• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2533-2540
• /
• 2009

Performance of processing protocols is one most important goal in a network or systems constituting the network. Measurement of performance, thus, is an essential element to not only establish the network but also develop systems. A projection in vector mathematics is the transformation of points and lines in one plane onto another plane by connecting corresponding points on the two planes with parallel lines. This is a method, as an application of vector mathematics, which is widely used in engineering as well to consider elements dedicated to the measurement object. This paper proposes a sound methodology for measuring the performance of the SIP protocol, which is based on the projection. The SIP protocol is a typical standard protocol for call-processing in the internet telephony of Next Generation Convergence Network. Owing to use the projected protocol which excludes unnecessary operation paths, the methodology can be effective in implementation and resource utilization. This paper also presents a process based on the proposed methodology to measure the performance of a SIP proxy server.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.107-116
• /
• 2008

Nowadays, BSC presented by alpan is observed by many enterprises and is being operated gradually. BSC includes non-financial factor as well as financial factor in performance assessment and it is a tool that will be able to evaluate even strategy of long-term view. In point of performance management, BSC brings in relief importance on non-financial performance as well as financial performance and it shares with viewpoint of 4 things of financial viewpoint, customer viewpoint, internal process view point, learning and growth viewpoint. then these make an array with vision and strategy of organization by causal relationship, it presented necessity of performance control on organization as center on KPI of inner of each viewpoint. Thus, study on measures and control of management performance is progressed actively and is accomplishing much development. This study is aimed at calculation of weight that is able to reflect its importance about AHP on KPI of each viewpoint. The purpose of this study is to present desirable performance measurement model and to give a weight in consideration of working-level character.

• Journal of Digital Convergence
• /
• v.7 no.2
• /
• pp.51-62
• /
• 2009

Most studies of organizational effectiveness previously done, have measured financial performance such as productivity, efficiency or subjective performance such as a commitment, satisfaction, and turnover intention of employees. However, these measurements have limitations to evaluate a organizational effectiveness in recent knowledge information era because evaluation of organizational effectiveness in knowledge-based society needs measurements in various aspects such as financial, customer, internal business process, and learning and growth. The purpose of this study is to overcome these problems and to introduce an appropriate system for evaluation of organizational effectiveness under knowledge management paradigm. In this paper, we suggest a Balanced Scorecard(BSC) as a new measurement standard of organizational effectiveness in a knowledge information era. The balanced scorecard is designed to help firms that have historically overemphasized short-term financial performance. When measuring organizational effectiveness through Balanced Scorecard(BSC) suggested by Kaplan and Norton[31], it is to present the measurement indices that can cover the limitation of the past evaluation indices of organizational effectiveness.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.291-291
• /
• 2002

DGPS(Differential Global Positioning System) and RTK(RealTime Kinematic) is in one of today's most widely used surveying techniques. But It's use is restricted by the distance between reference station and rover station and it is difficult to process data in realtime by it's own orgnizational limitation in precise measurement of positioning. To meet these new demands, In This paper, new DGPS and RTK correction data services through Internet and PSTN(Public Switched Telephony Network) have been proposed. For this purpose, we implemented performance a DGPS and RTK error correction data transmission system for long-distance using the internet and PSTN network which allows a mobile user to increase the distance at which the rover receiver is located from the reference in realtime. and we analyzed and compared DGPS and RTK performance by experiments through the Internet and PSTN network with the distance and the time.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.8
• /
• pp.1-7
• /
• 2017

In this paper, we proposed the test equipment that can perform separate performance tests to mass-produce the Automatic Test Equipment. Until now, the performance test of the ATE has been performed after it has been assembled perfectly. It is possible to perform the performance test only when the external device manufacturing and setting of measurement resources and the internal wiring work have been completed. So we have been studying test equipment that separately tested the switching devices that played a key role in the performance of the ATE. To build the test equipment, we reviewed the circuit card assemblies that make up the switching devices. We designed a test equipment that satisfies the performance test and apply the completed test equipment to the actual production process to analyze whether it was effective in improving the time and workability of the performance test. The test equipment has the advantage that it can be used universally in the mass production process of ATE with the same type of switching device.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• The Magazine of the IEIE
• /
• v.37 no.8
• /
• pp.50-59
• /
• 2010

$0.18-{\mu}m$ high voltage technology 13.5V high voltage well-based symmetric EDMOS isolated by MTI was designed and fabricated. Using calibrated process and device model parameters, the characteristics of the symmetric and asymmetric EDMOS have been simulated. The asymmetric EDMOS has higher performance, better $R_{sp}$ / BVDSS figure-of-merit, short-channel immunity and smaller pitch size than the symmetric EDMOS. The asymmetric EDMOST is a good candidate for low-power and smaller source driver chips. The low voltage logic well-based EDMOS process has advantages over high voltage well-based EDMOS in process cost by eliminating the process steps of high-voltage well/drift implant, high-temperature long-time thermal steps, etc. The specific on-resistance of our well-designed logic well-based EDMOSTs is compatible with the smallest one published. TCAD simulation and measurement results show that the improved logic well-based nEDMOS has better electrical characteristics than those of the conventional one. The improved EDMOS proposed in this paper is an excellent candidate to be integrated with low voltage logic devices for high-performance low-power low-cost chips.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.504-509
• /
• 1994

Recently SMT is used widely to place the SMD on bare board which is very small and highly integrated. And that is one of the issue directly in the electric products assembly process and especiallly in the field of optimizing electric product's performance, automatically tuning method which is highly demanded in the electronics industry. To tune product's performance, variable resistances's resistivity should be changed until it has good performance characteristics. In this paper to automatically regulate the 8mm camcoder's performance, it is proposed variable resistence's center position and orientation detection algorithm by image processing, which has very precise and accurate result. And we found optimal conditions which can have effects on image acquisition process. And real time processing is done by DSP to detect vr's center and orientation. This results make it possible to utilize proposed image processing algorithm and system directly in electronics industry.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.58-62
• /
• 2019

Diffractive Optical Elements(DOEs) diffracts incident light using the diffraction phenomenon of light to generate a desired diffraction image. In recent years, the use of diffraction optics, which can replace existing refractive optical elements with flat plates, has been increased by implementing various optical functions that could not be implemented in refractive optical devices and by becoming miniaturized and compacted optical elements. Direct laser lithography is typically used to effectively fabrication such a diffractive optical element in a large area with a low process cost. In this study, the process conditions for fabricating patterns of diffractive optical elements in various shapes were found using direct laser lithographic system, and optical performance evaluation was performed through fabrication.