% after improvement. Conclusion: The reduction of time was found to improve the productivity of management. Furthermore, because the reduction of ratio of exposure time and the improvement of workload level are the improvement of discomfort, it would contribute to the improvement of the worker's psychological working posture. Application: These results would contribute to musculoskeletal disease prevention and management performance. Further studies for other industries would be needed based on this case study.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.96-102
• /
• 2014

Urine bioassay has been widely used for internal dosimetry due to simple process of sampling and measurement. In this paper, we participated in the NRIP (NIST Radiochemistry Intercomparison Program) hosted by US NIST to carry out a reliable performance test of urine bioassay and introduced the measurement method and results of NRIP-2013. In customary exercise with 60 days of reporting time, bioassay results of 12 radionuclides in the synthetic urine samples were acceptable based on the performance criteria of ANSI N13.30. In emergency preparedness exercise with 8 hours of reporting time, bioassay results of 9 radionuclides showed that differences ranged from -35% to 45%. However, we concluded that urine bioassay applied for emergency preparedness exercise would be applicable for rapid screening and estimation of internal exposure within a difference of ${\pm}45%$ in the event of radiological accidents.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.59-69
• /
• 2016

We proposed a specialized model of performance measurement to measure the training performance of the trainees in cyber practical training. Cyber security professionals are cultivating their expertise, skills, and competencies through cyber practical training in specialized education and training institutions. The our proposed process of trainee evaluation is consisted of an evaluation component discovery, evaluation item selection, evaluation index catalog, ratings and criteria decision, and calculation formula. The trainee evaluation is consisted of a formative evaluation during the training and an overall evaluation after finished training. Formative evaluation includes progress evaluation and participation evaluation, and overall evaluation includes practice evaluation and learning evaluation. The evaluation is weighted according to the importance of evaluation type. Because it is evaluated actual skills and abilities, competencies are assigned a high weight, while knowledge and attitudes are assigned a low weight. If cyber security trainees are evaluated by the proposed evaluation model, cyber security professionals can be cultivated by each skill and knowledge level and can be deployed by importance of security task.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.261-268
• /
• 2022

This study is about the effect of the intention of residents to participate in the regional capacity building project on the project performance. For the method, 238 samples were collected from villagers in Jeollanam-do, and the hypothesis was verified through SPSS22.0 and PROCESS macro 3.5 Model 4. The results showed, first, that there was a difference in performance according to the level of awareness of participation intention. Second, participation intention showed a positive (+) effect on performance. Third, the mediating effect of the regional capacity building project was confirmed. The limitation of the study was that it was limited to the Jeonnam region. Quantitative measurement was not performed in parallel with the performance. In the future, an activation plan through actual citizen participation and performance verification should be prepared.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.25-39
• /
• 2020

In this study, an edge device that monitors the injection molding process by measuring the mold vibration(acceleration) signal and the mold surface temperature was developed and evaluated its performance. During injection molding, signals of the injection start, V/P switchover, and packing end sections were obtained through the measurement of the mold vibration and the injection time and packing time were calculated by using the difference between the times of the sections. Then, the mold closed and mold open signals were obtained using a magnetic hall sensor, and cycle time was calculated by using the time difference between the mold closed time each process. As a result of evaluating the performance by comparing the process data monitored by the edge device with the shot data recorded on the injection molding machine, the cycle time, injection time, and packing time showed very small error of 0.70±0.38%, 1.40±1.17%, and 0.69±0.82%, respectively, and the values close to the actual were monitored and the accuracy and reliability of the edge device were confirmed. In addition, it was confirmed that the mold surface temperature measured by the edge device was similar to the actual mold surface temperature.